Worldwide distributor of NSN parts and consumables located in the USA.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE7MC21T039A | 2021-04-12 | PMCMU | 108 KT |
SPE7M120T318D | 2020-05-04 | PMCM5 | 5 KT |
SPE7M120T315Z | 2020-05-04 | PMCM5 | 1 KT |
SPE7M120T299Q | 2020-04-27 | PMCM5 | 1 KT |
SPE7M120T294Q | 2020-04-24 | PMCM5 | 2 KT |
SPE7M120T232P | 2020-04-06 | PMCM5 | 1 KT |
SPE7M120T153Z | 2020-03-23 | DAT00 | 108 KT |
SPE7M120T142U | 2020-03-16 | PMCMK | 5 KT |
SPE7M120T136V | 2020-03-09 | PMCMK | 1 KT |
SPE7M120T122L | 2020-03-09 | PMCMK | 2 KT |
The last inventory check on this NSN was done on 09/29/2021. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ESDA - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
147650 - Outfits military equip for repair
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
P - 77.5
V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $1,528.02 to $2,546.71.. | |
Does NSN 2090-00-372-6064 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Department Of The Navy, U.s. Coast Guard, Poland, Brazil, Spain, Singapore, Malaysia, Thailand, Australia, Belgium, Republic Of Korea, Greece, and Turkey | |
What is the NIIN of NSN 2090-00-372-6064? | |
003726064 or 00-372-6064 | |
Does NSN 2090-00-372-6064 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 2090-00-372-6064? | |
Solicitation SPE7MC21T039A for qty 108 on 04/05/2021 | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: see signs & symptoms of overexposure.
user should consult current permissible levels of exposure for
asbestos.
explanation of carcinogenicity: asbestos: iarc,human carc group
1.Npt: known to be carc.Osha: cancer & lung disease hazard.Acgih
confirmed human carc
effects of overexposure: primary irritation to skin on prolonged or
repeated contact.Can be irrit to eyes.Can cause headache on
prolonged exposure.
First aid: inhal: remove victim to fresh air appy artifical resp.If
required,get med .Help skin: wash throroughly w/ soap & h*20 or
waterless cleanser.If irritation persists get medical
help.Eyes: flush w/ h*20 for at least 15 minutes.Get phys
asst.Ingest: induce vomiting.If conscious get medical assistance
immediately.
Hcc: n1
boiling pt: b.P. Text: nd mfr
vapor pres: no (mfr)
solubility in water: very slight
appearance and odor: white paste w/ a characteristic odor
Stability indicator/materials to avoid: yes
oxidizing agents agents and mineral acids.
stability condition to avoid: oxidizing agents and acids and high
temperatures
hazardous decomposition products: carbon monoxide,carbon dioxide and
smoke,.
Waste disposal methods: burn in an approved chemical incinerator or bury
in an approved landfill that mests federal,state,&local pollution
regulations & ordinances.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: duramite
cas: 471-34-1
rtecs #: ff9335000
fraction by wt:
other rec limits:
osha pel:
acgih tlv:
ingred name: epon 828
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt:
other rec limits:
osha pel:
acgih tlv:
ingred name: resorcinol (sara iii)
cas: 108-46-3
rtecs #: vg9625000
fraction by wt:
other rec limits:
osha pel: 10 ppm/20 stel
acgih tlv: 10 ppm/20 stel; 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: 4-butanolide
cas: 96-48-0
rtecs #: lu3500000
fraction by wt:
other rec limits:
osha pel:
acgih tlv:
ingred name: abestos
cas: 1331-21-4
fraction by wt:
other rec limits:
osha pel: 2.0fibers/cc
acgih tlv: 0.2 fibers/cc
ingred name: titanium dioxide
cas: 1317-80-2
fraction by wt:
other rec limits: n/k fp-n
osha pel: n/k fp-n
acgih tlv: n/k fp-n
ingred name: clay
cas: 1332-58-7
fraction by wt:
other rec limits: 30 mppcf.
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
ingred name: silica, amorphous, dust
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: .
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3; 8990
ingred name: silicon dioxide, amorphous
cas: 112945-52-5
rtecs #: vv7310000
osha pel: 20 mppcf
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: see ingredients
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: can result in skin irritation
after repeated or prolonged exposure. Chronic: no information
found.
explanation of carcinogenicity: not relevant
effects of overexposure: prolonged or repeated exposure can cause
headache, respiratory irritation, irritation to skin/eyes. Can
produce a skin rash, irritation and redness of skin. Can cause
alimentary tract and stomach disc omfort if ingested.
medical cond aggravated by exposure: allergies, skin abrasions, head
colds and existing skin abnormalities.
First aid: inhal: remove victim to fresh air, give oxygen, apply cpr if
required. Get medical help. Skin: wash thoroughly with soap &
water. If irritation persists, get medical attention. Eyes: flush
with water for at least 15 minutes and get medicalattention.
ingestion: if patient is conscious, give large quantities of water,
get medical help.
Boiling pt: b.P. Text: >250f,>121c
spec gravity: 1.1-1.2
solubility in water: very slight
appearance and odor: white colored liquid with a characteristic odor
Stability indicator/materials to avoid: yes
oxidizing agents and mineral acids.
stability condition to avoid: oxidizing agents and acids. High
temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide and
smoke.
Waste disposal methods: react this part c with part d and dispose i/a/w
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epon 820, epoxide oral rat, ld50: 11400 mg/mk
cas: 25068-38-6
rtecs #: sl6475000
ingred name: reactive epoxy diluent
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192
ingred name: silicon dioxide, amorphous oral rat, ld50: 3160 mg/kg
cas: 112945-52-5
rtecs #: vv7310000
osha pel: 20 mppcf
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: skin irritation and redness.
chronic: may cause sensitization. Vapors may cause nausea &
irritation of the skin & eyes. Known sensitizer, may cause skin
rash. Can cause alimentary tract stomach discomfort if ingested.
explanation of carcinogenicity: not relevant
effects of overexposure: nausea, irritation of skin & eyes. A known
sensitizer, may cause rash with prolonged or repeated use. If
ingested can cause alimentary tract and stomach discomfort.
medical cond aggravated by exposure: abrasions, head colds.
First aid: immediately flush eyes with plenty of water for at least 15
min. Get medical attention. Skin: wash with mild soap & water all
exposed skin surfaces. Inhalation: remove victim to fresh air. Give
oxygen if breathing is difficult. Call a physician. Remove
contaminated clothing and launder before reuse.
Vapor pres: 22mmhg68f
spec gravity: 1.0 +or-.1
solubility in water: very slight
appearance and odor: pale yellow liquid with a characteristic odor
Stability indicator/materials to avoid: yes
acids and oxidizing agents.
stability condition to avoid: prolonged storage >90f.
hazardous decomposition products: burning may produce nitrogen oxides,
carbon monoxide and/or carbon dioxide.
Waste disposal methods: react this part d with part c and dispose i/a/w
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
cas: 68082-29-1
ingred name: amine-adduct epoxy hardener
cas: 38294-69-8
Ld50 lc50 mixture: ld50: (oral,rat) >10,000 mg/kg.
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: irritation, sensitization and
dermatitis. Chronic: 2-year dermal study in mice: no treatment
related effects. 2-year skin painting studies: a) c3hf/bd mice: no
increased tumor incidence. B) c57bl/6bd mice: slight increase in
epidermal localized carcinomas at high dose. C) c3h mice: no
tumors.
explanation of carcinogenicity: not relevant.
effects of overexposure: see health hazards.
medical cond aggravated by exposure: allergy, eczema or skin conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. Call a physician. Skin: promptly wash with mild soap and
water. Ingest: if conscious, give large quantities of water. Get
medical atten tion. Inhal: remove to fresh air. Give oxygen if
breathing is difficult. Other: promptly remove wet contaminated
non-impervious clothing. Wash before reuse.
Hcc: n1
boiling pt: b.P. Text: >392f,>200c
vapor pres: 1 @ 180 c
spec gravity: 1.17
solubility in water: insoluble
appearance and odor: clear liquid, slight odor.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: elevated temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: strong acids or bases in bulk.
Waste disposal methods: dispose in accordace with federal, state and
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a diglycidyl ether resin; (phenol,
4'4'-(1-methylethylidene)bis-,polymer with (chloromethyl) oxirane)
cas: 25068-38-6
rtecs #: sl6475000
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhal: vapors are irritating to
nose & throat. Excessive exposure may result in headache, dizziness
& nausea. Ingest: not toxic. Skin: defatting to skin. Eyes: vapor
irritating. Causes severe irrita tion. Chronic: none known.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: immed flush w/plenty of water for at lst 15 mins. Call
md. Skin: thoro flush w/soap & water. Remove contam clthg & shoes.
see md. Wash clthg before reuse. Discard shoes. Inhal: remove to
fresh air. If not brthg, give artf resp, pref mouth to mouth. If
brthg is dfclt, give oxygen. Call md. Ingest: immed give lg amts of
water/milk. Do not aspirate stom contents. Call md.
Spec gravity: 0.98
evaporation rate & reference:
appearance and odor: material is amber liquid w/amine odor.
percent volatiles by volume: none
Stability indicator/materials to avoid: yes
oxidizing agents & acids.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: co, co*2 & no*x.
Waste disposal methods: dispose of as hazardous waste in an approved
waste disposal facility i/a/w all federal, state & local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt:
osha pel: 1 ppm
acgih tlv: 1 ppm, s
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt:
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation: can cause headache
on prolonged exposure and can irritate respiratory passages. Skin:
irritation to skin on prolonged or repeated exposure. Skin
absorption can produce a skin rash, irritation and redness of
skin. Eyes: can be irritating to eyes. Ingestion: if ingested, can
cause (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: alimentary tract and stomach
discomfort. Chronic: no information found.
medical cond aggravated by exposure: allergies, skin abrasions, head
colds and existing skin abnormalities.
First aid: inhalation: remove victim to fresh air, give oxygen, apply
artificial respiration if required. Get medical help. Skin: wash
thoroughly with soap & water. If irritation persists, get medical
attention. Eyes: flush with water for at least 15minutes. Get
medical attention. Ingestion: if conscious, give large quantities
of water. Get medical attention.
Boiling pt: b.P. Text: >250f,>121c
spec gravity: 1.1-1.2(h*2o=1)
solubility in water: very slight
appearance and odor: pale yellow, clear liquid; slight, characteristic
odor.
Stability indicator/materials to avoid: yes
oxidizing agents and mineral acids.
stability condition to avoid: oxidizing agents and acids. High
temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide and
smoke.
Waste disposal methods: react this part a with the part b and dispose in
accordance with federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a-epichlorohydrin copolymer; (epoxide resin)
cas: 25068-38-6
rtecs #: sl6475000
osha pel: n/k
acgih tlv: n/k
ingred name: 2(3h)-furanone, dihydro-; (gamma-butyrolactone). Vp: 1 @
68f.
cas: 96-48-0
rtecs #: lu3500000
osha pel: n/k
acgih tlv: n/k
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: clay (kaolin); (hydrated aluminum silicate)
cas: 1332-58-7
rtecs #: gf1670500
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust
ingred name: calcium carbonate
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: milled glass 9007 1-32; (milled glass)
cas: 65997-17-3
osha pel: n/k
acgih tlv: 10 mg/m3 (mfr)
ingred name: silicon dioxide (amorphous); (silicon dioxide, amorphous)
cas: 67762-90-7
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: a known sensitizer which may cause
skin rash with prolonged or repeated contact and can cause
irritation of the nose, throat and lungs. Inhalation: may cause
nausea and can be irritating to air passage s upon prolonged
exposure. Skin contact: may cause irritation with prolonged or
repeated contact. Skin (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: absorption: irritation, redness &
itching. Eye contact: prolonged exposure to vapors can cause
irritation. Ingestion: health risks are not usual. If ingested, can
cause abdominal discomfort.
medical cond aggravated by exposure: skin abrasions & head colds.
First aid: ingest: call md immediately . Eyes: immediately flush w/water
for at least 15 minutes. Call md. Skin: wash affected exposed
surfaces w/mild soap & water. Remove contaminated clothing &
launder befo re reuse. Inhal: remove victim to fresh air. Give
oxygen if breathing is difficult. Call md.
Vapor pres: see ing 2
solubility in water: very slight
appearance and odor: dark paste w/amine odor.
Stability indicator/materials to avoid: yes
acids & oxidizing agents.
stability condition to avoid: prolonged storage over 90f.
hazardous decomposition products: burning may produce nitrogen oxides,
carbon monoxide &/or carbon dioxide.
Waste disposal methods: react this part b with part a & dispose of i/a/w
federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: resorcinol; (triphenyl phosphate) (cercla)
cas: 108-46-3
rtecs #: vg9625000
osha pel: 10 ppm
acgih tlv: 10 ppm;20 stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: ethanol, 2,2',2"-nitrilotri-; (triethanolamine). Vp: 0.0 @
77f.
cas: 102-71-6
rtecs #: kl9275000
osha pel: n/k
acgih tlv: 5 mg/m3
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
osha pel: n/k
acgih tlv: n/k
ingred name: polyamide resin
cas: 68410-23-1
osha pel: n/k
acgih tlv: n/k
ingred name: aluminum silicate
cas: 12269-78-2
osha pel: n/k
acgih tlv: n/k
ingred name: milled glass 9007 1-32; (milled glass)
cas: 65997-17-3
osha pel: n/k
acgih tlv: 10 mg/m3 (mfr)
ingred name: silicon dioxide (amorphous); (silicon dioxide, amorphous)
cas: 67762-90-7
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: skin irritation and redness.
inhalation: vapors may cause nausea and may be irritating. Skin
contact: vapors can cause irritation upon repeated or prolonged
contact. Redness of skin. Skin absorp tion: a known sensitizer, may
cause rashwith prolonged or repeated use. Eye contact: vapors can
cause (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: irritation upon repeated or prolonged
contact. Ingestion: if ingested, can cause alimentary tract and
stomach discomfort. Chronic: may cause sensitization.
medical cond aggravated by exposure: allergies, skin wounds & abrasions
& head colds.
First aid: ingest: call md immediately . Eyes: immediately flush w/plenty
water for at least 15 minutes. Get medical attention. Skin: wash
w/mild soap & water all exposed surfaces. Remove contaminated
clothin g & launder before reuse. Inhal: remove victim to fresh air.
give oxygen if breathing is difficult. Call md.
Vapor pres: see ing 3
spec gravity: 1+/-0.1(h*2o=1)
solubility in water: very slight
appearance and odor: pale yellow liquid w/characteristic odor.
Stability indicator/materials to avoid: yes
acids & oxidizing agents.
stability condition to avoid: prolonged storage over 90f.
hazardous decomposition products: burning may produce nitrogen oxides,
carbon monoxide &/or carbon dioxide.
Waste disposal methods: react this part b with part a & dispose
according to federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
cas: 68410-23-1
osha pel: n/k
acgih tlv: n/k
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
osha pel: n/k
acgih tlv: n/k
ingred name: phenol,4-nonyl-,branched; (alkyl phenol). Vp: 0.0 @ 68f.
cas: 84852-15-3
rtecs #: sm5650000
osha pel: n/k
acgih tlv: n/k
ingred name: epoxy resin; (epoxide resin)
cas: 25085-99-8
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: can cause irritation to
nose, throat and lungs. Can cause headache on prolonged exposure.
skin and eye contact: primary irritation on prolonged or repeated
contact. Can be irritating. Prol onged or repeated contact can
cause sensitization. Skin absorption: irritation. Ingest: health
risks (efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: health hazards: are not usual. Symptom is
abdominal discomfort if ingested.
medical cond aggravated by exposure: skin abrasions and head colds.
First aid: inhal: remove victim to fresh air. Give oxygen, apply
artificial respiration if required. Get medical help. Skin: wash
thoroughly with soap and water. If irritation persists, get medical
attention. Ey es: flush with water for at least 15 minutes. Get
md's assistance. Ingestion: induce vomiting if conscious. Get
medical assistance immediately.
Vapor pres: see ing 2
evaporation rate & reference: not applicable.
solubility in water: very slight.
appearance and odor: white paste with characteristic odor.
Stability indicator/materials to avoid: yes
oxidizing agents and mineral acids.
stability condition to avoid: high temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide &
smoke.
Waste disposal methods: react this part a with part b. Burn in an
approved incinerator or bury in an approved landfill that meets
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin; (epoxide resin)
cas: 25068-38-6
rtecs #: kc2100000
osha pel: n/k
acgih tlv: n/k
ingred name: 2(3h)-furanone, dihydro-; (gamma-butyrolactone). Vp: 1 @
68f.
cas: 96-48-0
rtecs #: lu3500000
osha pel: n/k
acgih tlv: n/k
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: clay (kaolin); (hydrated aluminum silicate)
cas: 1332-58-7
rtecs #: gf1670500
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust
ingred name: calcium carbonate
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: milled glass 9007 1-32; (milled glass)
osha pel: n/k
acgih tlv: 10 mg/m3 (mfr)
ingred name: silicon dioxide (amorphous); (silicon dioxide, amorphous)
cas: 67762-90-7
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: ld50 (oral, rat) is 1080-2330 mg/kg.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- eyes: may cause irritation, burns, even
blindness. Skin: may cause severe burns. Has caused allergic skin
reactions. Inhale: vapors may cause res piratory system irritation.
oral: ingestion may cause gastrointestinal tract irritation.
chronic- unknown.
explanation of carcinogenicity: none
effects of overexposure: severe irritation, redness, swelling, corneal
injury, nausea, vomiting, severe pain, ulceration
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes/skin: immediately flush with
water for 15 minutes. Hold eyelids open. Oral: do not induce
vomiting. If conscious, drink plenty of water or milk. Seek
immediate medical attention. If vomiting occurs, keep head below
hips. Do not give anything by mouth to an unconscious person.
Hcc: b2
nrc/state lic num: not relevant
boiling pt: b.P. Text: 390f,199c
vapor pres:
vapor density: 3.56
spec gravity: 1.4
evaporation rate & reference: nil
solubility in water: soluble
appearance and odor: black paste with amine odor
Stability indicator/materials to avoid: yes
oxidizing agents, acids, halogenated organic compounds, aldehydes,
ketones, acrylates
stability condition to avoid: temperatures of 676f
hazardous decomposition products: smoke, carbon monoxide, carbon
dioxide, nitrogen oxides may be formed.
conditions to avoid polymerization: addition of large mass of epoxy
resin
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Reusing is recommended.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol an epoxy resin/diethylenetriamine adduct
fraction by wt: 60 - 69%
other rec limits: none recommended
ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 30 - 39%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 1 - 3%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9596
Ld50 lc50 mixture: ld50 (oral, rat) is 1080-2330 mg/kg.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- eyes: may cause irritation, burns, even
blindness. Skin: may cause severe burns. Has caused allergic skin
reactions. Inhale: vapors may cause res piratory system irritation.
oral: ingestion may cause gastrointestinal tract irritation.
chronic- unknown.
explanation of carcinogenicity: none
effects of overexposure: severe irritation, redness, swelling, corneal
injury, nausea, vomiting, severe pain, ulceration
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes/skin: immediately flush with
water for 15 minutes. Hold eyelids open. Oral: do not induce
vomiting. If conscious, drink plenty of water or milk. Seek
immediate medical attention. If vomiting occurs, keep head below
hips. Do not give anything by mouth to an unconscious person.
Hcc: b2
nrc/state lic num: not relevant
boiling pt: b.P. Text: 390f,199c
vapor pres:
vapor density: 3.56
spec gravity: 1.05
solubility in water: soluble
appearance and odor: light straw colored liquid with amine odor
Stability indicator/materials to avoid: yes
oxidizing agents, acids, halogenated organic compounds, aldehydes,
ketones, acrylates
stability condition to avoid: temperatures of 676f
hazardous decomposition products: smoke, carbon monoxide, carbon
dioxide, nitrogen oxides may be formed.
conditions to avoid polymerization: addition of large mass of epoxy
resin
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Reusing is recommended.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a, epichlorohydrin, diethylenetriamine adduct
cas: 68610-56-0
fraction by wt: 55 - 60%
other rec limits: none recommended
ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 40 - 45%
other rec limits: none recommended
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9596
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- eyes: may cause irritation. Skin: may cause
irritation. May cause skin sensitization. Inhale: single exposure to
vapors is not likely to be hazar dous. Oral: unknown. Chronic-
unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation, redness, nausea, vomiting,
sensitization
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes/skin: immediately flush with
water for 15 minutes. Hold eyelids open. Oral: if conscious & large
amoun ts are ingested, induce vomiting. Seek medical attention.
Hcc: b2
nrc/state lic num: not relevant
spec gravity: 1.3 - 1.5
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: stiff white paste with faint epoxy odor
Stability indicator/materials to avoid: yes
bases
stability condition to avoid: excessive heat over long periods of time
hazardous decomposition products: smoke, carbon monoxide, carbon
dioxide, various phenolic compounds may be formed.
conditions to avoid polymerization: uncontrolled contact with amines
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Reusing is recommended.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 25085-99-8
fraction by wt: 60 - 65%
other rec limits: none recommended
ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 25 - 30%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 5 - 7%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: silicone dioxide/silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 1 - 3%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- eyes: may cause irritation. Skin: may cause
irritation. May cause skin sensitization. Inhale: single exposure to
vapors is not likely to be hazar dous. Oral: unknown. Chronic-
unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation, redness, nausea, vomiting,
sensitization
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes/skin: immediately flush with
water for 15 minutes. Hold eyelids open. Oral: if conscious & large
amoun ts are ingested, induce vomiting. Seek medical attention.
Hcc: b2
nrc/state lic num: not relevant
spec gravity: 1.16
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: water white to light yellow, medium viscosity
liquid with faint epoxy odor
Stability indicator/materials to avoid: yes
bases
stability condition to avoid: excessive heat over long periods of time
hazardous decomposition products: smoke, carbon monoxide, carbon
dioxide, various phenolic compounds may be formed.
conditions to avoid polymerization: uncontrolled contact with amines
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Reusing is recommended.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: reaction products of epichlorohydrin & bisphenol a
cas: 25085-99-8
fraction by wt: 100%
other rec limits: none recommended
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: can result in skin irritation
after repeated or prolonged exposure. Chronic: no information
found.
effects of overexposure: inhalation: can cause headache on prolonged
exposure and can irritate respiratory passages. Skin and eye
contact: irritation to skin on prolonged or repeated exposure. Can
be irritating to eyes. Skin absorption: can produce a skin rash,
irritation and redness of skin. ingestion: if ingested, can cause
alimentary tract and stomach discomfort.
medical cond aggravated by exposure: allergies, skin abrasions, head
colds and existing skin abnormalities.
First aid: inhalation: remove victim to fresh air, give oxygen, apply
artificial respiration if required. Get medical help. Skin: wash
thoroughly with soap and water. If irritation persists, get medical
attentio n. Eyes: flush with water for at least 15minutes. Get
medical attention. Ingestion: if patient is conscious, give large
quantities of water. Get medical attention.
Hcc: v5
boiling pt: >121.1c, 250.F
spec gravity: 1.1-1.2(h*2o=1)
solubility in water: very slight
appearance and odor: pale yellow, clear liquid; slight, characteristic
odor.
Stability indicator/materials to avoid: yes
oxidizing agents and mineral acids.
stability condition to avoid: high temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide and
smoke.
Waste disposal methods: react this part a with the part b and dispose in
accordance with federal, state and local regulations.
Ingred name: (epoxide resin)
cas: 25068-38-6
rtecs #: sl6475000
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute and chronic: prolonged or
repeated contact with skin can cause sensitization.
explanation of carcinogenicity: no information found.
effects of overexposure: iinhalation: can cause irritation to nose,
throat and lungs. Can cause headache on prolonged exposure. Skin
and eye contact: primary irritation to skin on prolonged or
repeated contact. Can be irritat ing to eyes. Skin absorption:
irritation of skin. Ingestion: ingestion health risks are not
usual. Symptom is abnormal discomfort if ingested.
medical cond aggravated by exposure: skin abrasions and head colds.
First aid: inhalation: remove victim to fresh air. Give oxygen, apply
artificial respiration if required. Get medical help. Skin: wash
thoroughly with soap and water. If irritation persists, get medical
attentio n. Eyes: flush with water for at least 15 minutes. Get
physician's assistance. Ingestion: induce vomiting if conscious.
get medical assistance immediately.
Hcc: v5
boiling pt: b.P. Text: n/d
spec gravity: 1.1-1.2 h20=1
evaporation rate & reference: not applicable.
solubility in water: very slight.
appearance and odor: white paste with a characteristic odor.
Stability indicator/materials to avoid: yes
oxidizing agents and acids.
stability condition to avoid: high temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide and
smoke.
Waste disposal methods: react this part a with part b. Burn in an
approved incinerator or bury in an approved landfill that meets
federal, state and local regulations.
Ingred name: epoxy resin; (epoxide resin)
cas: 25068-38-6
rtecs #: kc2100000
osha pel: n/k
acgih tlv: n/k
ingred name: 2(3h)-furanone, dihydro-; (gamma-butyrolactone). Vp: 1 @
68f.
cas: 96-48-0
rtecs #: lu3500000
osha pel: n/k
acgih tlv: n/k
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: clay (kaolin); (hydrated aluminum silicate)
cas: 1332-58-7
rtecs #: gf1670500
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust
ingred name: calcium carbonate
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: milled glass
cas: 65997-17-3
acgih tlv: 10 mg/m3
ingred name: silicon dioxide (amorphous); (silicon dioxide, amorphous)
cas: 67762-90-7
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute and chronic: a known sensitizer
which may cause skin rash with prolonged or repeated contact and
can cause irritation of the nose, throat and lungs.
explanation of carcinogenicity: no information found.
effects of overexposure: inhalation: may cause nausea and can be
irritating to air passages upon prolonged exposure. Skin and eye
contact: may cause skin irritation with prolonged or repeated
contact. Prolonged exposure to va pors can cause eye irritation.
skin absorption: irritation of skin. Redness and itching.
ingestion: ingestion health risks are not usual. If ingested, can
cause abdominal discomfort.
medical cond aggravated by exposure: skin abrasions and head colds.
First aid: eyes: immediately flush with water for at least 15 minutes.
call a physician. Skin: wash with mild soap and water affected
exposed skin surfaces. Inhalation: remove victim to fresh air. Give
oxygen if breathing is difficult call a physician. Remove
contaminated clothing and launder before reuse.
Hcc: v5
boiling pt: b.P. Text: n/d
spec gravity: 1.1-1.2 h20=1
solubility in water: very slight
appearance and odor: black paste with an amine odor.
Stability indicator/materials to avoid: yes
acids and oxidizing agents.
stability condition to avoid: prolonged storage over 90f.
hazardous decomposition products: nitrogen oxides, carbon monoxide and
or carbon dioxide.
Waste disposal methods: react this part b with part a and dispose of in
accordance with federal, state, and local regulations.
Ingred name: triphenyl phosphite
cas: 101-02-0
rtecs #: th1575000
ingred name: para-toluenesulfonamide resin
cas: 1338-51-8
ingred name: triethanolamine
cas: 102-71-6
rtecs #: kl9275000
acgih tlv: 5 mg/m3
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
ingred name: polyamide resins
cas: 63428-83-1
rtecs #: rf5250000
ingred name: alunimum silicate
cas: 12269-78-2
ingred name: black iron oxide
cas: 1317-38-0
rtecs #: gl7900000
acgih tlv: 5 mg/m3
ingred name: milled glass
cas: 65997-17-3
acgih tlv: 10 mg/m3
ingred name: silicone dioxide, amorphous
cas: 67762-90-7
acgih tlv: 10 mg/m3
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: acute: skin irritation and redness.Chronic: may cause
sensitization.
signs and symptions of overexposure: inhalation: vapors may cause nausea, and
may be irritating. Skin and eye contact: vapors can cause skin and eye
irritation upon repeated or prolonged contact. Redness of skin. skin
absorption: a know n sensitizer, may cause skin rash with prolonged or
repeated use. Ingestion: if ingested, can cause alimentary tract and stomach
discomfort.
medical cond aggravated by exposure: allergies, skin wounds and abrasions and
head colds.
first aid: eyes: immediately flush with plenty of water for at least 15
minutes. Get medical attention. Skin: wash with mild soap and water all
exposed surfaces. Remove contaminated clothing and launder before r euse.
inhalation: remove victim to fresh air. Give oxygen if breathing is
difficult. Call physician.
hcc: v5
vapor pres: see ing 3
spec gravity: 1+/-0.1(h*2o=1)
solubility in water: very slight
appearance and odor: pale yellow liquid with characteristic odor.
product id: 18005kb, mil-r-19907d liquid hardener part b
cage: 19092
company name: abbey color inc dba abbey products and bonded
street: 400 e tioga st
city: philadelphia pa
zipcode: 19134-1127
health emergency phone: 215-7399960
label required ind: y
date of label review: 05/31/2000
status code: a
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: warning
respiratory protection ind: yes
health hazard: moderate
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 19092
trans id no: 153278
product id: 18005kb, mil-r-19907d liquid hardener part b
msds prepared date: 07/01/1996
review date: 05/31/2000
mfn: 1
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 1
Hazard and precautions: acute: skin irritation and redness.Chronic: may cause
sensitization.
spill release procedures: contain spill and remove all sources of ignition.
scrape into containers. Wear protective clothing. Work in a well ventilated
area.
waste disposal methods: react this part b with part a and dispose according to
federal, state and local regulations.
handling and storage precautions: work in a well-ventilated area. Practice good
caution and hygiene to prevent eye and skin contact. Avoid breathing vapors.
store in a cool, dry place.
other precautions: keep containers tightly closed. Discard heavily contaminated
shoes, leather articles and clothing.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: (acute and chronic): a known
sensitizer which may cause skin rash with prolonged or repeated
contact and can cause irritation of the nose, throat and lungs.
explanation of carcinogenicity: no information found.
effects of overexposure: inhalation: may cause nausea aid can be
irritating to air passages upon prolonged exposure. Skin and eye
contact: may cause skin irritation with prolonged or repeated
contact. Prolonged exposure to va pors can cause eye irritation.
skin absorption health risks and symptoms of exposure: irritation
of skin. Redness and itching. Ingestion: ingestion health risks are
not usual. If ingested, can cause a bdominal discomfort.
medical cond aggravated by exposure: skin abrasions and head colds.
First aid: eyes: immediately flush with water for at least 15 minutes.
call a physician. Skin: wash with mild soap and water affected
exposed skin surfaces. Inhalation: remove victim to fresh air. Give
oxygen if breathing is dificult. Call a physician. Remove
contaminated clothing and launder before reuse.
Hcc: v5
boiling pt: b.P. Text: not determined
spec gravity: 1.1 to 1.2
solubility in water: very slight
appearance and odor: black paste with an amine odor.
Stability indicator/materials to avoid: yes
acids and oxidizing agents.
stability condition to avoid: stable
hazardous decomposition products: burning may produce nitrogen oxides,
carbon monoxide and/or carbon dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: react this part b with part a and dispose in
accordance with federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
cas: 68410-23-1
ingred name: aluminum silicate
cas: 12269-78-2
ingred name: black iron oxide
cas: 1317-61-9
osha pel: 10 ppm
acgih tlv: 5 mg/m3
ingred name: milled glass
cas: 65997-17-3
acgih tlv: 10 mg/m3
ingred name: silicon dioxide, amorphous
cas: 67762-90-7
osha pel: 20 mppcf
acgih tlv: 10 mg/ms
ingred name: triphenyl phosphite
cas: 101-02-0
rtecs #: th1575000
ingred name: para-toluenesulfonamide resin
cas: 1338-51-8
ingred name: triethanolamine
cas: 102-71-6
rtecs #: kl9275000
acgih tlv: 5 mg/m3
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000