NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles
Military trucks, armored vehicles, etc.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
046230 - Sodiu (soda) caustic etc
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $137.30 to $228.83.. | |
| Does NSN 6810-00-174-6585 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, National Security Agency, U.s. Marine Corps, Department Of The Navy, Bureau Of Mines, Government Printing Office, National Aeronautics and Space Administration, Brazil, Republic Of Korea, Greece, and Turkey | |
| What is the NIIN of NSN 6810-00-174-6585? | |
| 001746585 or 00-174-6585 | |
| Does NSN 6810-00-174-6585 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6810-00-174-6585? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Effects of overexposure: skin: may cause sev burns;eyes: rapidly causes
sev damage;inh: dust/mist may damage entire resp tract.
First aid: immed removal of caustic is of primary importance;skin: flush
w/lg amts of water for 1-2 hrs or until med help arrives;eyes: flush
immed w/copious amts water for at least 15 min.Get med help at once
for eyes/skin burns;inh: remove to fresh air.Get medic
Hcc: b1
spec gravity: 2.13
solubility in water: appreciable
appearance and odor: white pellets without odor.
Stability indicator/materials to avoid: yes
strom oxidizers,acids & flammable matl,reactive metals&salt
stability condition to avoid: humid area
hazardous decomposition products: h2 gas in contact
w/aluminum,zinc,tin,lead & their alloys.
conditions to avoid polymerization: unk
Waste disposal methods: if disposal regs permit discharge of neutral
solns;dissolve in water,cool & neutralize carefully w/dilute
acid,such as acetic acid.Then flush to sewer w/lots of
water.Disposal by a licensed contractor may otherwise by needed.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 97%.
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Effects of overexposure: corrosive to skin. Causes severe & rapid burns
First aid: remove from skin as soon as possible.Wash affected area with
water for at least 15 min. Seek medical attention at once
Hcc: b1
spec gravity: 2.13
solubility in water: complete
appearance and odor: white, deliquescent beads.
Stability indicator/materials to avoid: yes
aluminum, magnesium, zinc
stability condition to avoid: keep away from flammables, acids,metals &
peroxides
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
= wt: 97.
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Effects of overexposure: ingestion: corrosion of tissues, eyes: burn,skin
contact: burn dusts irritating to respiratory tract.
First aid: skin: wash w.Soap & h*2o. Eyes: flush w. H*2o. Ingested: don't
induce vomiting. Inhaled: remove to fresh air. Give cpr/oxygen if
need. Keep warm & quiet. Remove contaminated clothing. Never give
anything by mouth to unconscious person.
Hcc: b1
boiling pt: =1390.C, 2534.F
solubility in water: complete
appearance and odor: white solid, no odor.
Stability indicator/materials to avoid: yes
strong acid & oxidizers.
stability condition to avoid: high temp/heat
hazardous decomposition products: may liberate hydrogen on thermal
decomposistion or w/metals.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 98.3%min
other rec limits: none specified
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: no ingestion: yes
health hazards acute and
chronic: eyes: corrosive,irritation,burns,blindness;skin: corrosive,ir
ritation,burns,scarring;inhalation: severe irritant.Effects vary
from mild irritation to serious damage of upper respiratory
tract.Severe pneu monitis may occur;ingestion: corrosive,burns
mouth,throat,stomach,severe scar of
tissue,death.Chronic: destruct.To tissue.
effects of overexposure: see health hazards
medical cond aggravated by exposure: persons w.Pre-existing skin
disorders or eye problems or impaired respiratory function may be
more susceptible to the effects of the substance.
First aid: eyes: flush w.Plenty wtr for at least 15 min.See doctor
imm;skin: flush w.Plenty wtr for at least 15 min while removng cloth
& shoes.See doctor imm;inhalation: remove to fresh air.If not
breathing give c pr.If breathing is difficult,give o*2.See
doctor;ingestion: do not induce vomit.Give wtr or milk.Nothing by
mouth if unconscious.See doctor immediately.
Hcc: b1
boiling pt: =1945.6c, 3534.F
melt/freeze pt: =317.8c, 604.F
vapor pres: negligible
spec gravity: 2.13
solubility in water: appreciable
appearance and odor: white, deliquescent pellets.
Stability indicator/materials to avoid: yes
contact with wtr,acids,flamm liq,and org.Halogen cmpds,especially
trichloroethylene may cause fire/explosion-see suppl.
stability condition to avoid: very hygroscopic.Can slowly pick up
moisture from air and react with co2 in air to form sodium
carbonate.
Waste disposal methods: caution!Floor and other surface may be
slippery.Do not contact with water.Neutralize traces with dilute
acid.Ensure compliance with local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 100%
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation-severe irritant. Effects
from inhalation of dust/mist vary from mild irritation to serious
damage of the upper respiratory tract. Ingestion-corrosive!
swallowing may cause severe burns of t he mouth, throat, & stomach.
severe scarring of tissue & death may result. Skin-corrosive!
contact with skin can cause irritation or severe burns & scarring
with greater exposure. Eye-corrosive! Cause s irritation of eyes, &
with greater exposures it can cause burns that may result in
permanent impairment of vision, even blindness. Chronic: prolonged
contact with dilute solutions or dusts has a des tructive effects
upon tissue.
explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: inhalation-symptoms may include sneezing, sore
throat or runny nose. Severe pneumonitis may occur.
ingestion-symptoms may include bleeding, vomiting, diarrhea, fall
in blood pressure. Damage may appea r days after exposure.
medical cond aggravated by exposure: persons with a history of skin and
respiratory disorders may be at increased risk from exposure.
First aid: inhalation-remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen.
call a physician. Ingestion-do not induce vomiting! Give large
quantities of wate r or milk if available. Get medical attention
immediately. Skin-immediately flush skin with plenty of water for
15 min while removing contaminated clothes & shoes. Call a
physician, immediately. Eye-i mmediately flush eyes with plenty of
water for 15 min. Get medical attention immediately.
Hcc: b1
boiling pt: =1390.C, 2534.F
melt/freeze pt: =317.8c, 604.F
vapor pres: negligible
vapor density: >1.0
spec gravity: 2.130
viscosity: not relevant
evaporation rate & reference: no information found.
solubility in water: 111g/100g water
appearance and odor: white, deliquescent pellets.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
water, strong acids, most common metals, combustible materials, organic
materials, zinc, aluminum, peroxides.
stability condition to avoid: moisture
hazardous decomposition products: sodium oxide. Decomposition by
reaction with certain metals release flammable and explosive
hydrogen gas.
Waste disposal methods: whatever cannot be saved for recovery or
recycling should be handled as hazardous waste and sent to a rcra
approved waste facility. Processing, use or contamination of this
product may change the wast e management options. State and local
disposal regulations may differ from federal disposal regulati ons.
dispose of container and unused content.
Ingred name: sodium hydroxide (cercla)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 99- 100%
other rec limits: none recommended
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9596
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: no ingestion: yes
health hazards acute and
chronic: eyes: corrosive,irritation,burns,blindness;skin: corrosive,ir
ritation,burns,scarring;inhalation: severe irritant.Effects vary
from mild irritation to serious damage of upper respiratory
tract.Severe pneu monitis may occur;ingestion: corrosive,burns mouth
throat,stomach,severe scar of tissue,death.Chronic: destruct.To
tissue.
effects of overexposure: see health hazards
medical cond aggravated by exposure: persons w.Pre-existing skin
First aid: eyes: flush w.Plenty wtr for at least 15 min.See doctor
imm;skin: flush w.Plenty wtr for at least 15 min while removng cloth
& shoes.See doctor imm;inhalation: remove to fresh air.If not
breathing give c pr.If breathing is difficult,give o*2.See
doctor;ingestion: do not induce vomit.Give wtr or milk.Nothing by
mouth if unconscious.See doctor immediately.
Hcc: b1
boiling pt: b.P. Text: 2534f,1390c
melt/freeze pt: m.P/f.P text: 604f,318c
vapor pres: negligible
spec gravity: 2.13
solubility in water: appreciable
appearance and odor: white, deliquescent pellets.
Stability indicator/materials to avoid: yes
contact with wtr,acids,flamm liq,and org.Halogen cmpds,especially
trichloroethylene may cause fire/explosion-see suppl.
stability condition to avoid: very hygroscopic.Can slowly pick up
moisture from air and react with co2 in air to form sodium
carbonate.
Waste disposal methods: caution!Floor and other surface may be
slippery.Do not contact with water.Neutralize traces with dilute
acid.Ensure compliance with local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 100%
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: mouse -40mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute: corrosive & damaging to all body
tissues;severe irritation and burns of eyes,skin,respiratory or
g.I. Tract.Fat if taken internally,nausea & vomiting.
chronic: lungs damage,dermatitis.
effects of overexposure: skin: causes severe irritation or
burns;ingestion: may cause severe irrit w/burns to mouth.
medical cond aggravated by exposure: pre-existing conditions may be
First aid: skin: wash w.Soap & h*2o. Eyes: flush w.H*2o. Ingested: don't
induce vomiting. Inhaled: remove to fresh air. Give cpr/oxygen if
need. Keep warm & quiet. Remove contaminated clothing. Never giv
anything by mouth to unconscious person.
Hcc: b1
boiling pt: b.P. Text: 2534f,1390c
spec gravity: 2.130
solubility in water: appreciable
appearance and odor: white, odorless solid (flakes).
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids & oxidizers
stability condition to avoid: moisture
hazardous decomposition products: may generate hydrogen gas on contact
with metals
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispo in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 90-100%
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: corrosive, irritation, burns,
blindness. Skin: corrosive, irritation, burns, scarring.
inhalation: severe irritant. Effects vary from irritation to
serious damage of upper respiratory tract. Sev ere pneumonitis may
occur. Ingestion: corrosive. Burns mouth, throat, stomach. Severe
scar and destruction of tissue.
explanation of carcinogenicity: this product is not listed by ntp, iarc,
nor osha as a carcinogen.
effects of overexposure: eyes: severe burns with damage to the eyes and
even blindness. Skin: severe burnes. Inhalation: damage to the
upper respiratory tract and the lung tissue. Ingestion: severe
burnes and complete tissue perforation of mucous membranes of the
mouth, throat, esophagus, and stomach.
medical cond aggravated by exposure: persons with a history of skin and
respiratory disorders may be at increased risk from exposure.
First aid: eyes: flush with water and normal saline. Get medical
attention. Skin: remove contaminated clothing. Wash area with soap
and water. Get medical attention. Inhalation: remove to fresh air.
if breathing stopped give cpr;if difficult give oxygen. Get
medical attention. Ingestion: do not induce vomiting.Give large
amounts of water or milk and then dilute vinegar or citrus juice.
get medical attention.
Hcc: b1
boiling pt: b.P. Text: 2534f,1390c
melt/freeze pt: m.P/f.P text: 604f,318c
vapor pres: 100 @2032f
spec gravity: 2.130
ph: 14
solubility in water: complete
appearance and odor: white or off-white hygroscopic solid. Odorless.
Stability indicator/materials to avoid: yes
avoid contact with water, acids, metals, strong oxiders, combustable
materials, organic materials, zinc and aluminum.
stability condition to avoid: reacts exothermically with water. Can pick
up moisture from air and react with co2 in air to form sodium
carbonate.
hazardous decomposition products: thermal decomposition may release
toxic fumes of sodium oxide. May generate hydrogen gas on contact
with metals.
conditions to avoid polymerization: hazardous polymerization has not
been reported to occur under normal temperatures and pressures.
Waste disposal methods: contact your local environmental officer.
dispose of waste in accordance with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 100%
other rec limits: none specified
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: not given for product as a whole
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: poison! May result in severe
intestinal irritation with burns to mouth. Contact with skin or
eyes may cause severe irritation or burns. Inhalation of dust may
be very irritating to upper respiratory t ract. Will damage any
tissue it comes into contact with.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: intestinal irritation, burns to any contact
tissue, skin irritation/burns, eye irritation/burns, respiratory
tract irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing.
wash with soap and water. If irritation persist, get medical
attention. Inh alation: remove to fresh air. Restore breathing. Get
medical attention. Ingestion: do not induce vomiting. Drink water
followed by egg whites. Get medical attention.
Hcc: b1
boiling pt: b.P. Text: 2534f,1390c
melt/freeze pt: m.P/f.P text: 604f,318c
vapor pres: 1
vapor density: not given
spec gravity: 2.13
evaporation rate & reference: not given
solubility in water: complete
appearance and odor: white pellets or flakes, no odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
acid, acid fumes, many organic compounds, most common metals
stability condition to avoid: moisture
hazardous decomposition products: sodium monoxide and/or sodium peroxide
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 90-100%
other rec limits: none recommended
osha pel: c 2 mg/m3
acgih tlv: c 2 mg/m3; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Hcc: b1
boiling pt: =1390.C, 2534.F
melt/freeze pt: =317.8c, 604.F
spec gravity: 2.13
solubility in water: very soluble.
appearance and odor: white pellets/flakes, no odor.
Stability indicator/materials to avoid: yes
water,co2,acids,flamm liq,org halogen cmpds(especially
trichloroethylene),nitro cmpds(i.E. Nitromethane),al,zn,sn.
stability condition to avoid: exposure to air.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhaled: 200 mg naoh/m3=idlh. Mist=
respiratory tract damage;mild irritation to severe pneumonitis.
chronic: bronchial pneumonia, g/i disturbance. Skin: 25-50% =
irritation w/in 3 min. If nnot removed; severe deep ulceration.
chronic: dermatitis. Eye: disintegration & sloughing of epithelium.
continued in signs & symptoms
explanation of carcinogenicity: manufacturer gave no comments other than
the above references to the three listings.
effects of overexposure: corneal opacification, edema & ulceration.
chronic: conjunctivitis. Ingested: severe abdominal pain, corrosion
of upper mouth area. Vomiting pieces of mucosa asphyxia due to
swelling of throat. Perforat ion of esophagas & stomach may occur.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhaled: if breathing stopped give artificial respiration,get
immediate medical attention. Skin: remove contaminated clothing.
wash area w/soap & water for 15 min. Apply sterile bandages &
secure. Eyes: flush w/copious amt water for 15 min. Get immediate
medical attention. Ingested: do not use gastric lavage or emisis.
dilute w/water or milk. Allow vomiting to occur. Get immediate
medical attention.
Hcc: b1
nrc/state lic num: none
boiling pt: b.P. Text: 253f,123c
melt/freeze pt: m.P/f.P text: 604f,318c
vapor pres: 100mm
spec gravity: 2.130
solubility in water: miscible
appearance and odor: colorless, white or off white hygroscopic solid or
pellet form.
Stability indicator/materials to avoid: yes
aldehyde, acetic acid, acrolein, acrylonitrile, aluminum, hydrofluoric
acid, nitromethane, food sugars, water.
stability condition to avoid: reacts exothermically with water.
hazardous decomposition products: may release toxic fumes of sodium
oxide.
conditions to avoid polymerization: may cause violent polymerization of
acetaldehyde, acrolein, or acrylonitrile.
Waste disposal methods: contact your district director of the epa to
acscertain proper disposal information.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 100%
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9394
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs