NATO Stock Number
5120-01-363-9304
Sold in multiples of
DEMIL
NO
End Application
Aim-120a
Drive Surface Size
0.250 inches single end
Hardness Rating
Between 45.0 rockwell c and 50.0 rockwell c
Functional Description
The wrench is fabricated from a 2.0 inch length of 0.5 inch diameter steel stock; the tool is initially formed by taking a centered flat cut 0.422 deep by 1.5 inch long measured from length wise center of stock; this leaves an upright measuring of 0.25 wide by 0.422inch high at each end
Material
Steel
Surface Treatment
Nickel
Supplementary Features
The wrench point of tool is formed by removing 0.13 inch from top of one upright; material is removed from upright for wrench point by making a hexcut measuring 0.139 p/m 0.003 inch; hex wrench point centerline to be on original centerline of stock; a 1/4 inch power driver 0.75 inch long is welded to remaining upright; centerline of hex driver to be on centerline of wrenchpoint; length of tool to be 2.75 inches