Home » FSC Catalog » Bolts » AN9-11A

Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 5306-00-001-4849
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of an9-11a
Item Number Cage
AN9-11A 88044

Characteristic Codes

AN9-11A spec. code meanings
Code Translation
AAJD A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
AAJF The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
AASA A measurement of the extent of threads, including incomplete threads, along a line parallel to the longitudinal axis.
AASB The dimension, measured along a line parallel to the longitudinal axis, from the largest bearing surface of the fastener head to the extreme opposite end, or as specifically designated for other type fasteners.
AASK The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
AASU A measurement from the bottom to the top of the head, in distinction from depth.
AHYM The nominal length of a straight line which passes through the center of the threaded portion, and terminates at the circumference.
ANEE A measurement of the longest dimension of the grip, in distinction from width.
CBBL Those features, not otherwise specified, which may be required for proper functioning of the item.
CMLP The number of threads on the item per linear inch measured on a line parallel to the thread axis.
CQBC The maximum rated load in tension applied in a longitudinal direction, per unit of cross-sectional area, that the material can withstand without rupture.
CQFM A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
THSD A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.


Description: Machine Bolt
Mfr. Cage 88044


Thread Length: 7/8", Fastener Length: 1-17/64", Thread: 9/16-18, Grip Length: 23/64", steel comp 4140 overall or steel comp 8740 overall or steel comp 8735 overall or steel comp 4130 overall

AAJD Thread Class
AAJF Thread Direction
AASA Thread Length
From 0.875" and 0.953"
AASB Fastener Length
From 1.266" and 1.312"
AASK Head Style
AASU Head Height
From 0.296" and 0.328"
AATB Width Between Flats
From 0.865" and 0.877"
AHYM Nominal Thread Diameter
0.562 inches
ANEE Grip Length
From 0.359" and 0.391"
CBBL Features Provided
Finished head
CMLP Thready Qty Per Inch (tpi)
CQBC Minimum Tensile Strength
125000 pounds per square inch
CQFM Hardness Rating
26.0 rockwell c minimum and 32.0 rockwell c maximum
MATT Material
Steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 4130
MDCL Material Spec
Mil-s-5626 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-6098 mil spec 3rd material response or mil-s-6758 mil spec 4th material response
SFTT Surface Treatment
Cadmium and chromate
STDC Surface Treatment Spec
Qq-p-416 ty 2 cl 3 fed spec all treatment responses
THSD Thread Series Designator

Technical Definition

Bolt, Machine, also referenced with federal logistics item name code 01847 - An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
National Stock Number (NSN): 5306-00-001-4849


Solicitation Description Qty UOM Close Date
SPE5E415T9611 Bolt, Machine 2617 EA 05/28/2015

Last Modified: 02/14/2017