Thread Size: 9/64"
Multipole-multiple actuator type
From 2.480" and 2.500"
2.265 inches maximum
Center To Center Distance Between Terminals Parallel To Length
From 1.925" and 1.955"
Center To Center Distance Between Terminals Parallel To Width
From 0.735" and 0.765"
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
From 2.050" and 2.070"
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
From 0.735" and 0.765"
From 0.135" and 0.165"
Mounting Surface To Terminal End Distance
2.490 inches maximum
Arc Quenching Method
Mounting Facility Type And Quantity
6 threaded hole
General purpose warehouse
Special Handling Feature
Thready Qty Per Inch (tpi)
Maximum Continuous Load Current Rating Per Pole
5.0 amperes ac all locations
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
5000.0 ac all locations
Circuit Protection Type
Overcurrent all locations
Trip Release Method
Magnetic all locations
Trip Release Characteristic
Instantaneous all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
125.0 all locations
Main Contact Tripping Mechanism Type
Manual Actuator Type And Quantity
Actuator Position Designation
At each pole
External Actuator Linkage Arrangement
One, two, and three linked
Internal Trip Release Configuration
Series trip all locations
Nominal Thread Size
Inclosure Protection Type For Which Designed
Moisture resistant and salt spray proof and shock resistant and vibration resistant and fungus resistant
Frequency In Hertz
50.0 all locations or 60.0 all locations
Unpackaged Unit Weight
Thread Series Designator
Terminal Type And Quantity
6 threaded stud
Circuit Breaker, also referenced with federal logistics item name code 00136
- A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.