NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A dressing that stiffens and becomes rigid when either exposed to an appropriate light source, water, or any other hardening material. For use in immobilizing various parts of the body.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Wadding, gauze, bandages and similar articles, impregnated or coated with pharmaceutical substances for medical, surgical etc purposes ne soi
Wadding, gauze, bandages etc. Impregnated or coated with pharmaceutical products or in retail packages for medical, dental or veterinary use, n.E.S.
Pharmaceutical preparations
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
056828 - Medical supplies, viz sub6
651 - Instruments, medical and surgical
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
J - 100.0
M - Medical supplies, equipment, samples, records, etc.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $253.08 to $421.81.. | |
| Does NSN 6510-01-196-6204 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, and U.s. Coast Guard | |
| What is the NIIN of NSN 6510-01-196-6204? | |
| 011966204 or 01-196-6204 | |
| Does NSN 6510-01-196-6204 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6510-01-196-6204? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Dec 12, 1984 | |
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation: at
minimal due to the low vapor pressure. If heated before curing
isocyanates, irritation of the respiratory tract and acute nervous
system depression. Skin & eye c ontact: primary irritation.
chronic: repeated or prolonged overexposure may result in allergic
sensitivity or reaction.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: contact: eye and skin irritation with possible
skin sensitization. Ingestion may cause irritation and possible
corrosive action on the mouth and stomach tissue. Vomiting may
occur. May cause blockage of the g.I.Tract.
medical cond aggravated by exposure: skin condition such as dermititis.
First aid: inhalation: remove from exposure, restore breathein, keep
warm & quiet, notify a physician. Eyes: flush immediately with
plenty of water for 15 minutes. Get immediate medical attention.
skin: wash wit h soap and water. Consult with a physician. Remove
contaminated clothing and launder before reuse. Ingestion: seek
immediate medical attention.
Hcc: n1
boiling pt: b.P. Text: 392f,200c
vapor pres: negligible
spec gravity: 1.23-prepolymer
ph: 4-6
solubility in water: slight
appearance and odor: rolled gauze 3 inch x 4 yds.
percent volatiles by volume: nil
Stability indicator/materials to avoid: no
water, strong alkali, alcohols, metal compounds, surface active agents.
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: none specified by manufacturer.
conditions to avoid polymerization: polymerization may occur if material
is heated for long periods.
Waste disposal methods: dispose of in a manner that complies with local,
state, and federal regulations. Hardened cast material is not
classified as an hazardous waste and may be disposed of in an
ordinary landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polypropylene polyol diphenyl methane diisocyanate
prepolymer
cas: 9048-57-1
fraction by wt: 31-34%
ingred name: methylene bisphenyl isocyanate (mdi) (sara iii)
cas: 101-68-8
rtecs #: nq9350000
fraction by wt: 5-8%
other rec limits: 0.051 mg/m3 (acgih)
osha pel: c, 0.02 ppm
acgih tlv: 0.005 ppm; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
other rec limits: not applicabled
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: fiberglass knit fabric
fraction by wt: 54%
osha pel: 15 mg/m3(total dust)
acgih tlv: 10 mg/m3 (dust)
ingred name: polyethylene core
cas: 9002-88-4
rtecs #: tq3325000
fraction by wt: 2%
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: curing of prepolymer and cast
remov may cause eye and skin irritation. Heating before curing may
release isocyanat vapors which may cause respiratory tract
irritation. Ingestion may cause irrita tion with possible corrosive
action. Excessive exposure to vapors may cause pulmonary edema and
may be delayed.
effects of overexposure: redness, smarting, tearing & swelling of the
eye. Dryness & cracking of the skin. Vomiting from ingestion.
ingestion of the cast material may cause physical blockage of the
gi tract.
medical cond aggravated by exposure: people with chronic diseases of the
skin may be at increased risk when exposed to this material.
First aid: inhalation: move person to fresh air.Restore breathing. Treat
symptomatically. Get medical help. Eyes: flush immediately with
large amounts of water for at least 15 minutes. Get medical
treatment. Ski n: wash affected skin areas with soap and water.
remove contaminated clothing. Consult a physician for allergic skin
reaction.Ingestion: do not induce vomiting: get immediate medical
attention.
Hcc: n1
boiling pt: b.P. Text: 392f,200c
vapor pres: nil
spec gravity: 1.23-prepolymer
solubility in water: reacts
appearance and odor: 4 ydx3 in bandage (fiberglass substrate coated with
a polyurethane resin.
percent volatiles by volume: nil
Stability indicator/materials to avoid: no
water, strong alkali, alcohols, metal compounds, surface active agents.
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: carbon dioxide & carbon dioxide,
nitrogen oxides and isocyanate vapors.
conditions to avoid polymerization: polymerization may occur if material
is heated for long periods.
Waste disposal methods: disposal should be done in accordance with
federal,state and local regulations.Hardened cast material is not
classified as a hazardous waste and may be disposed of in an
ordinary landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polypropylene polyol diphenyl methane diisocyanate
prepolymer
cas: 9048-57-1
fraction by wt: 31-34%
other rec limits: none specified
ingred name: methylene bisphenyl isocyanate (mdi) (sara iii)
cas: 101-68-8
rtecs #: nq9350000
fraction by wt: 5-8%
other rec limits: none specified
osha pel: c, 0.02 ppm
acgih tlv: 0.005 ppm; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 5%
other rec limits: none specified
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: fiberglass
fraction by wt: 54%
other rec limits: none specified
osha pel: 15 mg/m3(total dust)
acgih tlv: 10 mg/m3 (dust)
ingred name: polyethylene as a copolymer
fraction by wt: 2%
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is >5 g/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-uncured material is not expected
to be an irritant when used as directed. Skin-slightly irritating
to unprotected skin. Inhalation-no significant inhalation hazard
existrelative to particle format ion upon removal of the product
with a cast saw. Ingestion-no mortalities or untoward behavior
reactions were noted.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: immediately flush the eyes with plenty of water &
consult a physician. Skin: wash thoroughly with soap & water.
inhalation: provide fresh air. If breathing becomes difficult, call
a physician. S wallowed: drink plenty of water. Do notinduce
vomiting. Consult a nurse or physician.
Hcc: n1
solubility in water: nil
appearance and odor: yellow resin impregnated on knit fiberglass/slight
odor.
Stability indicator/materials to avoid: yes
alkali, strong bases.
stability condition to avoid: water, atmospheric moisture.
hazardous decomposition products: thermal decomposition from open flames
or excessive heat may release oxides of nitrogen, carbon monoxide,
carbon dioxide
Waste disposal methods: incinerate in a facility permitted to accept
chemical wastes is preferred. Completely cured product may be
landfilled or incinerated in accordance with applicable
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: fibrous glass
cas: 65997-17-3
fraction by wt: 55-60%
other rec limits: none recommended
osha pel: 5 mg/m3 rdust z-3
acgih tlv: 10 mg/m3(
ingred name: polypropylene polyol diphenyl methane diisocyanate
prepolymer
cas: 9048-57-1
fraction by wt: 30-35%
other rec limits: none recommended
ingred name: methylene bisphenyl isocyanate (mdi) (sara iii)
cas: 101-68-8
rtecs #: nq9350000
fraction by wt: 5-10%
other rec limits: none recommended
osha pel: c, 0.02 ppm
acgih tlv: 0.005 ppm; 9293
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: tertiary amine
cas: 111681-72-2
fraction by wt: 0.1-2%
other rec limits: none recommended
ingred name: 2,6-di-tert-butyl-p-cresol
cas: 128-37-0
rtecs #: go7875000
fraction by wt:
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9293
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: polydimethyl siloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt:
other rec limits: none recommended
ingred name: benzoyl chloride (sara iii)
cas: 98-88-4
rtecs #: dm6600000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs