NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Diagnostic or lab reagents on a backing, prepared diag/lab reagents whether or not on a backing, not of heading 3002 or 3006; certified ref materials
Composite diagnostic or laboratory reagents, n.E.S.
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
N - Dangerous materiel in limited quantities (no label required)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,696.18 to $2,826.97.. | |
| Does NSN 6810-00-987-4126 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, Singapore, Malaysia, and Greece | |
| What is the NIIN of NSN 6810-00-987-4126? | |
| 009874126 or 00-987-4126 | |
| Does NSN 6810-00-987-4126 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6810-00-987-4126? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Nov 02, 1966 | |
Effects of overexposure: inhal-vapor conc>400 ppm-irritation.
eye-liq/conc vapor causes irritation. Skin-prolonged/repeated
contact may cause irritation.
First aid: inhal-get to fresh air;give artificial respir/oxygen if
needed;call physician. Eyes-flush w/water 15 min. Skin-remove
contam cloth;wash area thoroughly w/soap & water.
Hcc: f3
boiling pt: b.P. Text: 294f/145c
vapor pres: 5
vapor density: 3.6
spec gravity: 0.909
solubility in water: negligible
appearance and odor: colorless,oily liquid,penetrating odor.
percent volatiles by volume: 100
Stability indicator/materials to avoid: yes
copper,copper alloys,peroxide catalysts.
stability condition to avoid: none given.
hazardous decomposition products: none given.
conditions to avoid polymerization: heat & light.
Waste disposal methods: mix w/flam solvent if necessary to reduce
viscosity. Spray into incinerator. State & local laws take
precedence.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Effects of overexposure: conjunctivitis,irritation of respiratory
tract,lack of appetite,nausea,vomiting,weakness,drowsiness.
First aid: irrigate eyes with water. Wash contaminated areas of body
with soap & water.
Hcc: f3
boiling pt: b.P. Text: 208f
vapor density: 1.1
spec gravity: 0.90
evaporation rate & reference: 12.4, ether
solubility in water: 0.0
appearance and odor: oily aromatic odor
percent volatiles by volume: 100
Stability indicator/materials to avoid: no
sulfuric acid, oxidizing agents, copper or copper alloys
stability condition to avoid: at elevated temperatures
hazardous decomposition products: polymers
conditions to avoid polymerization: elevated temperature.
Waste disposal methods: dispose of in class 1 chemical dump, or spray by
mist into a furnace under approved controlled conditions.
incineration will become easier by mixing with a more flammable
solvent.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 99.6%
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: para-tert-butylcatechol inhibitor--15ppm.
rtecs #: 9999999zz
Effects of overexposure: conjunctivitis,irritation of respiratory
tract;lack of appetite,nausea,vomiting,weakness,defatting.
First aid: in case of contact,immediately flush eyes or skin with plenty
of water for at least 15 minutes.Call a physician.Wash contaminated
areas of body with soap & water.
Hcc: f3
boiling pt: b.P. Text: 293f
vapor pres: 6
vapor density: 3.6
spec gravity: 0.92
solubility in water: negligible
appearance and odor: colorless to yellowish,penetrating odor
percent volatiles by volume: 100
Stability indicator/materials to avoid: yes
peroxides & strong acids, oxidizing agents
stability condition to avoid: heat,sparks & open flame
conditions to avoid polymerization: contamination with
poly.Catalyst,e.G.Peroxides,acids,hi tem
Waste disposal methods: atomize into an approved incinerator under
controlled conditions,providing local disposal regulations
permit.Incineration will become easier by mixing with a more
flammable solvent
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 100%
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Effects of overexposure: eyes: irritation by
liq/vap;inhal/ingest: irritates nose/throat.Causes
nausea,head,vomit;skin: irritn.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: f4
boiling pt: b.P. Text: 145f(293c)
vapor pres: 5
vapor density: 3.6
spec gravity: 0.9075
evaporation rate & reference: 0.49(bu-acetate=1)
solubility in water: negligible
appearance and odor: clear,colorless liquid,characteristic odor
percent volatiles by volume: 100
Stability indicator/materials to avoid: yes
oxidizers & strong acids
stability condition to avoid: heat & flames
hazardous decomposition products: co, co*2 by thermal decomposition
conditions to avoid polymerization: contamination with peroxides,strong
acids & high temperature
Waste disposal methods: eliminate ignition sources. Destroy by liquid
incineration. Incineration will be easier by mixing with a more
flammable solvent. Handle & dispose in full compliance with all
applicable international,f ed,state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 100%
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Effects of overexposure: bad odorant,eye & nasal
irritation,dizziness,drunkeness;high levels-anesthesia.
First aid: eye & skin: flush with water.Inhalation-remove to fresh
air,keep warm & quiet,cpr if necessary.Ingestion-no known
antidote.Obtain immediate medical attention.
Hcc: f3
boiling pt: b.P. Text: 293.4f
vapor pres: 4.5
vapor density: 3.6
spec gravity: 0.905
solubility in water: negligible
appearance and odor: liquid,sweet odor when pure,sharp odor when impure
percent volatiles by volume: 100
Stability indicator/materials to avoid: no
avoid acid,base,corrosive & oxidizing material
stability condition to avoid: open flame,sealed containers may rupture
at hi temperatures.
conditions to avoid polymerization: heat,metal salts,such as ferric &
ammonium chlorides.
Waste disposal methods: incinerate in proper furnace in accordance
w.Federal,state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 99.5%
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: oral ld50 (rat) is 316 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: vapors and mist may irritate the nose
& throat. Inhalation of very high concentrations or prolonged
exposure may cause unconsciousness. Eye-irritation. Liquid & mist
may damage the eyes.
explanation of carcinogenicity: not listed by these organizations as a
carcinogen. Iarc has proposed to reclassify styrene as "possibly"
carcinogenic.
effects of overexposure: inhalation of higher concentrations may cause
may cause drunkeness, anesthetic or narcotic effects with nausea,
headache, vomiting and coma. Skin: may dry the skin, dermatitis,
cracking, blistering, b urn.
medical cond aggravated by exposure: none reported.
First aid: inhaled: remove to fresh air. Give cpr if not breathing. Get
immediate medical attention. Eye: immediately flush eyes with lots
of water for 15 minutes. Get immediate medical attention. Skin:
flush sk in with lots of water for 15 minutes. Remove contaminated
clothing & shoes. Get immediate medical attention. Ingestion: do
not induce vomiting. Get immediate medical attention.
Hcc: f3
boiling pt: b.P. Text: 293f,145c
vapor pres: 4.5
vapor density: 3.6
spec gravity: 0.90
solubility in water: nil
appearance and odor: clear, colorless liquid, sweet odor
Stability indicator/materials to avoid: yes
acids, oxidizing materials, alkalis, metallic halides and peroxides.
stability condition to avoid: maintain inhibitor level and keep below 90
f/32 c heat.
hazardous decomposition products: may liberate carbon monoxide or carbon
dioxide.
conditions to avoid polymerization: heat, contact with metal halides or
peroxides or oxygen also contribute to polymerization.
Waste disposal methods: consult appropiate federal, state, and local
regulatory agencies for proper disposal information. Keep out of
sewers, storm drains, surface waters and soil.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 99% %
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: oral ld50 (rat) is 5000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: acute: inhal: irrit to resp tract &
other muc mem. Eye: moderate irrit. Skin: delayed irrit.
ingest: slight health hazard if skin absorption exposure.
chronic: cns depressant, allergic sensitizer, aspiratio n hazard.
explanation of carcinogenicity: per iarc styrene "is probably
carcinogenic to humans" however "no adequate evidence" is
available.
effects of overexposure: inhal: coughing, shortness of breath, sneezing,
sore throat. Eye: burning sensation, tearing, redness or selling.
skin: blistering, redness, swelling, itching, discomfort. Other
symptoms may be nausea, l oss of appetite, cns depression and
general weakness.
medical cond aggravated by exposure: pre-existing cns disorders.
First aid: inhal: remove to fresh air.Give oxygen or artificial resp as
needed. Eye: rinse w/water for 20min opening eyelids. Skin: remove
contaminated clothing. Wash thoroughly w/mild soap/water. Flush
w/lukewarm water for 15mins. If sticky use waterless cleaner
first. Ingest: if lg amt give lukewarm water "pint" if
conscious/alert. Do not induce vomiting. Seek medical attention in
all cases.
Hcc: f4
boiling pt: b.P. Text: 295f,146c
melt/freeze pt: m.P/f.P text: n/d
vapor pres: 4.5
vapor density: 3.6
spec gravity: 0.90 @ 77f
evaporation rate & reference: complete
solubility in water: negligible
appearance and odor: colorless liquid with aromatic, sweet odor.
percent volatiles by volume: 100
Stability indicator/materials to avoid: no
oxidizers, peroxides, strong acids, oleum, aluminum chloride, alkal,
metalgraphite, pure oxygen, vinyl polymers.
stability condition to avoid: avoid heat, flame, contaminants. Corrosive
to copper & copper alloys. Dissolves rubber.
hazardous decomposition products: emits acrid fumes, incomplete
combustion may produce carbon monoxide and carbon dioxide.
conditions to avoid polymerization: product is stable w/an appropriate
level of inhibitor, but reactive "unstable" without. Contact arco
sales rep for info.
Waste disposal methods: contaminated material may be rcra/osha haz waste
due to potential for internal heat generation. Landfill solids @
permitted sites. Burn conc liq in sys that use compatible
fuel;dilute w/clean low visc osity fuel. Dispose iaw
fed/state/localregulation
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 99.8%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9394
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: p-tertiary butyl catechol
cas: 98-29-3
fraction by wt: 10-60%pp
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is 316 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: vapors and mist may irritate the nose
& throat. Inhalation of very high concentrations or prolonged
exposure may cause unconsciousness. Eye-irritation. Liquid & mist
may damage the eyes.
explanation of carcinogenicity: not listed by these organizations as a
carcinogen. Iarc has proposed to reclassify styrene as "possibly"
carcinogenic.
effects of overexposure: inhalation of higher concentrations may cause
may cause drunkeness, anesthetic or narcotic effects with nausea,
headache, vomiting and coma. Skin: may dry the skin, dermatitis,
cracking, blistering, b urn.
medical cond aggravated by exposure: none reported.
First aid: inhaled: remove to fresh air. Give cpr if not breathing. Get
immediate medical attention. Eye: immediately flush eyes with lots
of water for 15 minutes. Get immediate medical attention. Skin:
flush sk in with lots of water for 15 minutes. Remove contaminated
clothing & shoes. Get immediate medical attention. Ingestion: do
not induce vomiting. Get immediate medical attention.
Hcc: f3
boiling pt: b.P. Text: 293f,145c
vapor pres: 4.5 mm hg
vapor density: 3.6(air=1)
spec gravity: 0.90 (water=1)
evaporation rate & reference: n/k (n-butyl acetate=1)
solubility in water: nil
appearance and odor: clear, colorless liquid, sweet odor
Stability indicator/materials to avoid: yes
acids, oxidizing materials, alkalis, metallic halides and peroxides.
stability condition to avoid: maintain inhibitor level and keep below 90
f/32 c heat.
hazardous decomposition products: may liberate carbon monoxide or carbon
dioxide.
conditions to avoid polymerization: heat, contact with metal halides or
peroxides or oxygen also contribute to polymerization.
Waste disposal methods: consult appropiate federal, state, and local
regulatory agencies for proper disposal information. Keep out of
sewers, storm drains, surface waters and soil.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 99% %
other rec limits: none specified
osha pel: 50 ppm/100 stel
acgih tlv: s,50ppm/100stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: p-t-butylcatechol (4-tert-butylcatechol)
cas: 98-29-3
rtecs #: ux1400000
other rec limits: 600 ppm 5 min/3 hr
osha pel: 200 ppm (ceiling)
acgih tlv: 100 ppm stel
Ld50 lc50 mixture: no data provided by manufacturer
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: target organs: central nervous system,
respiratory system, eyes, skin. inhalation: excessive inhalation
respiratory system, irritation, may cause pulmonary edema,
narcosis. Ingestion: irritation and burns to mouth and stomach.
skin: burns. Eye: irritation, burns. Chronic: central nervous
system depression.
explanation of carcinogenicity: styrene (100-42-5) : iarc "2b" category.
effects of overexposure: inhalation: pulmonary edema, narcosis.
ingestion: irritation, burns to mouth & stomach. Skin: burns. Eyes:
irritation, burns.
medical cond aggravated by exposure: no information found.
First aid: inhalation: if inhaled, remove to fresh air. If not
breathing, give artificial respiration. If breathing is difficult,
give oxyge. Prompt action is essential. Ingestion: induce vomiting
immediately as directed by medical personnel. Never give anything
bymouth to an unconscious person. Get medical attention. Skin: in
case of contact, immediately flush skin with plenty of water for at
least 15 min w hile removing contaminated clothing & shoes. Wash
clothing before reuse. Eye: in case of eye contact, immediately
flush with plenty of water for at least 15 minutes.
Hcc: f3
boiling pt: =145.C, 293.F
melt/freeze pt: =-31.C, -23.8f
vapor pres: 5 @ 20c/68f
vapor density: 3.6(air=1)
spec gravity: 0.91
ph: no info found
evaporation rate & reference: no information found
solubility in water: negligible (
appearance and odor: prisms, odorless.
percent volatiles by volume: @ 21 c: 100
Federal regulatory information: styrene (100-42-5) - cercla: 1000 lbs.
tsca 12(12b): no. Chemical weapons convention: no. Cdta: no.
state regulatory information: no data provided by manufacturer.
Waste disposal methods: whatever cannot be saved for recovery/recycling
should be handled as hazardous waste & sent to a rcra approved
waste facility. Processing/use/contamination of this product may
change the waste managem ent options. State & local disposal
regulations may differ from federal.Dispose of container/unused
contents i/a/w federal, state, local regulations
Ingred name: styrene monomer (sara 313)
cas: 100-42-5
rtecs #: wl3675000
minumum % wt: 90.
maxumum % wt: 100.
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9596
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: ld50 (oral, rat) is 5,000 mg/kg.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, cns,
respiratory system. Acute- eye: irritation and burns. Skin: burns.
inhalation: excessive inhalation respiratory system irritation,
may cause pulmonary edema, narcosis. I ngestion: irritation and
burns to mouth and stomach. Chronic- central nervous system
depression.
explanation of carcinogenicity: none identified
effects of overexposure: eye: irritation and burns. Skin: burns.
inhalation: excessive inhalation respiratory system irritation,
may cause pulmonary edema, narcosis. Ingestion: irritation and
burns to mouth and stomach. Chro nic- central nervous system
depression.
medical cond aggravated by exposure: none identified
First aid: eye: immediately flush with water for at least 15 minutes.
skin: immediately flush skin with plent of water for at least 15
minutes while removing contaminated clothing and shoes. Wash
clothes before re-use. inhalation: remove to fresh air. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Ingestion: call a physician. If swallowed, give large
amounts of water. induce vomiting.
Hcc: f3
nrc/state lic num: not relevant
boiling pt: =145.C, 293.F
melt/freeze pt: =-30.4c, -23.F
vapor pres: 5 @ 68f
vapor density: 3.6
spec gravity: 0.91
solubility in water: negligible (
appearance and odor: prisms - odorless
percent volatiles by volume: 100
Stability indicator/materials to avoid: yes
strong oxidizing agents, copper, strong acids, metallic salts,
catalysts and accelerators
stability condition to avoid: light, air, heat, flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide
Waste disposal methods: dispose in accordance with all applicable local,
state and federal environmental regulations. epa hazardous waste
number: d001 (ignitable waste)
Ingred name: styrene monomer (sara 313)
cas: 100-42-5
rtecs #: wl3675000
minumum % wt: 90.
maxumum % wt: 100.
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9596
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Health hazards acute and chronic: emergency overview: danger ! Flammable
! Causes burns. Harmful if swallowed or inhaled. Target organs:
central nervous system, respiratory system, eyes, skin. Inhalation:
excessive inhalation may caus e respiratory system irritation,
pulmonary edema, narcosis. Ingestion: irritation, and burns to
mouth and stomach. Skin contact: burns. Eye contact: irritation,
burns. Chronic exposure: central nervou s system depression.
explanation of carcinogenicity: iarc category 2b cacinogen: "agent is
possibly carcinogenic to humans".
effects of overexposure: nhalation: irritation, pulmonary edema,
narcosis. Ingestion: irritation and burns to mouth and stomach.
skin contact: burns. Eye contact: irritation, burns. Chronic
exposure: central nervous system de pression.
medical cond aggravated by exposure: no information found.
First aid: inhalation: move to fresh air. If not breathing, give
artifical respiration. If breathing is difficult, give oxygen.
ingestion: induce vomiting immediately as directed by medical
personnel. Never giv e anything by mouth to an unconscious person.
get medical attention. Skin contact: flush with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
wash clothing befo re re-use. Eye contact: in case of eye contact,
immediately flush with plenty of water for at least 15 minutes.
Hcc: f3
boiling pt: =145.C, 293.F
melt/freeze pt: =-31.C, -23.8f
vapor pres: 5 mm hg @20c (68f)
vapor density: 3.6(air=1)
spec gravity: 0.91
evaporation rate & reference: no information foun.
solubility in water: negligible (
appearance and odor: manufacturer's msds: prisms, odor: odorless.
(melting temperature: -23.8f)
percent volatiles by volume: 100 @70f
Federal regulatory information: chemical inventory status - part 1:
styrene (100-42-5): tsca: yes; ec: yes; japan: yes; australia: yes.
chemical inventory status - part 2: korea: yes; canada dsl: yes;
canada ndsl: no; phil.: yes.
state regulatory information: (contd. From "other info") closed
container. Use with adequate ventilation. Wash thoroughly after
handling. In case of fire, use alcohol foam, dry chemical, carbon
dioxide. Water may be ineffective. F lush spill area with water
spray. Prevent run-off from entering drains, sewers, or streams.
Waste disposal methods: material not recovered or recycled should be
handled as hazardous waste and sent to a rcra approved waste
facility. Processing, use, contamination of product may change
waste options. State and local regulations may differ from federal
regulations. Dispose of container and unused contents in accorda
nce with federal, state, and local regulations.
Ingred name: styrene
cas: 100-42-5
rtecs #: wl3675000
minumum % wt: 90.
maxumum % wt: 100.
osha pel: see table z-2
acgih tlv: 213 mg/m3;50 ppm
acgih stel: 426 mg/m3;100 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs