NATO Stock Number
3416-00-826-3890
Sold in multiples of
1 EA
DEMIL
NO
Mounting Type
Bench
Current Type
Ac
Center To Center Distance
33.000 inches
Performance Type
Standard duty
Purpose For Which Designed
General
Accessory Components And Quantity
1 chuck, collet, spindle nose, 1/16to1-3/8 in.; 1 chuck, drill, 3 jaw, 1/16to1/2 in.No2 morse taper shank; 1 chuck, lathe, 3 jaw, univ., 6 in.; 1 chuck, lathe, 4 jaw, ind., 6 in.; 1 collet set, multiple jaw, molded rubber c/o collet 1/16to1/8 in.; 1 ea collet 1/8to1/4, 1/4to3/8, 3/8to1/2, 1/2to5/8, 5/8to3/4, 3/4to7/8, 7/8to1 in.; 1 ea dog, tail bent, 1/2, 3/4, 1, 1-1/4, 1-1/2; 1 dog, clamp, 1-3/4 in.; 1 ea faceplate, lathe, 6, 8-1/2 in.; 1 gear set, metric transposing, english grad.C/o gear, 26, 28, 32, 36, 40, 48 teeth; 1 gear assembly., compound metric w/110 and 127 teeth; 1 holder, lathe tool, boring bar; 1 holder, lathe tool, cutting off, lh, rh offset and straight; 1 ea holder, lathe, turning tool, lh, rh offset and straight; 1 knurling tool, w/3 pr knurls; 1 ea, plug, collet, rubber, 1/8to3/8, 1/2to5/8, 3/4to7/8, 1to1-1/8 in.; 1 ea, rest, followr, steady
Design Type
Screw
Electric Motor Horsepower Rating
0.75
Bed Type
Solid
Electric Motor Quantity
1
Spindle Speed Quantity
8
Rated Swing
10.000 inches
Actual Swing Over Bed
10.000 inches
Swing Over Cross Slide
5.750 inches
Thread Change Quantity
48
Headstock Drive Type
Direct pulley, back geared
Headstock Center Taper Size Designator
2 asa standard
Hole Diameter Through Spindle
1.375 inches
Carriage Quantity
1
Carriage Longitudinal Feed Operation Method
Hand and power
Carriage Cross Feed Operation Method
Hand and power
Gear Change Type
Quick
Thread Quantity Range
+4.000/+80.000 per inch
Voltage In Volts
220.0
Phase
Three
Frequency In Hertz
60.0
Nondefinitive Specification/std Data
2 type and 3 class
