NSN 5930-00-008-2639

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s suppressor, ignition interference. See also resistor (1), fixed, wire wound, noninductive.

115.0 ac at sea level contact voltage rating in volts, 100.0 milliamperes resistive load ac at sea level contact load current rating, 200.0 milliamperes resistive load and 20.0 milliamperes inductive load dc at sea level contact load current rating, breaks before makes each section rear contact switching action, 28.0 dc at sea level contact voltage rating in volts.

NSN 5930-00-008-2639 Datasheet

(NSN) National Stock Number

5930-00-008-2639

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-008-2639

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Jul 16, 1972

Schedule B Code

8536509020

Switch Actuator Positioning Increment

15 degrees single actuator

Contact Load Current Rating

100 milliamperes resistive load ac at sea level

Contact Switching Action

Breaks before makes each section rear

Terminal Type

Tab, solder lug

Shaft Type

Round, flatted single actuator

Switch Actuator Indexing Position Quantity

24 single actuator

Rotor Through Connection Quantity

1 each section

Shaft Flat/slot Angular Location

90 degrees from nonturn device single actuator

Contact Voltage Rating In Volts

28 dc at sea level

Contact Voltage Rating In Volts

115 ac at sea level

Nominal Thread Size

0.375 inches single mounting facility

Mounting Method

Threaded bushing single mounting facility

Throw Quantity

24 each section rear

Pole Quantity

1 each section front

Switch Contact Basic Design

Nonpile-up symmetrical

Operating Temp Range

-65/+85 degrees celsius

Nonturn Device Type

Pin at 3:00 o'clock

Individual Section Quantity

7

Nonturn Device Radius

0.531 inches at 3:00 o'clock

Shaft Length

0.929 inches single actuator

Shaft Diameter

0.247 inches minimum single actuator and 0.251 inches maximum single actuator

Flat Height

0.211 inches minimum single actuator and 0.221 inches maximum single actuator

First Flat Length

0.428 inches minimum single actuator and 0.448 inches maximum single actuator

Overall Width

1.609 inches maximum

Thread Length

0.344 inches minimum single mounting facility and 0.391 inches maximum single mounting facility

Overall Length

3.663 inches maximum

Overall Height

1.828 inches maximum

Thread Class

2a single mounting facility

Contact Load Current Rating

200 milliamperes resistive load dc at sea level and 20.0 milliamperes inductive load dc at sea level

Style Designator

Circular wafer, bushing mount

Test Data Document

81349-mils3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type da

Thread Series Designator

Unef single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

57057

Navcom Defense Electronics, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-008-2639?

   The FSCG of the NSN 5930-00-008-2639 is 5930

2. Does the NSN 5930-00-008-2639 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-008-2639 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-008-2639 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-008-2639 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-008-2639 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Sun, Jul 16, 1972