Thread Size: 9/64"
Actuator Position Designation
At each pole
From 2.490" and 2.510"
Multipole-multiple actuator type
From 2.240" and 2.260"
From 0.130" and 0.150"
Center To Center Distance Between Terminals Parallel To Length
From 1.928" and 1.948"
Center To Center Distance Between Terminals Parallel To Width
From 0.740" and 0.760"
Circuit Protection Type
Overcurrent all locations
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
From 2.052" and 2.072"
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
From 0.740" and 0.760"
External Actuator Linkage Arrangement
One, two, and three linked
Frequency In Hertz
400.0 all locations
Arc Quenching Method
Maximum Continuous Load Current Rating Per Pole
10.0 amperes ac all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1000.0 ac all locations
Mounting Facility Type And Quantity
6 threaded hole
Mounting Surface To Terminal End Distance
From 2.689" and 2.813"
Nominal Thread Size
Operating Voltage Type And Rating Per Pole In Volts
250.0 ac all locations
General purpose warehouse
Inclosure Protection Type For Which Designed
Fungus resistant and moisture resistant
Internal Trip Release Configuration
Series trip all locations
Main Contact Tripping Mechanism Type
Manual Actuator Type And Quantity
Terminal Type And Quantity
6 threaded stud
Thready Qty Per Inch (tpi)
Thread Series Designator
Trip Release Characteristic
Instantaneous all locations
Trip Release Method
Magnetic-hydraulic all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
130.0 all locations
Unpackaged Unit Weight
Circuit Breaker, also referenced with federal logistics item name code 00136
- A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.