NSN 4710-00-059-8404

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

4710-00-059-8404, no name available.

NSN 4710-00-059-8404 Datasheet

(NSN) National Stock Number

4710-00-059-8404

(FSG) Federal Supply Group

47 - Pipe, Tubing, Hose, and Fittings

(FSC) Federal Supply Classification

4710 - Tube and Rigid Tubing Pipe

(NIIN) National Item Identification Number

00-059-8404

Requires Demilitarization

Yes

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

FPZ - San antonio air logistics center kelly afb, texas 78241-5000

Questions & Answers

1. What is the FSCG of the NSN 4710-00-059-8404?

   The FSCG of the NSN 4710-00-059-8404 is 4710

2. Does NSN 4710-00-059-8404 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 4710-00-059-8404 contain precious materials?

   Precious metal content is unknown

4. Does NSN 4710-00-059-8404 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.