Request Pricing & Availability

NSN: 5310-00-001-4714
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Part Numbers

Item Number Item Description
NAS1169DD416L Washer, Finishing
NAS1169DD4416L Washer, Finishing

Master Requirement Codes

Code Translation
AAUB The length of a straight line which passes through the center of a hole, and terminates at the circumference.
ABPX A measurement of the smallest dimension of the material, in distinction from length or width.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
ABKV The length of a straight line which passes through the center of a circular figure or body, and terminates at the outside circumference.
ABKW The distance measured in a straight line from the bottom to the top of an item.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
ABMD The length of a straight line which passes through the center of the recess, and terminates at the circumference.
FEAT Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ZZZK The document designator of the specification or standard which established the item of supply.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

NAS1169DD416L Finishing Washer

Cage 04348

Technical Definition

Washer, Finishing, also referenced with federal logistics item name code 15932 - A washer or cone or disk shape with a centrally located hole, designed to accommodate a flat or oval head screw and provide additional bearing area on the material being fastened. it may or may not have a flush flange feature.

Technical Characteristics

Hole Diameter (AAUB):
0.252 inches minimum and 0.282 inches maximum
Material Thickness (ABPX):
0.016 inches nominal
Material (MATT):
Aluminum alloy 2024 overall or aluminum alloy 5052 overall
Outside Diameter (ABKV):
0.745 inches minimum and 0.770 inches maximum
Overall Height (ABKW):
0.125 inches nominal
Material Document And Classification (MDCL):
Qq-a-250/5,t3 fed spec 1st material response overall or qq-a-250/5,t4 fed spec 1st material response overall and qq-a-250/8,0 fed spec 2nd material response overall
Recess Angle (CSTM):
99.0 degrees minimum and 103.0 degrees maximum
Recess Diameter (ABMD):
0.507 inches minimum and 0.517 inches maximum
Special Features (FEAT):
Dyed orange color
Specification/standard Data (ZZZK):
80205-nas1169 professional/industrial association standard
Style Designator (STYL):
Finishing
Surface Treatment Document And Classification (STDC):
Mil-a-8625 mil spec 1st treatment response overall or mil-c-5541 mil spec 2nd treatment response overall
Surface Treatment (SFTT):
Anodize overall or chromate overall

National Stock Number (NSN)

5310-00-001-4714