Worldwide distributor of NSN parts and consumables located in the USA.
A size graded organic or mineral cutting or polishing agent of natural or artificial origin. Excludes sand, sandblast (silica sand); polishing abrasive, optical glass; pumice, technical; rottenstone; and rouge, abrasive.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Natural or artificial abrasives on a base other than fabric or paper
Natural or artificial abrasives on a base of materials, n.E.S. (other than woven textiles, paper or paperboard)
Mineral supplies-manufactured
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $1,614.82 to $2,691.36.. | |
Does NSN 5350-01-326-9264 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Air Force, Department Of The Navy, General Services Administration, Brazil, and Portugal | |
What is the NIIN of NSN 5350-01-326-9264? | |
013269264 or 01-326-9264 | |
Does NSN 5350-01-326-9264 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 5350-01-326-9264? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Oct 04, 1990 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eyes: irritation. Inhalation:
respiratory tract irritation & breathing difficulty.
explanation of carcinogenicity: none
effects of overexposure: skin/eyes: irritation. Inhalation: respiratory
tract irritation & breathing difficulty.
First aid: skin: wash thoroughly w/soap & water. Eyes: flush w/water for
15 mins. Inhalation: remove to fresh air. Obtain medical attention
in all cases.
Spec gravity: 1.19
ph: 4-8
solubility in water: insoluble
appearance and odor: granular, no odor.
Stability indicator/materials to avoid: yes
stability condition to avoid: excessive heat, ignition sources >570f.
hazardous decomposition products: co, co2, smoke, & methyl methacrylate
monomer.
Waste disposal methods: dispose of in a sanitary landfill in accordance
w/local, state, & federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polymethylmethacrylate, plexiglas
cas: 9011-14-7
rtecs #: tr0400000
fraction by wt: 99.5%
ingred name: stearamidopropyldimethyl-beta-hydroxyethylammonium nitrate
(quaternary ammonium compound)
cas: 2764-13-8
fraction by wt:
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: monomer vapors from heated
product can irritate the eyes. Skin: very low order of toxicity.
inhalation: monomer vapors from heated product can cause
irritation, nausea, headache, and dizziness. ingestion: very low
order of toxicity.
effects of overexposure: eyes: irritation. Skin: very low order of
toxicity. Inhalation: irritation, nausea, headache, dizziness.
ingestion: very low order of toxicity.
medical cond aggravated by exposure: none known.
First aid: eyes: flush with large amounts of water. If irritation
persists, get medical attention. Skin: wash area with soap and
water. Inhalation: move to fresh air. Ingestion: very low order of
toxicity. If ad verse symptoms develop, get medical attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 270f,132c
spec gravity: 1.15
solubility in water: none
appearance and odor: clear white granules. Slight methyl methacrylate
odor.
Stability indicator/materials to avoid: yes
strong acids, bases, oxidizing agents.
stability condition to avoid: temperatures over 260c (500f).
hazardous decomposition products: acrylic monomers.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acrylate polymer, non hazardous
cas: 25852-37-3
fraction by wt: 100%
other rec limits: none recommended
ingred name: methyl methacrylate (sara iii)
cas: 80-62-6
rtecs #: oz5075000
fraction by wt: trace
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm; 9394
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs