NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A collection of items used to repair/replace electro-optic terminations/devices of a fiber optic system or subsystem.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Ceramic articles nesoi
Ceramic articles, n.E.S.
Glassware, chinaware
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
057770 - Cable lightguide/wave glass fibre
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,179.64 to $1,966.07.. | |
| Does NSN 6080-01-358-9686 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, Poland, Australia, and Turkey | |
| What is the NIIN of NSN 6080-01-358-9686? | |
| 013589686 or 01-358-9686 | |
| Does NSN 6080-01-358-9686 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6080-01-358-9686? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| May 25, 1992 | |
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhale-irritation of upper
respiratory tract. Skin- severe irritation, burns. Eye-severe
irritation, corneal injury, vision impairment/blindness. Ingest-gi
tract irritation & burns to mouth & st omach. Chronic: skin
sensitization, ulceration. Target organs: not listed.
explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: ingest: nausea, vomiting & diarrhea,
inhaltion: coughing. Eye and skin: severe irritation, burns, redness,
itching, blurry eyes.
medical cond aggravated by exposure: may aggaravate preexisting eye and
skin disorders.
First aid: skin: remove contaminated clothing. Wash with soap and water.
get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.
eye: i mmediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. If unconscious drink a
glass of water.
Hcc: b2
solubility in water: see each part of kit
appearance and odor: see each part of kit
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong alkalis and strong acids.
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: oxides of phosphorus, nitrogen and
carbon.
Waste disposal methods: dispose in accordance with all applicable local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: see pni: a & b for nsn 8040-01-421-3510, cage: 1k705.
other rec limits: none recommended
ld50 lc50 mixture: oral ld50 (rat) is 2050 mg/kg.
route of entry inds - inhalation: no
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: irritating to skin and eyes. Repeated contact may cause
allergic skin reactions in sensitive individuals. Contact with product at
elevated temperatures may cause thermal burns.
explanation of carcinogenicity: none
signs and symptions of overexposure: eyes: irritation. Skin: irritation,
allergic skin reactions, burns.
medical cond aggravated by exposure: may aggravate preexisting skin and eye
disorders. Preexisting skin or lung disorders may increase the chance of
developing increased allergy symptoms from exposure to this product.
first aid: eyes: immediately flush with large amounts of water. Get medical
attention. Skin: remove contaminated clothing. Flush skin area with large
amounts of water. If irriation persists, get medical attentio n. Inhalation:
move to fresh air. If notbreathing, give cpr. If breathing difficult,give
oxygen. Get medical attention. Ingestion: do not induce vomiting.Drink a
glass of water.Get medical attention.
hcc: b2
boiling point: =140.C, 284.F
vapor pres: 2 mm hg
vapor density: 3.8
spec gravity: 1.14
evaporation rate & reference: >1
appearance and odor: milky white paste with a pleasant odor.
corrosion rate: unknown
product id: 105-501-415,epoxy resin part a for consumable kit,resin
cage: 05yc5
company name: lucent technologies
street: 600 mountain ave
city: murray hill nj
zipcode: 07974
health emergency phone: 908-582-3700,800-424-9300(chemtrec)
label required ind: y
date of label review: 03/10/1998
status code: c
label date: 03/10/1998
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: moderate
=======================================================
responsible party cage: 05yc5
trans id no: 129075
product id: 105-501-415,epoxy resin part a for consumable kit,resin
msds prepared date: 01/28/1998
review date: 03/09/1998
mfn: 1
net unit weight: 90 gms/ui
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: ea
container qty: 0
type of container: package
additional data: each kit, 105-501-415, contains 15 packages. Each package
contains 6 gms of part a and 2 gms of part b. Therefore, each kit contains a
total of 90 gms of part a and 30 gms of part b.
Hazard and precautions: irritating to skin and eyes. Repeated contact may cause
allergic skin reactions. Contact with product at elevated temperatures may
cause thermal burns. Store in a cool dry place. Use with adequate ven
tilation. Avoid contact with eyes, skin, and clothing. First aid: eyes: flush
with water. Get medical attention. Skin: remove contaminated clothing. Flush
skin area with water. If irriation persists, get medical attention.
inhalation: move to fresh air. If not breathing, give cpr. If breathing
difficult, give oxygen. Get medical attention. Ingestion: do not induce
vomiting. Drink a glass of water. get medical attention. Target organs:
eyes, skin.
spill release procedures: scrape up and transfer to metal container for
disposal. Use a rag or paper towel with detergent to wipe and clean of
remaining residue.
neutralizing agent: none specified by manufacturer.
waste disposal methods: dispose of waste in accordance with local, state and
federal regulations.
handling and storage precautions: store in a cool dry place. Use only with
adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid
breathing vapor or mist.
other precautions: wear appropriate personnal protection when handling. Wash
after handling.
ld50 lc50 mixture: oral ld50 (rat) is 2500 mg/kg
route of entry inds - inhalation: no
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eyes: severe irritation, pain, corneal injury. May cause
permanent impairment of vision and blindness. Skin: severe skin burns.
repeated contact may cause allergic reactions. Inhalation: irritation to
upper respiratory tract, respiratory sensitization. Ingestion: gi irritation
or ulceration, mouth and throat burns.
explanation of carcinogenicity: none
signs and symptions of overexposure: eyes: irritation, pain, corneal injury,
permanent impairment of vision, blindness. Skin: burns, allergic reactions.
inhalation: irritation, respiratory sensitization. Ingestion: gi tract
irritation a nd ulceration, mouth and throat burns.
medical cond aggravated by exposure: preexisting skin and eye disorders or skin
and lung allergies may be aggravated.
first aid: eyes: flush with large amounts of water. Get medical attention.
skin: remove contaminated clothing. Flush skin area with large amounts of
water. If irritation persists, get medical attention. Inhalati on: move to
fresh air. If not breathing,give cpr. If breathing is difficult give oxygen.
get medical attention. Ingestion: do not induce vomiting. Drink a glass of
water. Get medical attention.
hcc: b2
boiling point: =260.C, 500.F
vapor pres: <.01mm hg
vapor density: 5
spec gravity: 0.97
solubility in water: 20%
appearance and odor: amber liquid with slight ammonia-like odor.
percent volatiles by volume: 0
corrosion rate: unknown
product id: 105-501-415,epoxy resin part b for consumable kit,hardener
cage: 05yc5
company name: lucent technologies
street: 600 mountain ave
city: murray hill nj
zipcode: 07974
health emergency phone: 908-582-3700,800-424-9300(chemtrec)
label required ind: y
date of label review: 03/10/1998
status code: c
label date: 03/10/1998
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: danger
respiratory protection ind: yes
health hazard: severe
contact hazard: severe
fire hazard: moderate
=======================================================
responsible party cage: 05yc5
trans id no: 129076
product id: 105-501-415,epoxy resin part b for consumable kit,hardener
msds prepared date: 01/28/1998
review date: 03/10/1998
mfn: 2
net unit weight: 30 gms/ui
multiple kit number: 0
review ind: y
unit of issue: ea
container qty: 0
type of container: package
additional data: each kit, 105-601-415, contains 15 packages. Each package
contains 6 gms of part a and 2 gms of part b. Therefore, each kit contains a
total of 90 gms of part a and 30 gms of part b.
Hazard and precautions: contact may cause eye pain, corneal injury, permanent
impairment of vision, blindness, skin burns, irritation to upper respiratory
tract, respiratory sensitization. Swallowing may cause gi irritation,
ulceration,mouth,throat burns. Store incool dry place. Use with adequate
ventilation. First aid: eyes: flush with water. Get medical attention. Skin:
remove contaminated clothing. Flush skin area with water. Get medical
attention. Inhalation: move to fresh air. Support breathing as necessary. Get
medical attention. Ingestion: do not induce vomiting. Drink glass of water.
get medical attention. Tar get organs: eyes,skin,respiratory tract,gi tract.
spill release procedures: scrap up and transfer to metal container for
disposal. Use a rag or paper towel with detergent to wipe and clean off
remaining residue.
neutralizing agent: none specified by manufacturer.
waste disposal methods: dispose of in accordance with local, state and federal
regulations.
handling and storage precautions: store in a cool dry place. Use only with
adequate ventilation. Avoid breathing vapor or mist. Avoid contact with eyes,
skin, clothing.
other precautions: wear appropriate personal protection when handling. Wash
thoroughly after handling.
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: irritating to skin and eyes. Chronic
exposure may cause skin sensitization.
explanation of carcinogenicity: none
effects of overexposure: irritating to skin and eyes. Chronic exposure
may cause skin sensitization.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with large amounts of water. Get medical
attention. Skin: remove contaminated clothing. Flush skin with
large amounts of water and wash with soap and water, hand cleaner,
rubbing alcohol. don't use other solvents to remove material from
skin. If irritation persist, get medical attention. Inhalation:
move to fresh air. Get medical attention, if needed. Ingestion: get
medical attention.
Hcc: b2
boiling pt: b.P. Text: 284f,140c
vapor pres:
vapor density:
spec gravity: 1.15
solubility in water:
appearance and odor: translucent, liquid with sweet pleasant odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis acids or mineral acids.
stability condition to avoid: none
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen, aldehydes, organic acids, and undetermined
organics.
conditions to avoid polymerization: avoid mixing resin and curing agent
in batches >than 1 lb total.Don't heat material unless curing
surfaces to be bonded.
Waste disposal methods: dispose of in accordance with federal, state,
and local regulations. Appropriate disposal methods may include
landfill or incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: n-butyl glycidyl ether
cas: 2426-08-6
rtecs #: tx4200000
other rec limits: 25 ppm
osha pel: 25 ppm
acgih tlv: 25 ppm
ingred name: amorphous silica gel 96-1
cas: 7631-86-9
other rec limits: tlv 10 mg/m3
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritating. Skin: irritating.
chronic exposure may cause skin sensitization.
explanation of carcinogenicity: none
effects of overexposure: eyes: irritation. Skin irritation, skin
sesitization.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with large amounts of water. If adverse symptoms
develop, get medical attention. Skin: remove contaminated clothing.
flush skin with water, then wash with soap and water. Do not use
other solvents to remove material from skin. If irritation
persists, get medical attention. Inhalation: move to fresh air. If
adverse symptoms develop, get medical attention.Ingestion: get
medical attention.
Hcc: b2
boiling pt: b.P. Text: 531f,277c
vapor pres:
vapor density: >1
spec gravity: 0.98
solubility in water: 20%
appearance and odor: amber liquid with slight ammonia like odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis acids or mineral acids.
stability condition to avoid: none
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen, aldehydes, organic acids, and undetermined
organics.
conditions to avoid polymerization: avoid mixing resin and curing agent
in batches >one lb total. Do not heat material unless curing
surfaces to be bonded.
Waste disposal methods: dispose of in accordance with local, state, and
federal rules and regulations. Appropriate disposal methods may
include landfill or incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
other rec limits: none recommended
ingred name: silica, amorphous
cas: 7631-86-9
other rec limits: tlv 10 mg/m3
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3 tdust
Ld50 lc50 mixture: none specified by manufacturer
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin irritation and possible
allergic allergic reactions. Prolonged and repeated contact may
cause sensitization which will result in allergic reactions. Bge is
mutagenic in vitro. Mutagenic ity testing in mice gave mixed
results.
explanation of carcinogenicity: none specified by manufacturer
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: none specified by manufacturer
First aid: flush skin and eyes with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation pe rsists, see physician.
Hcc: b2
boiling pt: =140.C, 284.F
vapor pres:
vapor density: 3.8
spec gravity: 1.15
evaporation rate & reference: >1
solubility in water:
appearance and odor: translucent, thixotropic liquid with sweet, plesant
odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: none specified by manufacturer
hazardous decomposition products: carbon monoxide, nitrogen oxides,
aldehydes, acids, and undetermined organics.
conditions to avoid polymerization: avoid mixing resin & curing agent in
batches greater than 1 pound total. Do not heat mixed adhesive
above 150 deg f .
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
Ingred name: epoxy resin system
ingred name: silica
cas: 7631-86-9
< wt: 5.
osha pel: 20 mppcf
ingred name: n-butyl glycidyl ether
cas: 2426-08-6
rtecs #: tx4200000
< wt: 10.
osha pel: 270 mg/m3;50 ppm
acgih tlv: 133 mg/m3;25 ppm
Ld50 lc50 mixture: none specified by manufacturer
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: material is corrosive to skin. May
cause chemical burn to eyes and skin. Repeat contact may cause
sensitization.
explanation of carcinogenicity: none specified by manufacturer
effects of overexposure: possible burns to eyes and skin, irritation and
possible sensitization to skin.
medical cond aggravated by exposure: none specified by manufacturer
First aid: flush skin and eyes with plenty of water. Wash skin
thoroughly with soap 7 water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothes and wash before reuse. If
irritation persi sts, see physician.
Hcc: b2
boiling pt: =277.2c, 531.F
vapor pres:
vapor density: >1
spec gravity: 0.98
evaporation rate & reference:
solubility in water: about 20%
appearance and odor: amber colored liquid with slight ammoniacal odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: carbon monoxide (co), nitrogen oxides
(nox), aldehydes, acids and undetermined organics.
conditions to avoid polymerization: avoid mixing resin and curing agent
in batches greater than 1 pound total. Do not heat mixed adhesives
unless curing surfaces
Waste disposal methods: dispose of as a hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
Ingred name: silica
cas: 7631-86-9
< wt: 5.
osha pel: 20 mppcf
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
< wt: 30.