NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A cutting tool, supported by a holder, and used for various machine operations, including boring, cut-off, planing, slotting, threading, and turning.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Interchangeable tools for handtools for turning of base metal
Interchangeable tools for hand tools or for machine-tools (pressing, stamping, punching, drilling, etc.), including dies for extruding metal
Wood, glass, plastic
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICU - Precious metal content is unknown
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
186620 - Tools, noi hand other than power
732 - Tools, hand and portable, electric
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $16.97 to $28.28.. | |
| Does NSN 3455-00-019-4328 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, and Department Of The Navy | |
| What is the NIIN of NSN 3455-00-019-4328? | |
| 000194328 or 00-019-4328 | |
| Does NSN 3455-00-019-4328 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 3455-00-019-4328? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| May 02, 1967 | |
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: short term exposure to grinding dust,
gases or dust may result in discomfort such as dizziness, nausea,
fever, dryness and/or irritation of nose, throat and eyes. Skin
sensitivity may also be noted. A cute exposure to dust may cause
pulmonary problems.
explanation of carcinogenicity: chromium(vi) is considered carcinogen
under ntp & iarc. Respiratory cancer from welding/grinding is
unconfirmed.
effects of overexposure: dizziness, nausea, fever, dryness and/or
irritation of nose, throat and eyes. Skin sensitivity may also be
noted. Watery eyes, headache, breathing difficulty, frequent
coughing and/or chest pains may occur from acute exposure.
medical cond aggravated by exposure: some workers may be affected by a
pre-existing condition or other occupational illness because of the
wide variation in individual susceptibilities.
First aid: in case of electrical shock, turn off power prior to removal
from exposure area and administration of first aid. Call for
medical aid. If not breathing, begin artificial respiration/oxygen.
eye: flush with water for 15 min and seek medical help. Skin: wash
with soap and water.
Hcc: n1
boiling pt: b.P. Text: 5198f,2870c
spec gravity: 9.5-15.5
solubility in water: insoluble
appearance and odor: dark grey metal, no odor
Stability indicator/materials to avoid: yes
strong acids and bases., strong oxidizing agents.
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: dispose i/a/w federal, state & local regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: tungsten carbide
cas: 12070-12-1
fraction by wt: 30-97%
other rec limits: none specified
acgih tlv: 5 mg/m3 as w
ingred name: cobalt (sara iii)
cas: 7440-48-4
rtecs #: gf8750000
fraction by wt: 2-30%
other rec limits: none specified
osha pel: 0.1 mg/m3;as co
acgih tlv: 0.05 mg/m3;dust 9293
ingred name: tantalum carbide
cas: 12070-06-3
fraction by wt: 0.1-56%
other rec limits: none specified
osha pel: 5 mg/m3 as ta
acgih tlv: 5 mg/m3 as ta
ingred name: chromium carbide
cas: 12012-35-0
fraction by wt: 0-10%
other rec limits: none specified
osha pel: 1 mg/m3 as cr(iii)
acgih tlv: 0.5 mg/m3 as cr(iii)
ingred name: chromium (sara iii)
cas: 7440-47-3
rtecs #: gb4200000
fraction by wt: 0-10%
other rec limits: none specified
osha pel: 1 mg/m3
acgih tlv: 0.5 mg/m3; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: short term exposure to grinding dust,
or gases may result in discomfort such as dizziness, nausea,
fever, dryness and/or irritation of nose, throat and eyes. Skin
sensitivity may also be noted. Acute exposure to dust may cause
pulmonary problems.
explanation of carcinogenicity: cr(vi),cd & ni are considered
carcinogens under ntp & iarc. Respiratory cancer from
welding/grinding is unconfirmed.
effects of overexposure: dizziness, nausea, fever, dryness and/or
irritation of nose, throat and eyes. Skin sensitivity may also be
noted. Watery eyes, headache, breathing difficulty, frequent
coughing and/or chest pains may occur from acute exposure.
medical cond aggravated by exposure: some workers may be affected by a
pre-existing condition or other occupational illness because of the
wide variation in individual susceptibilities.
First aid: in case of electrical shock, turn off power prior to removal
from exposure area and administration of first aid. Call for
medical aid. If not breathing, begin artificial respiration/oxygen.
eye: flush with water for 15 min and seek medical help. Skin: wash
with soap and water.
Hcc: n1
spec gravity: 9.52
appearance and odor: metallic rod, wire, strip, or powder.
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids and bases.
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: dispose i/a/w federal, state & local regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silver (sara iii)
cas: 7440-22-4
rtecs #: vw3500000
fraction by wt: 50%
other rec limits: none specified
osha pel: 0.01 mg/m3
acgih tlv: 0.1 mg/m3; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: copper (sara iii)
cas: 7440-50-8
rtecs #: gl5325000
fraction by wt: 15.5%
other rec limits: none specified
osha pel: 0.1mg/m3 fume/1 dust
acgih tlv: 0.2mg/m3 fume; 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: zinc (sara iii)
cas: 7440-66-6
rtecs #: zg8600000
fraction by wt: 15.5%
other rec limits: none specified
osha pel: 10 mg zno/m3
acgih tlv: 10 mg zno/m3; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: cadmium (sara iii)
cas: 7440-43-9
rtecs #: eu9800000
fraction by wt: 16%
other rec limits: none specified
osha pel: see 1910.1027
acgih tlv: 0.01 mg/m3 dust;9394
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: nickel (sara iii)
cas: 7440-02-0
rtecs #: qr5950000
fraction by wt: 3%
other rec limits: none specified
osha pel: 1 mg/m3
acgih tlv: 1 mg/m3; 9192