NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $63.67 to $106.11.. | |
| Does NSN 5610-01-095-9618 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Navy, and General Services Administration | |
| What is the NIIN of NSN 5610-01-095-9618? | |
| 010959618 or 01-095-9618 | |
| Does NSN 5610-01-095-9618 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 5610-01-095-9618? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jun 10, 1980 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: severe
irritation/red/tear/blurred vision. Skin: moderate
irrit/defatting/dermatitis. Inhalation: irritation to
nose/throat/dizziness/weakness/nausea/headache/unconscious/asphyxia
tion. Ingestion: aspiration hazard.
medical cond aggravated by exposure: cns disease, skin disorder, chronic
respiratory disease.
First aid: eye: flush w/large amts water >15 minutes. Get medical aid.
skin: remove contaminated clothes. Thoroughly wash w/soap & water.
get medical aid. Inhalation: move to fresh air. If trouble
breathing, oxy gen, stopped, artificial resp. Keep warm/quiet. Get
med aid. Ingestion: don't induce vomiting. Take to hospital immed.
get medical aid.
Boiling pt: b.P. Text: 300 to 390f
melt/freeze pt: m.P/f.P text: na
vapor pres: 6.0
vapor density: 3.9
spec gravity: 1.07-1.11
ph: na
viscosity: >20000 cps
evaporation rate & reference: slower than ether
solubility in water: insoluble
percent volatiles by volume:
Stability indicator/materials to avoid: yes
stong oxidants.
hazardous decomposition products: toxic materials, carbon dioxide,
carbon monoxide, nitrogen oxides.
Waste disposal methods: according to applicable governmental
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: asphalt (petroleum)
cas: 8052-42-4
rtecs #: ci9900000
fraction by wt:
other rec limits: none recommended
acgih tlv: 5 mg/m3
ingred name: petroleum solvents
cas: 64742-48-9
fraction by wt: 20.0%
other rec limits: none recommended
acgih tlv: 100 ppm
ingred name: asbestos (friable) (sara 313) (cercla)
cas: 1332-21-4
rtecs #: ci6425000
fraction by wt:
other rec limits: none recommended
acgih tlv: 1.2 fibers >5 um/cc
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: inorganic filler
fraction by wt:
other rec limits: none recommended
acgih tlv: 10 mg/m3
Routes of entry: inhalation: yes skin: yes ingestion: yes
effects of overexposure: eye contact: petroleum solvents and asphalt can
cause severe irritation, redness, tearing and blurred vision. Skin:
prolonged contact with petroleum solvents and asphalt components
moderate irritation , defatting, dermatitis. Inhalation: excessive
inhalation of petroleum solvents can cause irritation of nose and
throat, dizziness, weakness, fatigue, nausea, headache, possible
unconsciousness and ev en asphyziation. ingestion: aspiration
hazard.
medical cond aggravated by exposure: persons with pre-existing central
nervous system diseases, skin disorders, or chronic respiratory
disease should avoid exposure to this product.
First aid: eye contact: flush with large amounts of water for at least
15 minutes. Get medical attention. Skin: remove contaminated
clothing/shoes thoroughly wash exposed area with soap and water.
inhalation: re move individual to fresh air. Ingestion: do not
induce vomiting-transport to hospital immediately. Get medical
attention. Note to physician- perform gastric lavage in accordance
with procedures for in gestion of petroleum products.
Boiling pt: >148.9c, 300.F
b.P. Text: 300-390f
vapor pres: 6mm hg 106f
vapor density: 3.9
spec gravity: 1.07-1.11
viscosity: 500,000 - 1,500,000 cps
evaporation rate & reference: slower than ether
solubility in water: insoluble
percent volatiles by volume: < 25%
Stability indicator/materials to avoid: yes
strong oxidizers such as liquid chlorine, concentrated oxygen, sodium
hypochlorite or calcium hypochlorite.
stability condition to avoid: avoid heat or open flame.
hazardous decomposition products: may form toxic materials; carbon
dioxide and carbon monoxide and nitrogen oxides.
Waste disposal methods: dispose of in an environmentally safe manner and
in accordance with governmental regulations. ?Empty? Containers
retain residue (liquid and/or vapor) and can be dangerous. Do not
pressurize, cut, weld , braze, solder, drill, or expose such
containers to heat, flames, sparks or other sources of igniti on,
they may explode and cause injury or death. Do
Ingred name: petroleum asphalt
cas: 8052-42-4
rtecs #: ci9900000
< wt: 45.
acgih tlv: 5 mg/m3
ingred name: stoddard solvent
cas: 8052-41-3
rtecs #: wj8925000
< wt: 20.
osha pel: 2900 mg/m3;500 ppm
acgih tlv: 525 mg/m3;100 ppm
ingred name: cellulose fiber
cas: 9004-34-6
code: f
rtecs #: fj5691460
< wt: 10.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: mineral filler
< wt: 35.