NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Diagnostic or lab reagents on a backing, prepared diag/lab reagents whether or not on a backing, not of heading 3002 or 3006; certified ref materials
Composite diagnostic or laboratory reagents, n.E.S.
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $544.56 to $907.61.. | |
| Does NSN 6810-01-447-6498 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, Singapore, and Netherlands | |
| What is the NIIN of NSN 6810-01-447-6498? | |
| 014476498 or 01-447-6498 | |
| Does NSN 6810-01-447-6498 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6810-01-447-6498? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 12, 1997 | |
Routes of entry: inhalation: yes skin: unknown ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: causes eye burns. Skin
contact: causes burns. Ingestion: toxic causes: severe burns may
cause: central nervous system effects kidney damage, dizziness,
nausea, vomiting, liver damage, com a, death. Inhalation: causes:
severe burns, shortness of breath, coughing. Target organs:
kidneys, central nervous system, bone marrow, liver.Chronic
effects: lithium compounds have been implicated in development of
aplastic anemia. Signs of lithium poisoning include dehydration,
extreme weight loss, fine tremors of hands, nausea, vomiting and
diarrhea, chronic overexposure may cause central nervo us system
effects kidney & liver damage.
explanation of carcinogenicity: tests performed on this product /
components gave insufficient evidence to classify for
carcinogenicity.
effects of overexposure: eye contact: causes eye burns. Skin contact:
causes burns. Ingestion: toxic causes: severe burns may cause:
central nervous system effects kidney damage, dizziness, nausea,
vomiting, liver damage, com a, death. Inhalation: causes: severe
burns, shortness of breath, coughing. Target organs: kidneys,
central nervous system, bone marrow, liver. Lithium compounds have
been implicated in development of aplastic anemia. Signs of
lithium poisoning include dehydration, extreme weight loss, fine
tremor of hands, nausea, vomiting and diarrhea, chronic
overexposure may cause central nervous system effects kidney
damage liver damage.
medical cond aggravated by exposure: none reported.
First aid: eye contact: immediately flush eyes with water for 15
minutes. Call physician. Skin contact: wash skin with plenty of
water for 15 minutes. Remove contaminated clothing. Call physician
immediately. In gestion: do not induce vomitng. Give 1-2 glasses of
water. Call physician immediately. Never give anything by mouth to
an unconscious person. Inhalation: remove to fresh air. Give
artificial respirati on if necessary. Call physician.
Hcc: b1
melt/freeze pt: >400.C, 752.F
spec gravity: 1.48
ph: >11
evaporation rate & reference: n/a (water=1)
solubility in water: partially soluble
appearance and odor: bright yellow powder, solid.
Stability indicator/materials to avoid: yes
incompatable with: acid metals combustible materials.
stability condition to avoid: stable when stored under normal
conditions. Conditions to avoid: excess moisture, heat.
hazardous decomposition products: contact with metals may release
flammable hydrogen gas. Toxic fumes of: hydrogen bromide sodium
monoxide sulfur oxides.
conditions to avoid polymerization: will not occur.
Waste disposal methods: work in an approved fume hood. Dilute material
with excess water making a weaker than 5% solution. Adjust to a ph
between 6 and 9 with and acid, such as sulfuric or citric. Open
cold water tap complet ely, slowly pour the reacted material to the
drain. Allow cold water to run for 5 minutes to complet ely flush
the system.
Ingred name: lithium hypobromite
cas: 13824-95-8
minumum % wt: 10.
maxumum % wt: 20.
ingred name: lithium hydroxide, anhydrous
cas: 1310-66-3
minumum % wt: 40.
maxumum % wt: 50.
ingred name: sodium sulfate
cas: 7757-82-6
rtecs #: we1650000
minumum % wt: 35.
maxumum % wt: 45.
Ld50 lc50 mixture: oral rat ld50 = 2340 mg/kg
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: causes eye burns. Skin
contact: may cause irritation. Ingestion: causes: irritation of the
mouth and esophagus. Inhalation: may cause: irritation of nose and
throat.
effects of overexposure: eye contact: causes eye burns. Skin contact:
may cause irritation. Ingestion: causes: irritation of the mouth
and esophagus. Inhalation: may cause: irritation of nose and
throat.
medical cond aggravated by exposure: none reported.
First aid: eye contact: immediately flush eyes with water for 15
minutes. Call physician. Skin cantact: wash skin with plenty of
water. Call physician if irritation develops. Ingestion: do not
induce vomitng. Gi ve 1-2 glasses of water. Call physician
immediately. Never give anything by mouth to an unconscious person.
inhalation: remove to fresh air. Give artificial respiration if
necessary. Call physician.
Hcc: t6
melt/freeze pt: =325.C, 617.F
spec gravity: 2.25
ph: 1.0
evaporation rate & reference: n/a (water=1)
solubility in water: soluble
appearance and odor: white powder, solid
Stability indicator/materials to avoid: yes
strong bases reducers.
stability condition to avoid: stable when stored under normal
conditions. Conditions to avoid: excess moisture.
hazardous decomposition products: heating to decomposition releases
toxic and/or corrosive fumes: sulfur.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dilute material with excess water making a
weaker than 5% solution. Adjust to a ph between 6 and 9 with
alkali, such as soda ash or sodium bicarbonate. Open cold water tap
completely, slowly pour the reacted material to the drain. Allow
cold water to run for 5 minutes to completely flush the system.
Ingred name: potassium pyrosulfate
cas: 7790-62-7
= wt: 100.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: causes eye burns. Skin
contact: may cause irritation. Ingestion: may cause:
gastrointestinal irritation, nausea, vomiting, diarrhea.
inhalation: may cause: respiratory tract irritation.
explanation of carcinogenicity: tests performed on this product /
components gave insufficient evidence to classify for
carcinogenicity.
effects of overexposure: eye contact: causes eye burns. Skin contact:
may cause irritation. Ingestion: may cause: gastrointestinal
irritation, nausea, vomiting, diarrhea. Inhalation: may cause:
respiratory tract irritation.
medical cond aggravated by exposure: eye conditions skin conditions
respiratory conditions.
First aid: eye contact: immediately flush eyes with water for 15
minutes. Call physician. Skin cantact: wash skin with plenty of
water. Call physician if irritation develops. Ingestion: do not
induce vomitng. Gi ve 1-2 glasses of water. Call physician
immediately. Never give anything by mouth to an unconscious person.
inhalation: remove to fresh air.
Hcc: c2
melt/freeze pt: >155.C, 311.F
m.P/f.P text: 311-338f
spec gravity: 1.61
ph: 1.2
evaporation rate & reference: n/a (water=1)
solubility in water: 50% soluble
appearance and odor: white powder, solid
Stability indicator/materials to avoid: yes
may react violently in contact with: oxidizers.
stability condition to avoid: stable when stored under proper
conditions. Conditions to avoid: excess moisture, heat.
hazardous decomposition products: heating to decomposition releases
toxic and/or corrosive fumes of: sulfur oxides, nitrogen oxides,
carbon monoxide, carbon dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dilute material with excess water making a
weaker than 5% solution. Adjust to a ph between 6 and 9 with
alkali, such as soda ash or sodium bicarbonate. Open cold water tap
completely, slowly pour the reacted material to the drain.
decontaminate the area of the spill with a soap solution.
Ingred name: 1,2-cyclohexylenediaminetetraacetic acid trisodium salt
cas: 36679-96-6
minumum % wt: 15.
maxumum % wt: 25.
ingred name: sodium sulfate
cas: 7757-82-6
rtecs #: we1650000
minumum % wt: 15.
maxumum % wt: 25.
ingred name: 5-sulfosalicylic acid
cas: 5965-83-3
minumum % wt: 65.
maxumum % wt: 75.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: causes eye burns. Skin
contact: may cause irritation. Ingestion: may cause:
gastrointestinal irritation. Inhalation: may cause: respiratory
tract irritation.
effects of overexposure: eye contact: causes eye burns. Skin contact:
may cause irritation. Ingestion: may cause: gastrointestinal
irritation. Inhalation: may cause: respiratory tract irritation.
medical cond aggravated by exposure: eye conditions skin conditions
respiratory conditions.
First aid: eye contact: immediately flush eyes with water for 15
minutes. Call physician. Skin contact: wash skin with plenty of
water. Call physician if irritation develops. Ingestion: do not
induce vomiting. G ive 1-2 glasses of water. Call physician
immediately. Never give anything by mouth to an unconccious person.
inhalation: remove to fresh air.
Hcc: t6
melt/freeze pt: =215.C, 419.F
m.P/f.P text: decomposes
decomp temp: =215.C, 419.F
spec gravity: 2.26
ph: 1.1
evaporation rate & reference: n/a (water=1)
solubility in water: slightly soluble
appearance and odor: white or light pink powder. Solid
Stability indicator/materials to avoid: yes
strong bases, reducers.
stability condition to avoid: stabile when stored under proper
conditions. Conditions to avoid: excess moisture, heating to
decomposition.
hazardous decomposition products: heating to decomposition releases
toxic and/or corrosive fumes of: sulfur oxides.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dilute material with excess water making a
weaker than 5% solution. Adjust to a ph between 6 and 9 with an
alkali, such as soda ash or sodium bicarbonate. Open cold water tap
completely, slowly pour t he reacted material to the drain.
Ingred name: potassium pyrosulfate
cas: 7790-62-7
minumum % wt: 75.
maxumum % wt: 85.
ingred name: other component
minumum % wt: .01
maxumum % wt: .1
ingred name: magnesium sulfate
cas: 10034-99-8
rtecs #: om4508000
minumum % wt: 15.
maxumum % wt: 25.