Worldwide distributor of NSN parts and consumables located in the USA.
Liquid synthetic rubber which is mixed with other material such as aggregate, terra cotta, and the like, to make a mixture capable of being troweled to form a latex mastic deck covering, or underlay for a latex mastic deck covering.
The last inventory check on this NSN was done on 12/17/2020. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Other latex, nesoi
Synthetic rubber and factice derived from oils, n.E.S., in primary forms, etc.
Synthetic rubber-primary
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
171720 - Rubber latex liquid
660 - Cement, construction
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
S - 60.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $218.54 to $364.23.. | |
Does NSN 5610-00-618-0258 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, General Services Administration, and Greece | |
What is the NIIN of NSN 5610-00-618-0258? | |
006180258 or 00-618-0258 | |
Does NSN 5610-00-618-0258 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 5610-00-618-0258? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Effects of overexposure: eye: minor to slight irritation. Ingest: low
sngle dosage toxicity. Prlngd skin cntct: mld irrit/burn.
First aid: eye: immediately flush w/water at least 15 min. Call md
ingestion: induce vomiting if large amounts swallowed. Treat
symptonatically. Skin: flush thorouoghly w/water. Callmd if
irritation persists.
Hcc: n1
boiling pt: b.P. Text: 212f, 100c
spec gravity: 0.96
solubility in water: complete
appearance and odor: milky white liquid emulsion w/semi-sweet odor.
percent volatiles by volume: 65
Stability indicator/materials to avoid: yes
addtn of unspecified chemicals may cause coagulation.
stability condition to avoid: not reactive but may coagulate if frozen.
hazardous decomposition products: smoke, co, co*2.
Waste disposal methods: dispose as "chemical waste" in accordance
w/local, state, & federa regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: stabilized synthetic rubber emulsions in aqueous phase.
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none established
effects of overexposure: slight alkali dermatitis in sensitive people.
medical cond aggravated by exposure: none
First aid: skin contact: soap and water flush. Eye contact: flush with
water 15 minutes..
Hcc: b3
boiling pt: b.P. Text: 212f,100c
melt/freeze pt: m.P/f.P text: 32.0f,0.0c
vapor pres: 17.5
spec gravity: 1
ph: 8.5
viscosity: 100 ccs
evaporation rate & reference:
solubility in water: miscible
appearance and odor: light milky color - mild odor.
percent volatiles by volume: 65
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: in accordance with federal, state and local
regulations. Mix with underlay-l filler, cement or sawdust, allow
to cure or dry then dispose.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene polymer with 1,3-butadiene
cas: 9003-55-8
rtecs #: wl6478000
other rec limits: none recommended
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: inhalation may cause inflammation of
lining tissue of the nose. Ksin contact may cause slight alkali
dermatitis in sensitive people. Cement dust can irritate eyes and
upper respiratory system.
explanation of carcinogenicity: there is limited evidence of
carcinogenicity to humans.
effects of overexposure: see above.
medical cond aggravated by exposure: see above.
First aid: eyes-irrigate with water, consult physician. Skin-wash with
soap and water. Ingestion-consult physician immediately, give
water, induce vomiting.
Hcc: n1
spec gravity: 2.8
solubility in water: 0.1-1.0%
appearance and odor: greenish gray powder & granules - no odor.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: in accordance with federal, state and local
regulations. Mix with underlay-l liquid or water, allow to cure for
24 hours then dispose.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: portland cement
cas: 65997-15-1
rtecs #: vv8770000
fraction by wt: 17%
other rec limits: none recommended
osha pel: 50 mppcf; z-3
acgih tlv: 10 mg/m3 tdust; 9394
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 83%
other rec limits: none recommended
osha pel: 10 mg/m3 rdust; z-3
acgih tlv: 0.1 mg/m3 rdust;9394
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause eye and skin
irritation.
explanation of carcinogenicity: not relevant.
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhal: move subject to fresh air. Eyes: flush with water for @
least 15 minutes & call phys. Skin: wash affected areas with soap
and water - remove contaminated clothing. Ingest: induce vomiting
and call phys at once.
Boiling pt: b.P. Text: 212f,100c
vapor pres: as water
vapor density: as water
spec gravity: supp data
evaporation rate & reference: as water
solubility in water: dispersible
appearance and odor: milky white liquid emulsion-with slight styrene
odor.
percent volatiles by volume: 70
Stability indicator/materials to avoid: yes
not applicable.
stability condition to avoid: non-reactive, may coagulate if frozen at
32f.
hazardous decomposition products: not applicable.
Waste disposal methods: may be incinerated or disposed of in sanitary
landfill in accordance with procedures used with latex products and
with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: tlv = 0.3 mg/m3 respirable dust
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: drying, alkali burns,
inflammation. Silicosis
First aid: inhalation: get fresh air. Eye: irrigate w/water. Get medical
aid. Skin: wash w/soap & water. Ingestion: rush to get medical aid.
Boiling pt: b.P. Text: na
vapor pres: na
vapor density: na
spec gravity: na
evaporation rate & reference: na
solubility in water: slight
appearance and odor: gray powder, odorless
percent volatiles by volume: na
Stability indicator/materials to avoid: yes
water
hazardous decomposition products: na
Waste disposal methods: suitable for landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: there are no hazardous ingredients listed for this product.
fraction by wt: na
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant
Ld50 lc50 mixture: oral rat ld50 >50g/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal: headache, nausea,
nose/throat/lung irritation. Skin: iritation. Eye: irritation.
First aid: inhal: move to fresh air. Eye: flush w/large amounts water
for >15 minutes, call dr. Skin: wash w/soap & water
Boiling pt: b.P. Text: 212f,100c
vapor pres: 17 @ 68f
vapor density:
spec gravity: 1-1.2
ph: 9.5-10
viscosity: 100cps
evaporation rate & reference:
solubility in water: dilutable
appearance and odor: milky white liquid, mild acrylic odor
percent volatiles by volume: 52-54
Stability indicator/materials to avoid: yes
nk
stability condition to avoid: temps >350f
Waste disposal methods: flush clear supernant liquid to chem sewer.
landfill/incinerate solids according to local/state/federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acrylic polymer
cas: 25068-63-7
fraction by wt: 36.0%
other rec limits: none recommended
ingred name: defoamer
fraction by wt: 0.5%
other rec limits: none recommended
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt: 63.0%
other rec limits: none recommended
ingred name: formaldehyde (sara 302/313) (cercla)
cas: 50-00-0
rtecs #: lp8925000
fraction by wt: 0.05%
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause eye and skin
irritation. Chronic: not established.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: not established.
First aid: inhal: move subject to fresh air. Eyes: flush w/water for at
least 15 minutes & call md. Skin: wash affected areas w/soap &
water. Remove contaminated clothing. Ingest: induce vomiting & call
md at once.
Boiling pt: b.P. Text: 212f,100c
vapor pres: as water
vapor density: as water
spec gravity: supp data
evaporation rate & reference: as water
solubility in water: dispersible
appearance and odor: milky white liquid emulsion w/slight styrene odor.
percent volatiles by volume: 70
Stability indicator/materials to avoid: yes
stability condition to avoid: non-reactive, may coagulate if frozen at
32f.
Waste disposal methods: may be incinerated or disposed of in sanitary
landfill i/a/w procedures used w/latex products & w/local, state &
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carboxylated sbr latex
cas: 30174-67-5
osha pel: n/k
acgih tlv: n/k