NSN 5310-00-059-8800

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.480 inches nominal nut height, steel overall material, chamfered or washer faced bearing surface type, hexagon nut style, 0.562 inches nominal thread size.

NSN 5310-00-059-8800 Datasheet

(NSN) National Stock Number

5310-00-059-8800

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5310 - Nuts and Washers

(NIIN) National Item Identification Number

00-059-8800

Requires Demilitarization

Yes

(INC) Item Name Code

01857

Date

Thu, Jun 8, 1967

Bearing Surface Type

chamfered or washer faced

Material

steel overall

Nominal Thread Size

0.562 inches

Nut Height

0.480 inches nominal

Nut Style

hexagon

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series

unf

Width Across Flats

0.866 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0001857

Cross Reference

CAGE Codes

93232

Curtiss-Wright Electro-Mechanical Corporation Dba Curtiss Wright Engineered Pump Division Use Cage Code 0ubg9 for Cataloging

U.s./canadian manufacturers

81285

Moog Automotive Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

573 - Bolts or nuts (iron or steel),(less than 35 feet)

National Motor Freight Classification Item Number

093486

Questions & Answers

1. What is the FSCG of the NSN 5310-00-059-8800?

   The FSCG of the NSN 5310-00-059-8800 is 5310

2. Does NSN 5310-00-059-8800 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5310-00-059-8800 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5310-00-059-8800 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5310-00-059-8800 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Thu, Jun 8, 1967