Worldwide distributor of NSN parts and consumables located in the USA.
A chemical agent used to soften water by demineralization and to treat other compounds by means of a chemical substitution of positive and negative radicals of compounds (ions). Includes natural and resinous types of zeolites. Most types are capable of being regenerated.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Chemical products and preparations of the chemical or allied industries, nesoi
Chemical products and preparations, n.E.S.
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $362.03 to $603.38.. | |
Does NSN 6810-00-559-3267 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Navy, Brazil, Spain, Italy, Greece, and Turkey | |
What is the NIIN of NSN 6810-00-559-3267? | |
005593267 or 00-559-3267 | |
Does NSN 6810-00-559-3267 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 6810-00-559-3267? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Effects of overexposure: eye/skin irritation
First aid: eye: flush eyes & skin with copious quantities of water for 15
min. If irritation persists,see a physician.
Hcc: n1
spec gravity: 1.3
evaporation rate & reference: 1.0,water
solubility in water: negligible.
appearance and odor: dark spherical beads,odorless,ph(aq)=2-4
percent volatiles by volume: 45
Stability indicator/materials to avoid: yes
strong oxidizing agent such as nitric acid.
stability condition to avoid: temp above 240c.
hazardous decomposition
products: co,co*2,so*2,so*3,styrene,divinylbenzene
Waste disposal methods: can be disposed of as ordinary trash.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: cation exchange polymer
fraction by wt: 53%
ingred name: water
rtecs #: zc0100000
fraction by wt: 47%
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt: 50-60%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, respiratory tract.
acute- like other foreign bodies, particles may cause mechanical
irritation of the eye. No effects on skin. Dust may cause
respiratory tract irritation. Ingestion is unlikely. Chronic-
unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation
medical cond aggravated by exposure: persons with pre-existing eye
problems or impaired respiratory function may be more susceptible
to the effects of the dust.
First aid: call physician if symptoms persist. Eye: flush with water for
15 minutes. Hold eyelids open. Skin: wash with soap & water.
inhaled: move to fresh air. Oral: consult a physician.
Hcc: n1
nrc/state lic num: not relevant
decomp temp: decomp text: >428f,>220c
spec gravity: 1.2
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: amber, spherical beads - odorless
Stability indicator/materials to avoid: yes
concentrated nitric acid, strong oxidizing agents
stability condition to avoid: excessive heat (temperatures above
220c/428f)
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur dioxide, sulfur trioxide
Waste disposal methods: this material can be disposed of as ordinary
trash. Ensure compliance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients
fraction by wt: 100%
other rec limits: none recommended
Effects of overexposure: none specified by the mfr.May irritate eyes or
skin.Avoid personal contact.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: n1
spec gravity: u/k
evaporation rate & reference: u/k
solubility in water: negligible
appearance and odor: white to amber solid(beads)-odorless to amine odor
Stability indicator/materials to avoid: yes
none specified
stability condition to avoid: none specified
hazardous decomposition products: none specified
Waste disposal methods: dispose of the collected material in accordance
with local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: anion/cation exchanger (active ingredient) 40-62%,synthetic
zeolite
fraction by wt: 51.0%
acgih tlv: not specified
ingred name: moisture 38-60%
fraction by wt: 49.0%
acgih tlv: not specified
Routes of entry: inhalation: yes skin: unknown ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of eyes,skin and
respiratory tract. Chronic: irritation.
explanation of carcinogenicity: per mfr;no data available (not known)
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: none known to mfr.
First aid: eyes: flush with plenty of water for about 15 minutes;seek
medical help;skin: wash with soap and water;inhalation: remove to
fresh air;ingestion: consult a physician immediately.
Hcc: n1
spec gravity: 1.2
solubility in water: insoluble
appearance and odor: tan to dark brown beads,amine odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents,nitric acids.
stability condition to avoid: extreme heat.
hazardous decomposition products: oxides of carbon,oxides of
nitrogen,oxides of sulfur.
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene divinylbenzene anion exchange resin (hydroxide
form)
cas: 69011-18-3
other rec limits: none recommended
ingred name: styrene divinylbenzene anion exchange resin (hydrogen form)
cas: 69011-20-7
other rec limits: none recommended
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: on eye contact, it may cause
irritation.
effects of overexposure: may cause irritation on eye contact.
medical cond aggravated by exposure: none stated.
First aid: eye contact: flush eyes with large amounts of water and
continue for at least 15 minutes. Get prompt medical attention.
Hcc: n1
vapor pres: 17
vapor density: < water
spec gravity: 1.1-1.3
ph: 5-9
evaporation rate & reference: less than water
solubility in water: negligible
appearance and odor: beads,
Stability indicator/materials to avoid: yes
avoid contact with concentrated nitric acid or any other strong
oxidizing agent at all times.
stability condition to avoid: avoid temperatures over 200c/392f.
hazardous decomposition products: thermal decomposition may yield
styrene monomer, divinylbenzene, alkylamines and oxides of sulfur
and nitrogen.
Waste disposal methods: unused resin may be incinerated or landfilled in
facilities meeting local, state, and federal regulations. For
contaminated resin, the user must determine the hazard and use an
appropriate disposal me thod.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: anion/cation exchange resin.
fraction by wt: 35-50%
other rec limits: none established
osha pel: none established
acgih tlv: none established
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt: 50-65%
other rec limits: none established
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
medical cond aggravated by exposure: eye contact: like other foreign
bodies, particles may cause mechanical irritation ot the eye.
First aid: eye contact: flush with large amounts of water for at least
15 min. Consult physician if irritation persists.
Hcc: n1
spec gravity: 1.2
ph: 5-7
solubility in water: insoluble
appearance and odor: amber spherical beads without odor, ph aqueous
slurry 5 to 7.
Stability indicator/materials to avoid: yes
avoid contact with concentrated nitric acid or strong oxidizing agents.
stability condition to avoid: avoid temperatures above 428f/220c.
hazardous decomposition products: sulfur dioxide, sulfur trioxide,
carbon monoxide, carbon dioxide, styrene monomer, divinylbenzene.
Waste disposal methods: this material can be disposed of as ordinary
trash.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredient
fraction by wt: 100%
other rec limits: none specified
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: can produce mechanical
irritation to the eyes. Skin: may cause skin irritation of
hypersensitive personnel. Chronic exposure: mechanical irritation
to the eyes and skin irritation to hypersensit ive personnel.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: red, irritated eyes. Itching and feeling that a
particle exists between the eyelid and eye.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: flush eyes and skin with copious quantities of water for 15
minutes. If irritation persists, see a physician.
Hcc: n1
nrc/state lic num: none
vapor pres: 17 @ 20c
spec gravity: 1.2
ph: 6-9
evaporation rate & reference: 1 (water=1)
solubility in water: negligible
appearance and odor: spherical beads, slightly fishy odor.
Strong oxidizing agents such as nitric acid.
stability condition to avoid: temperatures above 204c
hazardous decomposition products: carbon dioxide, carbon monoxide,
styrene and divinylbenzene
Waste disposal methods: as supplied, new and used ion exchange resins
generally are not hazardous and therefore are not considered as
hazardous wastes. Regulatory agencies and many disposal agencies
may require verification of the hazardous or non-hazardous
properties.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene divinylbenzene anion exchange resin (hydroxide
form)
cas: 69011-20-7
fraction by wt: 20-30%
other rec limits: none recommended
ingred name: styrene divinylbenzene anion exchange resin (hydroxide
form)
cas: 69011-18-3
fraction by wt: 15-30%
other rec limits: none recommended
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt: 50-60%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: n/a. Hmis: acute- like other foreign
bodies, particles may cause mechanical irritation of the eye. No
effects on skin. Dust may cause respiratory tract irritation.
ingestion is unlikely. Chronic- unkn own.
explanation of carcinogenicity: none
effects of overexposure: irritation
medical cond aggravated by exposure: persons with pre-existing eye
problems or impaired respiratory function may be more susceptible
to the effects of the dust.
First aid: call physician if symptoms persist. Eye: flush with water for
15 minutes. Hold eyelids open. Skin: wash with soap & water.
inhaled: move to fresh air. Oral: consult a physician.
Hcc: n1
nrc/state lic num: not relevant
decomp temp: decomp text: >428f,>220c
spec gravity: 1.20
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: amber to mahogany colored spherical beads -
odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat (temperatures above
220c/428f)
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur dioxide, sulfur trioxide
Waste disposal methods: unused resin may be incinerated or landfilled in
facilities meeting local, state and federal regulations.
Ingred name: non-hazardous ingredients
fraction by wt: 100%
other rec limits: none recommended
Ld50 lc50 mixture: no data provided by responsible party.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: like other foreign
bodies, particles may cause mechanical irritation of the eye.
explanation of carcinogenicity: no data provided by responsible party.
effects of overexposure: eye: mechanical irritation.
medical cond aggravated by exposure: eye contact: like other foreighn
bodies, particles may cause mechanical irritation of the eye.
First aid: eye contact: flush with large amount of water for at least 15
minutes. consult physician if irritation persists.
Hcc: n1
spec gravity: approx 1.2
solubility in water: negligible
appearance and odor: spherical bends with a mix of colors.
Stability indicator/materials to avoid: yes
avod contact with concentrated nitric acid, or strong oxidizing gases.
stability condition to avoid: avoid temperatures over 220c (424f).
hazardous decomposition products: co, co2, so2, so3, nh2, nh3, oh3 and
related amines, divinylbenzene, styrene.
Waste disposal methods: dispose of in accordance with federal, state,
and local regulations.
Ingred name: sulfonated styrene divinylbenzene copolymer in the hydrogen
form
cas: 69011-20-7
minumum % wt: 40.
maxumum % wt: 60.
ingred name: quarternary amine styrene divinylbenzene colpolymer in the
chloride form
cas: 69011-18-3
minumum % wt: 40.
maxumum % wt: 60.
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
minumum % wt: 40.
maxumum % wt: 60.
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: can produce mechanical
irritation to the eyes. Skin: may cause skin irritation of
hypersensitive personnel. Chronic exposure: mechanical irritation
to the eyes and skin irritation to hypersensit ive personnel.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: red, irritated eyes. Itching and feeling that a
particle exists between the eyelid and eye.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: flush eyes and skin with copious quantities of water for 18
minutes. If irritation persists, see a physician.
Hcc: n1
boiling pt: b.P. Text: n/d
melt/freeze pt: =0.C, 32.F
decomp temp: >204.C, 399.2f
vapor pres: 17 @ 20c for h20
vapor density: 0.62/h20
spec gravity: 1.2
ph: 6-9 of slurry
evaporation rate & reference: 1 (water=1)
solubility in water: insoluble
appearance and odor: spherical beads, slightly fishy odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents such as nitric acid. Explosive reactions can
occur in the presence of strong oxidizing agents.
stability condition to avoid: temperatures above 204c decomposition
occurs.
hazardous decomposition products: carbon dioxide, carbon monoxide,
styrene and divinylbenzene
Waste disposal methods: as supplied, new and used ion exchange resins
generally are not hazardous and therefore are not considered as
hazardous wastes. Used resins may meet the regulatory definition of
hazardous wastes as a result of their service. Regulatory agencies
and many disposal sites may require appropriate analysi s of the
material.
Ingred name: benzene, diethenyl-, polymer with ethenylbenzene and
ethenylethylbenzene, sulfonated (hydrogen form)
cas: 69011-20-7
minumum % wt: 20.
maxumum % wt: 30.
other rec limits: not provided
osha pel: not determined.
acgih tlv: not determined.
ingred name: benzene, diethenyl-, polymer with ethenylbenzene and
ethenylethylbenzene, chloromethylated, trimethylamine-quaternized,
hydroxide
cas: 69011-18-3
minumum % wt: 15.
maxumum % wt: 30.
other rec limits: not provided
osha pel: not determined.
acgih tlv: not determined.
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
minumum % wt: 50.
maxumum % wt: 60.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: very slightly hazardous in case of eye
contact (irritant). Non-irritant for skin.
effects of overexposure: very slightly hazardous in case of eye contact
(irritant). Non-irritant for skin.
First aid: eyes: mildly irritating to the eyes. Skin contact slight
chronic: no known effect on skin contact, rinse with water for a
few minutes. Inhalation slight, chronic: allow the victim to rest
in a well ve ntilated area. Seek immediate medical attention.
ingestion slight, chronic: not applicable.
Hcc: n1
vapor density: 0.62(air=1
spec gravity: 1.3(water=1)
ph: 6 to 9(basic)
evaporation rate & reference: 1(butyl acetate=1)
solubility in water: insoluble in cold water
appearance and odor: solid. Yellowish-brown.(light). Odorless
Stability indicator/materials to avoid: yes
highly reactive with oxidizing agents.
stability condition to avoid: this product is stable. Avoid oxidizing
agents.
hazardous decomposition products: carbon oxides (co, co2).
conditions to avoid polymerization: will not occur.
Waste disposal methods: consult your local or regional authorities. As
suppled, new or used ion exchange resins generally are not
hazardous & therefore are not considered as hazardous wastes. Used
resins may meet the regulat ory definition of hazardous waste as a
result of their service. (refer to 40 cr 261).
Ingred name: ionac c-267
cas: 69011-20-7
= wt: 100.
Health hazards acute and chronic: effect of acute exposure to product:
can produce mechanical irritation to the eye. May cause skin
irritation of hypersensitive personnel. Effect of chronic exposure
to product: mechanical irritation t o the eyes and skin irritation
to hypersensitive personnel.
explanation of carcinogenicity: carcinogenicity: n/d.
effects of overexposure: red irritated eyes, itching and feeling that a
particle exists between the eyelid and eye.
First aid: flush eyes and skin with copious quantities of water for 15
minutes. If irritation persists, see a physician.
Melt/freeze pt: =0.C, 32.F
vapor pres: 17 @20c for water
vapor density: 0.62
spec gravity: 1.2
ph: 6-9
evaporation rate & reference: 1(h2o=3)
solubility in water: insoluble
appearance and odor: spherical beads; slightly fishy odor.
Stability indicator/materials to avoid: yes
strong oxidizers such as nitric acid.
stability condition to avoid: at temperatures above 204 deg. C
decomposition occures. Explosive reactions can occur in the
presence of strong oxidizing agents.
hazardous decomposition products: carbon monoxide, carbon dioxide,
styrene and divinylbenzene.
conditions to avoid polymerization: will not occur.
Waste disposal methods: as supplied, new or used ion exchange resins
generally are not hazardous and therefore are not considered as
hazardous wastes. Used resins may meet the regulatory definition of
hazardous waste as a re sult of their service. (refer to 40 cfr
261). "see other info"
Ingred name: benzene, diethenyl-, polymer with ethenylbenzene and
ethenylethylbenzene, chloromethylated, trimethylamine-quaternized,
hydroxide
cas: 69011-18-3
minumum % wt: 15.
maxumum % wt: 30.
ingred name: benzene, diethenyl-, polymer with ethenylbenzene and
ethenylethylbenzene, sulfonated in hydrogen form
cas: 69011-20-7
minumum % wt: 20.
maxumum % wt: 30.
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
minumum % wt: 50.
maxumum % wt: 60.