Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
The last inventory check on this NSN was done on 05/16/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $350.77 to $584.62.. | |
Does NSN 9150-00-408-9635 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Poland, Brazil, Spain, Singapore, Malaysia, Australia, Belgium, Canada, New Zealand, Germany, Republic Of Korea, United Kingdom, Portugal, Italy, Greece, and Turkey | |
What is the NIIN of NSN 9150-00-408-9635? | |
004089635 or 00-408-9635 | |
Does NSN 9150-00-408-9635 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-408-9635? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jul 17, 1970 |
Routes of entry: inhalation: unknown skin: unknown ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: low health hazards;may cause
irritation of eyes,skin,respiratory or g.I.Tracts.
explanation of carcinogenicity: data per msds
effects of overexposure: on rare occasions,hypersensitive indviduals may
develop skin allergies,in this case call a physician
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.892
solubility in water: negligible
appearance and odor: black smooth grease,mild odor
percent volatiles by volume: unkn
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extreme heat
hazardous decomposition products: nitrogen oxides,phosphorus
oxides,carbon monoxide
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic oil
fraction by wt: >60%.
ingred name: acetone (sara iii)
cas: 67-64-1
rtecs #: al3150000
fraction by wt: 2%.
osha pel: 1000ppm
acgih tlv: 750ppm/1000stel;9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9293
ingred name: additives & other ingred
fraction by wt:
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-may be mildly irritation to the
eyes. Skin-may cause skin disorders such as dermatitis,
folliculities or oil acne. Release during high pressure usgae may
result in injection of oil into the skin. inhalation-not expected
to be a relevant route of exposure. However, under high
temperature, vapors are irritation to the nose, throat and upper
respiratory tract may be produced. Ingestion-no speicif ic
information identified.
explanation of carcinogenicity: this product does not contain any
carcinogens identified by iarc, ntp or osha.
effects of overexposure: irritation as noted. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: pre-existing eye and skin disorders
may be aggravated by exposure to this product.
First aid: eye-flush with water for 15 min while holding eyelids open.
get medical attention. Skin-remove contaminated clothing. Wipe
excess off. Wash with soap/water or a waterless hand cleaner
followed by soap /water. Do no reuse clothing until cleaned. If
irritation persists, get medical attention. If material is injected
under skin, get medical attention to prevent serious damage. Do not
wait for symptoms to deveop. Inhalation-remove victim to fresh
air. Provide oxygen if breathing is difficult. Get medical
attention. Ingestion-do not induce vomiting, in general no
treatment is needed. However, get medical advice.
Hcc: n1
evaporation rate & reference: n/a (nbuac=1)
solubility in water: insoluble
appearance and odor: black buttery grease, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat, open flames.
hazardous decomposition products: carbon monoxide and unidentified
organic compounds may be formed upon combustion.
Waste disposal methods: dispose of in an appropiate disposal facility in
compliance with local regulations.
Ingred name: polyalphaolefins
cas: 68037-01-4
minumum % wt: 60.
maxumum % wt: 65.
ingred name: organophilic clay
cas: 71011-25-1
minumum % wt: 5.
maxumum % wt: 10.
ingred name: molybdenum diisulfide
cas: 1317-33-5
rtecs #: qa4670000
minumum % wt: 3.
maxumum % wt: 8.
osha pel: 5mg/cum,as(mo)solubl
acgih tlv: 5mg/cum,as(mo)solubl
ingred name: sodium nitrite
cas: 7632-00-0
rtecs #: ra1225000
< wt: 1.5
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: graphite
cas: 7782-42-5
rtecs #: md9559600
minumum % wt: 2.
maxumum % wt: 4.
osha pel: 15 mppcf rdust
acgih tlv: 2 mg/m3 rdust; 9293
ingred name: synthetic esters
cas: 68424-31-7
< wt: 3.
ingred name: other additives
< wt: 16.
Ld50 lc50 mixture: oral toxicity (rats): slightly toxic
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- slight eye irritation. Slight
skin irritation. Chronic- none known.
effects of overexposure: slight eye and skin irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.
First aid: get medical attention if symptoms persist. Skin: wash with
soap & water. Eye: flush with water for 15 minutes, holding eyelids
open. Inhaled: remove to fresh air & provide oxygen/cpr if needed.
oral: not expected to be a problem. If greater than 0.5 liter
(pint) ingested & conscious, give 1-2 glasses of water & call
physician/poison control center.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.892
solubility in water: negligible
appearance and odor: black smooth grease, mild odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extreme heat
hazardous decomposition products: nitrogen oxides, phosphorus oxides,
carbon monoxide
Waste disposal methods: product is suitable for burning in an enclosed
controlled burner for fuel value or can be recycled. Observe all
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl alcohol (methanol) (sara iii)
cas: 67-56-1
rtecs #: pc1400000
fraction by wt: < 0.01%
other rec limits: none specified
osha pel: s,200ppm/250stel
acgih tlv: s,200ppm/250stel; 93
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 1%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9293
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 1%
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 5%
other rec limits: none specified
osha pel: 10 mg/m3 (mfr) as mo
acgih tlv: 10 mg/m3 (mfr) as mo
Ld50 lc50 mixture: ld50 (oral rat) is >5 g/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none specified by manufacturer.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: on rare occasions, hypersensitive individuals
may develop skin allergies. If this occurs, remove from further
exposure and seek advice of a physician.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye-flush with water. Skin-wash contact area with soap &
water. High pressure accidental injection through the skin requires
immediate medical attention. Inhalation-not expected to be a
problem. Inges tion-not expected to be a problem. However, if
greater than 1/2 liter ingested, immediately give 1 to 2 glasses of
water & call a physician, hospital or poison control center. Do not
induce vomiting.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: na
vapor pres:
vapor density: na
spec gravity: 0.892
ph: na
viscosity: 5.2 cst
evaporation rate & reference: na
solubility in water: negligible
appearance and odor: black smooth grease, mild odor.
percent volatiles by volume: na
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: extreme heat.
hazardous decomposition products: nitrogen oxides, phosphorus oxides,
carbon monoxide.
Waste disposal methods: dispose of waste at an appropiate waste disposal
facility in accordance with current applicable laws and
regulations, and product characteristics at time of disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic oil
fraction by wt: >69%
other rec limits: none recommended
ingred name: additives and other ingredients
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: oral (rat) ld50 is >2000 mg/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- slight eye irritation. Slight
skin irritation. Ingestion: practically non-toxic. Chronic- none
known.
effects of overexposure: slight eye and skin irritation.
medical cond aggravated by exposure: none known.
First aid: get medical attention if symptoms persist. Skin: wash with
soap & water. Eye: flush with water for 15 minutes, holding eyelids
open. Inhalation: remove to fresh air & provide oxygen/cpr if
needed. Inge stion: not expected to be a problem. If greater than
0.5 liter (pint) ingested & conscious, give 1-2 glasses of water &
call physician/poison control center.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.892
solubility in water: negligible
appearance and odor: black grease, mild odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extreme heat
hazardous decomposition products: nitrogen oxides, phosphorus oxides,
carbon monoxide
Waste disposal methods: product is suitable for burning in an enclosed
controlled burner for fuel value or can be recycled. Observe all
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 5%
other rec limits: none specified
osha pel: 10 mg/m3 (mfr) as mo
acgih tlv: 10 mg/m3 (mfr) as mo
ingred name: acetone (sara iii)
cas: 67-64-1
rtecs #: al3150000
fraction by wt: 2%
other rec limits: none recommended
osha pel: 750ppm/1000 stel
acgih tlv: 750ppm/1000stel;9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 1%
other rec limits: none recommended
osha pel: 10 mg/m3 tdust
acgih tlv: 10 mg/m3; 9293
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 1%
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs