Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Technical Trihydrate Sodium Stannate

NSN: 6810-00-239-0910 | Model: S07180
NSN Properties and Flags
NATO Stock Number
6810-00-239-0910
DEMIL
NO
Physical Form
Crystal
Quantity Within Each Unit Package
500.0 grams
Composition And Percentage
91.0 by weight sodium stannate, trihydrate

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 6810-00-239-0910 Datasheet

Supply Class (FSC):
Chemicals
Cross Reference:
  • S07180
  • SODIUM STANNATE
Cage Codes:
  • Pfaltz & Bauer, Inc. (CAGE 93272)
  • Bartlett Chemicals Inc (CAGE 1V771)
Schedule B & Trade:
  • Schedule B: 2841909000 (NAICS 325180)

    Salts of oxometallic or peroxometallic acids, nesoi (excluding aluminates or chomates of zinc or of lead)

  • SITC: 52431

    Salts of oxometallic or peroxometallic acids

  • End Use: 12530

    Chemicals-inorganic

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    046620 - Sodiu (soda) stannate in bbl/bx

  • WCC:

    635 - Chemicals, other than drugs or sundries

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp

  • LTL:

    M - 85.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    24
  • Unit of Measure
    Bt
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $1,103.22 to $1,838.70..
Does NSN 6810-00-239-0910 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, Department Of The Navy, and New Zealand
What is the NIIN of NSN 6810-00-239-0910?
002390910 or 00-239-0910
Does NSN 6810-00-239-0910 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 6810-00-239-0910?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1963
MSDS

Material Safety

MSDS BDMFC SODIUM STANNATE

Hazards

Routes of entry: inhalation: yes skin: unknown ingestion: yes
health hazards acute and chronic: acute: irritation of eyes,skin and
respiratory tract. Chronic: progressive fibrosis or decreased in
pulmonary function.

effects of overexposure: may cause irritation of eyes,skin & respiratory
tract upon contract or inhalation
medical cond aggravated by exposure: pre-existing conditions may be
worsen

First Aid

First aid: eyes: flush eyes for 15 min. Skin: wash thoroughly with soap &
water.Remove contaminated clothes.Call a physician.Launder
contaminated clothing before reuse.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: unkn
vapor pres: unk
vapor density: unkn
spec gravity: 1.16
solubility in water: slight
appearance and odor: white to tan crystals,odorless

Reactivity

Stability indicator/materials to avoid: yes
acids
stability condition to avoid: extreme heat
hazardous decomposition products: sno*2 fumes are formed

Proper Disposal

Waste disposal methods: dissolve in water.Add acid carefully to
neutralize to ph 7.Discard liquid to sewer.Collect solids for
recovery of tin.Disposal must be in accordance with local state &
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium stannate
cas: 12058-66-1
rtecs #: jn6345000
fraction by wt: 98.0%
osha pel: 2mg/cum, as sn
acgih tlv: 2mg/cum, as sn

ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 2.0%
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BDMFD SODIUM-STANNATE

Hazards

Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.

First Aid

First aid: remove to fresh air. Give cpr/oxygen if need. Skin: wash with
soap & water. Eyes: flush with water 15 min. Keep warm and quiet
!

Chemical Properties

Hcc: n1
spec gravity: >1
solubility in water: moderate
appearance and odor: white powder odorless

Reactivity

Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: none

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium stannate
fraction by wt: >91%

ingred name: solids,hazard unknown,unidentified
fraction by wt:

MSDS BDMFF SODIUM STANNATE

Hazards

Effects of overexposure: may cause irritatin of eyes,skin & respiratory
tract upon contact or inhalation

First Aid

First aid: wash thoroughly with soap & water. Remove contaminated
clothes.Call a physician. Launder contaminated clothing before
re-use. Flush eyes with water at least 15 min.

Chemical Properties

Hcc: n1
nrc/state lic num: dated nov,85.

spec gravity: unk
solubility in water: moderate
appearance and odor: white-tan crystals,characteristic odor.

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: dissolve in water, add acid carefully to
neutralize to ph7. Discard liquid to sewer after collecting solids
for recovery of tin.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium stannate
cas: 12058-66-1
rtecs #: jn6345000
fraction by wt: >95%
acgih tlv: 2mg/cum

ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt:
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BHCSF SODIUM STANNATE

Hazards

Ld50 lc50 mixture: tlv 2 mg/m3 as sn
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- irritation of eyes, skin,
respiratory or g.I.Tracts. Chronic- may cause benign pneumoconiosis
(stannosis).

effects of overexposure: irritation of eyes, skin, respiratory or
g.I.Tracts.

medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.

First Aid

First aid: inhalation: remove to fresh air. Resuscitate if not breathing.

get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention. Skin:
remov e contaminated clothing. Wash with soapand water. If
irritation persists, get medical advice. Ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.

Chemical Properties

Hcc: n1
solubility in water: complete
appearance and odor: white/tan crystals,characteristic odor

Reactivity

Stability indicator/materials to avoid: yes
none known.

stability condition to avoid: keep container tightly closed. Material
decomposes in the air.

hazardous decomposition products: none known.

Proper Disposal

Waste disposal methods: disposal must be made in accordance with all
applicable federal, state and local laws and regulations. Dissolve
material in water. Neutralize solution with acid (ph 7). Collect
solids for recovery of tin. Flush liquid to sewers with large amt
of h2o.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium stannate, trihydrate
cas: 12058-66-1
rtecs #: jn6345000
fraction by wt: >95.0%
osha pel: 2 mg/m3 as sn (mfr)
acgih tlv: 2 mg/m3 as sn (mfr)

ingred name: sodium hydroxide (sara iii) *
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt:
osha pel: c 2 mg/m3 *
acgih tlv: c 2 mg/m3; 9192 *
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BNTYQ SODIUM STANNATE

Hazards

Ld50 lc50 mixture: oral ld50 (rat) is 3457 mg/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause eye, skin & respiratory
tract irritation.

explanation of carcinogenicity: this product is not listed by iarc, ntp
or osha as a carcinogen, mutagen, teratogen or neurotoxin.

effects of overexposure: may cause eye, skin & respiratory tract
irritation.

medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.

First Aid

First aid: eyes: immediately flush with running water for at least 15
minutes while lifting eyelids open. If irritation develops or
persists, get medical attention. Skin: wash with soap and plenty of
water. If i rritation develops or persists, get medical attention.

vapor inhalation unlikely: remove to fresh air. Get medical
attention if required. Ingestion: do not induce vomiting. Get
medical attention.

Chemical Properties

Hcc: n1
solubility in water: complete
appearance and odor: white/tan crystals, characteristic odor

Reactivity

Stability indicator/materials to avoid: yes
strong mineral acids
stability condition to avoid: keep container tightly closed; material
decomposes when exposed to air.

hazardous decomposition products: oxides of tin are formed during
combustion.

Proper Disposal

Waste disposal methods: may be sent to an epa-approved waste disposal
facility in accordance with local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium stannate, trihydrate
cas: 12058-66-1
rtecs #: jn6345000
fraction by wt: 100%
other rec limits: none recommended

MSDS BSCTK SODIUM STANNATE

Hazards

Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation may cause
respiratory tract irritation. Low hazard potential. Chronic:
stannosis. A benign pneumoconiosis.

effects of overexposure: eyes: mechanical irritation. Skin: solution may
cause irritation. Inhalation: irritation of nose and throat.

ingestion: extremely large dosages may produce gastrointestinal
disturbances, nausea, vomit ing, abdominal spasms.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: flush with plenty of water for at least 15 minutes. If
irritation persists, see doctor. Skin: wash with soap and water. If
irritation persists, see doctor. Inhalation: remove to fresh air.

give cpr/oxygen if needed. See doctor. Ingestion: drink large
amount of water. See doctor.

Chemical Properties

Hcc: t6
melt/freeze pt: m.P/f.P text: 284f,140c
solubility in water: 61.3g/100g water@68f
appearance and odor: white to off-white crystalline powder, having a
slight yellow cast.

Reactivity

Stability indicator/materials to avoid: no
acids.

stability condition to avoid: slowly decomposes in air to oxide. Avoid
moisture and exposure to air.

hazardous decomposition products: sodium and tin oxides.

Proper Disposal

Waste disposal methods: notify your local environmental officer. Keep in
covered containers pending disposal. Dispose of in accordance with
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium stannate, trihydrate (% obtained from total item
record)
cas: 12209-98-2
fraction by wt: >91%
other rec limits: none recommended
osha pel: 2 mg/m3 (tin)
acgih tlv: 2 mg/m3 (tin)