Request Pricing & Availability

NSN: 5315-00-003-1680
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Part Numbers

Item Number Item Description
EL904-693-1 Pin, Straight, Headless

Master Requirement Codes

Code Translation
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
CQBB Indicates whether or not the second end is identical to the first end.
ACHT The overall dimension measured along the longitudinal axis, with terminated points at the extreme ends of the pin.
ACHU The overall length of a straight line which passes through the center of the pin, and terminates at the outside circumference.
TEST The specification, standard, drawing, or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

EL904-693-1 Headless Straight Pin

Cage 66850

Technical Definition

Pin, Straight, Headless, also referenced with federal logistics item name code 02390 - A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod, straight, headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin, straight, threaded.

Technical Characteristics

First End Style (AAGZ):
First End Taper Angle (CRMG):
45.0 degrees nominal
First End Taper Length (AMCS):
0.031 inches nominal
Material (MATT):
Copper alloy overall
Second End Relationship With First End (CQBB):
Pin Overall Length (ACHT):
0.344 inches nominal
Pin Overall Diameter (ACHU):
0.1830 inches minimum and 0.1890 inches maximum
Test Data Document (TEST):
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

National Stock Number (NSN)