NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Diagnostic or lab reagents on a backing, prepared diag/lab reagents whether or not on a backing, not of heading 3002 or 3006; certified ref materials
Composite diagnostic or laboratory reagents, n.E.S.
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
058770 - Drugs/medicines/vitamins noi
532 - Drugs and medicines excluding pencillin, sulfa, serums, vaccines, and vitamins (not requiring temperature control)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
M - Medical supplies, equipment, samples, records, etc.
Q - Subject to damage from freezing
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $581.26 to $968.76.. | |
| Does NSN 6550-01-057-7405 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| No recorded entities for this stock number. | |
| What is the NIIN of NSN 6550-01-057-7405? | |
| 010577405 or 01-057-7405 | |
| Does NSN 6550-01-057-7405 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6550-01-057-7405? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Mar 18, 1978 | |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: the control sera have been prepared
from human blood that was nonreactive when tested for hepatitis b
surface antigen and hiv antibody. However, since no test method can
offer complete assurance, thes e controls and all blood specimens
should be handled as if capable of transmitting disease. Skin: (see
efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: hlth haz: avoid skin contact with control
serums. Eye: avoid contact with eyes.Handle as a biohazard, class
ii (cdc/ nih guidelines)
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush w/water 15 min, hold lids open. Skin: wash with soap
& water. Remove contaminated clothing and launder before reuse.
inhaled: remove to fresh air. Restore breathing if necessary.
ingested: do n ot induce vomiting. Give 2 large glasses of milk or
water and get immediate medical care. Doctor to order vomiting.
nothing by mouth if unconscious. If irritation persists or is
severe,see a doctor.
Hcc: n1
appearance and odor: three part diagnostic test kit. Refer to package
insert.
Stability indicator/materials to avoid: yes
reagents in test kit contain sodium azide which may react w/lead or
copper plumbing to form highly explos metal azides.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: poisonous gas is produced in fire.
Waste disposal methods: place matl in sealed contr & dispose of i/a/w
applic fed, st & loc regs. Avoid disp matl down drains. If occur,
flush w/ lg vol of h2o prevent azide buildup in copper/lead
plumbing. Decontamination pr oc are available from wampole lab,
techservices.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium azide
cas: 26628-22-8
rtecs #: vy8050000
fraction by wt: 0.1%
other rec limits: none specified
osha pel: 0.1 ppm, c
acgih tlv: 0.11 ppm, c
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: non hazardous ingredients
fraction by wt: balance
other rec limits: none recommended
Routes of entry: inhalation: unknown skin: unknown ingestion: yes
health hazards acute and chronic: occupational exposure to this product
is not expected to produce adverse human health effects following
prudent workplace practices. Potential sensitization: this product
contains dry natural rubber ( in the dropper bulb, capillary tube
bulb, and in the vial stopper).
First aid: for ingestion, seek immediate medical attention. For eye
contact, flush with plenty of water and seek medical attention. For
skin contact, wash with soap and water.
Hcc: t6
appearance and odor: test kit consisting of three reagents, calibrated
capillary tubes & bulbs.
Stability indicator/materials to avoid: yes
if disposed down a drain, the sodium azide in this kit may react with
lead and copper plumbing to form highly exposive metal azides.
stability condition to avoid: not applicable.
hazardous decomposition products: if involved in a fire, poisonous gas
may be produced by the packaging materials
conditions to avoid polymerization: will not occur
Waste disposal methods: place material in a sealed container and dispose
of as medical/infectious waste in accordance with applicable
environmental regulations.
Ingred name: sodium azide (as a preservative in reagent and controls)
cas: 26628-22-8
rtecs #: vy8050000
= wt: .1
acgih stel: c0.29 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: unknown skin: unknown ingestion: yes
health hazards acute and chronic: occupational exposure to this product
is not expected to produce adverse human health effects following
prudent workplace practices. Potential sensitization: this product
contains dry natural rubber ( in the dropper bulb, capillary tube
bulb, and in the vial stopper).
First aid: for ingestion, seek immediate medical attention. For eye
contact, flush with plenty of water and seek medical attention. For
skin contact, wash with soap and water.
Hcc: t6
appearance and odor: test kit consisting of three reagents, calibrated
capillary tubes & bulbs.
Stability indicator/materials to avoid: yes
if disposed down a drain, the sodium azide in this kit may react with
lead and copper plumbing to form highly exposive metal azides.
stability condition to avoid: not applicable.
hazardous decomposition products: if involved in a fire, poisonous gas
may be produced by the packaging materials
conditions to avoid polymerization: will not occur
Waste disposal methods: place material in a sealed container and dispose
of as medical/infectious waste in accordance with applicable
environmental regulations.
Ingred name: human source material (contained in negative controls).
Routes of entry: inhalation: unknown skin: unknown ingestion: yes
health hazards acute and chronic: occupational exposure to this product
is not expected to produce adverse human health effects following
prudent workplace practices. Potential sensitization: this product
contains dry natural rubber ( in the dropper bulb, capillary tube
bulb, and in the vial stopper).
First aid: for ingestion, seek immediate medical attention. For eye
contact, flush with plenty of water and seek medical attention. For
skin contact, wash with soap and water.
Hcc: t6
appearance and odor: test kit consisting of three reagents, calibrated
capillary tubes & bulbs.
Stability indicator/materials to avoid: yes
if disposed down a drain, the sodium azide in this kit may react with
lead and copper plumbing to form highly exposive metal azides.
stability condition to avoid: not applicable.
hazardous decomposition products: if involved in a fire, poisonous gas
may be produced by the packaging materials
conditions to avoid polymerization: will not occur
Waste disposal methods: place material in a sealed container and dispose
of as medical/infectious waste in accordance with applicable
environmental regulations.
Ingred name: human source material (contained in positive controls).