Pricing and Availability

Request a Quote

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.


Cross Reference

These part numbers have the same form, fit, and function as 945723-1
Item Number Cage
945723-1 37695


Other parts in this series

Technical Definition

Spacer, Plate, also referenced with federal logistics item name code 26979 - A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.

Q & A

Part number 9457231
What are the historical prices for part number 945723-1?
No pre-dated pricing for this NSN could be found.
Does this part number 945723-1 have a shelf life?
No. There is no shelf life applicable for this part.
Does this part number 945723-1 require Demilitarization?
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9).
Is part number 945723-1 ITAR controlled?
No. This item is not ITAR Controlled.
What is the NSN for part number 945723-1?
Who are the manufacturers of 945723-1 and NSN 5365-01-314-4944?
  • Raytheon Company (CAGE 37695)


Description: Plate Spacer
Part Number 945723-1 945723 1


Hole Diameter: 1/8", Length: 4-61/64", aluminum alloy 5052

AAUB Hole Diameter
0.128 inches
ABHP Overall Length
4.960 inches
ABMK Overall Width
4.800 inches
ADUE Aperture Width
1.250 inches
ADUF Aperture Length
4.500 inches
ADUY Center To Center Distance Between Bolt Holes Along Width
4.200 inches
ADUZ Center To Center Distance Between Bolt Holes Along Length
4.330 inches
ADVD Outside Edge To Bolt Hole Center Distance Along Width
0.260 inches
ADVE Outside Edge To Bolt Hole Center Distance Along Length
0.260 inches
AECS Bolt Hole Quantity
CTRH Outside Edge To Inside Edge Smallest Distance Along Width
0.610 inches
CTSC Outside Edge To Inside Edge Smallest Distance Along Length
0.260 inches
FEAT Special Features
Color yellow,bolts holes countersink to 82 deg to 0.230 in. dia
MATT Material
Aluminum alloy 5052
MDCL Material Spec
Qq-a-250/8,h34 fed spec single material response
SFTT Surface Treatment
STDC Surface Treatment Spec
Mil-c-5541,cl 1a mil spec single treatment response
STYL Style Designator
Non-circular w/bolt holes
National Stock Number (NSN): 5365-01-314-4944