Worldwide distributor of NSN parts and consumables located in the USA.
A size graded organic or mineral cutting or polishing agent of natural or artificial origin. Excludes sand, sandblast (silica sand); polishing abrasive, optical glass; pumice, technical; rottenstone; and rouge, abrasive.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Natural or artificial abrasives on a base other than fabric or paper
Natural or artificial abrasives on a base of materials, n.E.S. (other than woven textiles, paper or paperboard)
Mineral supplies-manufactured
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $121.50 to $202.50.. | |
Does NSN 5350-01-120-3546 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
No recorded entities for this stock number. | |
What is the NIIN of NSN 5350-01-120-3546? | |
011203546 or 01-120-3546 | |
Does NSN 5350-01-120-3546 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 5350-01-120-3546? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Oct 17, 1981 |
Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: some rcd of lung dmg due to inhal
finely div al oxide particles.Known as shavers disease,complicated
by inhal air w/ silica & oxides of iron.Al not regarded as indl
poison.Inhal al powder rptd as caus e of prelim fibrosis.Zr not an
important indl poison,death in rabbits caused by iv inj of 150
mg/kg.Avoid inhal sup data
explanation of carcinogenicity: n/a fp-n
First aid: eye contact: flush eyes with water for at least 15 minutes .If
irritation persists,consult a physician.Skin contact: wash with
soap and water to remove material.Inhalation: expose to fresh
air.Ing estion: n/a(mfr).Ingest: call md immediately
Hcc: n1
decomp temp: decomp text:
spec gravity: 1.9
ph:
solubility in water: neg
appearance and odor: grit;no odor
percent volatiles by volume:
corrosion rate:
Stability indicator/materials to avoid: yes
stability condition to avoid: an adequate exhaust system is required to
avoid the toxic or noxious effect of dust & fumes which may be (see
sup data)
Waste disposal methods: consult local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt:
other rec limits:
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: zirconium oxide
cas: 7440-67-7
rtecs #: zh7070000
fraction by wt:
other rec limits:
osha pel: 5 mg/m3/10 stel (zr)
acgih tlv: 5 mg/m3/10 stel (zr)
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits:
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica, crystalline - fused
cas: 60676-86-0
rtecs #: vv7328000
fraction by wt:
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: aluminum oxide: haz by inhal,
skin & eye cont. Inhal may cause benign pneumoconiosos. Skin & eye
cont may cause irrit. Target organs: lungs, eyes, skin. Zirconium
oxide: haz by inhal & skin con t. Inhal may cause irrit to resp
tract.Skin cont may cause irrit & skin granulomas. Target organs:
(efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: hlth haz: resp tract, skin. Titanium dioxide:
haz by inhal, eye & skin cont as a nuisance particulate. Inhal may
cause irrit to upper resp tract. Dust may be a mod irrit to muc
memb. Eye cont may caus e irrit. Skin cont may have a defattingeft,
causing drying & irrit. Target organs: upper resp tract, eyes, (sup
dat)
medical cond aggravated by exposure: respiratory conditions, dermatitis.
First aid: eyes: flush with water for at least 15-20 minutes while
holding eyelid open. If irritation persists, consult md. Skin: wash
affected area with soap and water. If irritation/dermatitis
persists, consul t md. Inhalation: expose to fresh air. Consult md
if irritation or respiratory distress persists. Ingestion: consult
md.
Spec gravity: 1.9 (h*2o=1)
solubility in water: negative
appearance and odor: grit, no odor
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: ozone & nitric acid are formed by
plasma flame (similar to welding fumes). This action is independent
of metal powder.
Waste disposal methods: dispose of in accordance with applicable local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aluminum oxide (2: 3); (aluminum oxide) (sara 313)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt: 94%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: zirconium; (zirconium oxide)
cas: 7440-67-7
rtecs #: zh7070000
fraction by wt: 3%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 2%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: silica gel; (silicon dioxide)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 1%
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: prot gloves: during the plasma spray process. Rubber or
other appropriate gloves may be worn as necessary during (ing 6)
rtecs #: 9999999zz
ingred name: ing 5: other phases of product handling to avoid excessive
skin contact.
rtecs #: 9999999zz
ingred name: eye prot: rec for the process indicated. Combustion
spraying shade #5, plasma spraying up to 40 kw shade #9, (ing 8)
rtecs #: 9999999zz
ingred name: ing 7: 40-60 kw shade #10, & greater than 60 kw shade #11.
goggles may be appropriate during other phases of (ing 9)
rtecs #: 9999999zz
ingred name: ing 8: product handling. Ansi approved chemical workers
goggles .
rtecs #: 9999999zz
ingred name: other prot equip: noise levels (refer to the approp
regulatory guidelines). An aluminized apron is to be worn (ing 11)
rtecs #: 9999999zz
ingred name: ing 10: during the plasma spray process. Other appropriate
protective clothing may be worn as necessary during (ing 12)
rtecs #: 9999999zz
ingred name: ing 11: product handling to avoid excessive contact with
the skin.
rtecs #: 9999999zz