Home » FSC Catalog » Bolts » AIC260E8-34

Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 5306-00-001-4882
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of aic260e8-34
Item Number Cage
VS2005-8-34 06950
EWB26-8-34 56878
C305-8-34 81755
AIC260E8-34 06725

Characteristic Codes

AIC260E8-34 spec. code meanings
Code Translation
AAJD A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
AAJF The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
AASA A measurement of the extent of threads, including incomplete threads, along a line parallel to the longitudinal axis.
AASB The dimension, measured along a line parallel to the longitudinal axis, from the largest bearing surface of the fastener head to the extreme opposite end, or as specifically designated for other type fasteners.
AASK The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
AASU A measurement from the bottom to the top of the head, in distinction from depth.
AAUR The length of a straight line which passes through the center of the grip, and terminates at the circumference.
AHYM The nominal length of a straight line which passes through the center of the threaded portion, and terminates at the circumference.
ANEE A measurement of the longest dimension of the grip, in distinction from width.
CMLP The number of threads on the item per linear inch measured on a line parallel to the thread axis.
CQBC The maximum rated load in tension applied in a longitudinal direction, per unit of cross-sectional area, that the material can withstand without rupture.
CQFM A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
THSD A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.


Description: Shear Bolt
Mfr. Cage 06725


Thread Length: 29/32", Fastener Length: 3-3/64", Thread: 1/2-20, Grip Length: 2-1/8", steel comp h11 overall

AAJD Thread Class
AAJF Thread Direction
AASA Thread Length
From 0.901" and 0.951"
AASB Fastener Length
From 3.036" and 3.066"
AASK Head Style
Double hexagon w/hole
AASU Head Height
0.530 inches
AATB Width Between Flats
From 0.616" and 0.627"
AATC Extended Washer Diameter
From 0.940" and 0.950"
AATD Extended Washer Thickness
0.098 inches
AAUR Grip Diameter
From 0.4985" and 0.4995"
AHYM Nominal Thread Diameter
0.500 inches
ANEE Grip Length
From 2.115" and 2.135"
CMLP Thready Qty Per Inch (tpi)
CQBC Minimum Tensile Strength
260000 pounds per square inch
CQFM Hardness Rating
51.0 rockwell c minimum and 54.0 rockwell c maximum
MATT Material
Steel comp h11
MDCL Material Spec
Ams 6485 assn std single material response or ams 6487 assn std single material response
SFTT Surface Treatment
THSD Thread Series Designator

Technical Definition

Bolt, Shear, also referenced with federal logistics item name code 15903 - A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
National Stock Number (NSN): 5306-00-001-4882

Last Modified: 02/14/2017