Home » FSC Catalog » Resistors » 5905-00-004-5832

Variable Nonwire Wound Resistor

SKU: 5905000045832 | Model: RJ26CP104
NSN 5905-00-004-5832 NSN 5905-00-004-5832
Description:

1 section quantity, rectangular body style, 0.172" terminal length, 0.075" shaft diameter, 0.050" shaft length, 0.250" body length

Specifications from the Manufacturer

Section Quantity:
1
Body Style:
Rectangular
Reliability Indicator:
Not established
Terminal Length:
0.172 inches minimum
Shaft Diameter:
0.075 inches nominal
Shaft Length:
0.050 inches maximum
Body Length:
0.250 inches nominal
Body Width:
0.172 inches minimum
Body Height:
0.250 inches nominal
Shaft Style:
Round, slotted
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
3600.0 minimum and 9000.0 maximum
Center To Center Distance Between Terminals:
0.200 inches nominal
Terminal Location:
Left adjacent side two rows
Mounting Method:
Terminal
Center To Center Distance Between Terminal Rows:
0.100 inches nominal
Electrical Resistance Per Section:
100.0 kilohms single section
Rotary Actuator Travel In Angular Deg:
3600.0 minimum and 9000.0 maximum
Center To Center Distance Between Center Terminal And Outside Terminal:
0.100 inches nominal
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power:
150.0 single section
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-250.0/+250.0 single section
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-250.0 to 250.0 single section
Power Dissipation Rating Per Section In Watts:
0.25 free air single section
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
Resistance Tolerance Per Section In Percent:
-10.0 to 10.0 single section
Actuator Travel Control Feature:
Clutch
Ambient Temp In Deg Celsius Per Section At Full Rated Power:
85.0 single section
Standard Taper Curve Per Section:
A single section
Test Data Document:
81349-mil-r-22097 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Terminal Type And Quantity:
3 pin
Specification/standard Data:
81349-mil-r-22097/3 government specification

Pricing and Availability

Request a Quote

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Quantity:
Company:
Name:
Email:
Phone:

Order With Confidence

Certified quality parts supplier
  • MSDS Hazmat Certified
  • certified Committed to quality with 100% product inspection
  • on time delivery icon On-time delivery
Recently Updated in Resistors
NSN 5905-00-006-6951 Fixed Wire Wound Induct Resistor

-20.0/+20.0 temp coefficient of resistance in ppm per degrees celsius, 110.000 ohms electrical resistance, -1.000 to 1.000 resistance tolerance in percent

NSN 5905-00-006-6950 Fixed Wire Wound Induct Resistor

-90.0 to 90.0 temp coefficient of resistance in ppm per degrees celsius, 0.205 ohms electrical resistance, -1.000 to 1.000 resistance tolerance in percent

NSN 5905-00-006-6947 Fixed Wire Wound Induct Resistor

-50.0 to 50.0 temp coefficient of resistance in ppm per degrees celsius, 1.210 ohms electrical resistance, -1.000 to 1.000 resistance tolerance in percent

NSN 5905-00-006-6945 Film Fixed Resistor

-25.0/+25.0 temp coefficient of resistance in ppm per degrees celsius, 348.000 ohms electrical resistance, -1.000 to 1.000 resistance tolerance in percent

NSN 5905-00-004-5832 Datasheet

Supply Class:

5905 RESISTORS

Cross Reference:

  • RJ26CP104
  • MILR22097-5

Cage Codes:

  • Military Specifications (CAGE 81349)

Replaced or Cancelled:

5905-00-004-5832 is not a replacement of any national stock number and has not been cancelled or replaced itself.

Identification:

NIIN: 000045832
NSN: 5905000045832
DEMIL Code: A
DEMIL Code Meaning: Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations.
ADPE:
CRITL: X
ENAC:
ESD:
HMIC: N
PMIC: U

Freight Codes:

NMF Desc: Reostats/parts Noi
NMFC: 062960
UFC: 35140
LTL: 77.5
LCL:
WCC: Electrical appliances, small
TCC: No special type of cargo code applicable
SHC: Other or no special handling required (sh)
ADC: Shipment is not a consolidation and does not exceed 84 inches in any dimension.
ACC: Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ASH: No special handling required.

Reference Drawing:

[drawing of 5905-00-004-5832]

Schedule B & Trade:

8533400080 (NAICS 334416)
Variable resistors, including potentiometers, nesoi
SITC:
77235

Variable electrical resistors (including reostats and potentiometers), n.e.s.

End Use:
20005

Electric apparatus

Questions & Answers:

What are the historical prices recorded for this stock number?
No pre-dated pricing for this NSN could be found.
Does NSN 5905-00-004-5832 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
No recorded entities for this stock number.
How is national stock number 5905-00-004-5832 defined?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
What is the NIIN of NSN 5905-00-004-5832?
000045832 or 00-004-5832
Does this item require Demilitarization?
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9).
Is NSN 5905000045832 ITAR controlled?
No. This item is not ITAR Controlled.
What is the most recent solicitation for NSN 5905000045832?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jun 07, 1972