NSN 6605-01-059-7264

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6605-01-059-7264, no name available.

NSN 6605-01-059-7264 Datasheet

(NSN) National Stock Number

6605-01-059-7264

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6605 - Navigational Instruments

(NIIN) National Item Identification Number

01-059-7264

Requires Demilitarization

Yes

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

FHZ - Oklahoma city air logistics center 3001 staff drive tinker afb, ok 73145-3303

Questions & Answers

1. What is the FSCG of the NSN 6605-01-059-7264?

   The FSCG of the NSN 6605-01-059-7264 is 6605

2. Does NSN 6605-01-059-7264 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

3. Does NSN 6605-01-059-7264 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6605-01-059-7264 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.