NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
The last inventory check on this NSN was done on 04/18/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
090960 - Lubricating grease noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $3,532.57 to $5,887.62.. | |
| Does NSN 6850-00-142-9810 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy, Spain, New Zealand, Germany, Republic Of Korea, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 6850-00-142-9810? | |
| 001429810 or 00-142-9810 | |
| Does NSN 6850-00-142-9810 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-00-142-9810? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 15, 1969 | |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
skin: irritation is not expected, but may occur in certain
sensitive individuals.Inhalation: a dust hazard may be created if,
under conditions of use, solid particl es are separated from the
polymeric materix.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: respiratory ailments, silicosis.
medical cond aggravated by exposure: none known by the manufacturer
First aid: inhalation: remove to fresh air. Get medical attention. Eye:
flush with water for 15 minutes while holding eyelids open. Get
medical attention if irritation persists. Skin: wash with soap &
water. If irritation persists, get medical attention. Ingestion:
rinse mouth with water several times.
Hcc: v7
vapor pres: neg.
vapor density: neg.
spec gravity: 1.035
evaporation rate & reference: >1 (butyl acetate=1)
solubility in water: insoluble
appearance and odor: solid, off-white in color, has a slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known by the manufacturer
stability condition to avoid: none known by the manufacturer
hazardous decomposition products: silicon dioxide
Waste disposal methods: consult your local environmental officer.
disposal should be made in accordance with federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: fumedd silica
cas: 112945-52-5
fraction by wt: 5-10%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: treated fumed silica
cas: 68583-49-3
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
Effects of overexposure: stomach discomfort;irritate eye,mild skin
irritation.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: n1
vapor pres: neg
vapor density: neg
spec gravity: 1.032
solubility in water:
appearance and odor: solid form,off white,slight odor
percent volatiles by volume: 1
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: co,co*2,sio*2,toxic zinc metal fumes
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum distillate
fraction by wt:
acgih tlv: 500 ppm(osha)
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause irritation. Skin: may
cause mild irritation. Inhalation: no health hazards known.
ingestion: may cause stomach discomfort.
explanation of carcinogenicity: product contains no materials currently
classified as carcinogenic by iarc, ntp, osha.
effects of overexposure: eyes: irritation. Skin: irritation. Inhalation:
no health hazards known. Ingestion: stomach discomfort.
medical cond aggravated by exposure: none known.
First aid: eyes: flush with large amounts of water. If irritation
persists, get medical attention. Skin: wash area with soap and
water. Inhalation: none known. Ingestion: rinse mouth with water
several times. If adverse symptoms develop, get medical attention.
Hcc: n1
vapor pres: negligible
vapor density: negligible
spec gravity: 1.032
evaporation rate & reference: negligible
solubility in water:
appearance and odor: solid, off white color. Slight odor.
percent volatiles by volume: 1.0 %
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, toxic zinc metal fumes.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum distillate
cas: 8030-30-6
rtecs #: se7555000
fraction by wt: 1-5%
other rec limits: 500 ppm (mfr)
osha pel: 100 ppm
acgih tlv: 100 ppm 9293
ingred name: non hazardous ingredients
fraction by wt: >95% %
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
explanation of carcinogenicity: none
effects of overexposure: eyes: redness. Skin: redness, dryness similar
to windburn. Ingestion: nausea, vomiting.
medical cond aggravated by exposure: may enhance pre-existing skin or
eye diseases.
First aid: inhalation: remove to fresh air. Eyes: flush with water for
several minutes. Skin: wash with soap and water. Ingestion: give
several glasses of water. If any symptoms persist, see doctor.
Hcc: v7
vapor pres:
spec gravity: 1.1 @ 77f
evaporation rate & reference:
solubility in water: negligible
appearance and odor: near colorless, odorless paste
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: silicone dioxide, oxides of carbon
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 9%
other rec limits: none specified
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- skin and eye irritation. A dust
hazard may be created if solid particles are separated from polymer
matrix. May be harmful if swallowed. Chronic- prolonged or repeated
exposure may cause respir atory ailments or silicosis.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: skin: redness, discomfort. Eyes: tearing,
redness, discomfort. Inhalation of dust: coughing, wheezing,
shortness of breath. Ingestion: not specified by mfr but hmis
believes-nausea, vomiting, diarrhea (typical gi tract irritation).
medical cond aggravated by exposure: none known.
First aid: inhalation: remove to fresh air, provide cpr/oxygen if needed.
eye contact: flush with water for 15 minutes. Get medical help. Skin
contact: wash with soap and water. Remove contaminated clothing. Get
me d attention if symptoms persist. Ingestion: rinse mouth with
water several times, drink 1-2 glasses of water or milk. Get
medical help immediately.
Hcc: v7
vapor pres: negligible
vapor density: negligible
spec gravity: 1.032
evaporation rate & reference: negligible (bu ac=1)
solubility in water: slight
appearance and odor: of-white solid; slight odor
percent volatiles by volume: 1.0
Stability indicator/materials to avoid: yes
none known
stability condition to avoid: none known
hazardous decomposition products: carbon monoxide and carbon dioxide,
silicon dioxide, zinc metal fumes, formaldehyde.
Waste disposal methods: disposal should be made in accordance with
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc naphthenate
cas: 12001-85-3
rtecs #: qk9275000
fraction by wt: 1-5%
other rec limits: none recomme
ingred name: trade secret component
fraction by wt: 5-10%
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: silica gel (amorphous silica)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 1-5%
other rec limits: none recomme
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: polydimethyl siloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 80-99%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin. Acute- may
cause eye irritation. Contact with skin is not expected to cause
irritation. May be harmful if ingested. Inhalation is unlikely.
chronic- unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation
First aid: get medical attention if symptoms persist. Skin: remove
contaminated clothing. Wash skin with soap & water. Eye: flush with
water for 15 minutes, holding eyelids open. Inhaled: remove to fresh
air. Oral: do not induce vomiting. Get medical attention.
Hcc: v7
nrc/state lic num: not relevant
boiling pt: b.P. Text: >572f,>300c
vapor pres: negligible
spec gravity: 1.04
viscosity: not relevant
evaporation rate & reference: not relevent
solubility in water: insoluble
appearance and odor: off-white paste; slight sweet odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids, strong bases
stability condition to avoid: excessive heat
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicone dioxide, zinc metal fume
Waste disposal methods: dispose of in accordance with all local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: poly (dimethylsiloxane)/dimethyl polysiloxane
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 80 - 94%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)/silicone dioxide
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5 - 15%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: zinc naphthanate
cas: 12001-85-3
rtecs #: qk9275000
fraction by wt: 1 - 5%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50: unknown.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may irrit. Skin: may cause mild
irrit. Inhal: a dust haz may be created if under conditons of use
solid particles are separated from the polymeric matrix. Oral: none
known.
explanation of carcinogenicity: per msds: carcinogen: none known.
effects of overexposure: eye irrit, mild skin irrit. Dust hazard.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush w/copious amts of water for min of 15mins.Chronic
irrit develops contact physician. Skin: wash contacted areas
w/soap/water. Oral: do not induce vomit.Slowly dilute w/1-2 glasses
of water or m ilk & sekk med attn.Never give anythingby mouth if
unconsc.
Hcc: v7
boiling pt: b.P. Text: >572f,>300c
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: np
vapor pres: na
vapor density: np
spec gravity: 1.04
ph: np
viscosity: np
evaporation rate & reference: na
solubility in water: insoluble.
appearance and odor: paste, slight odor.
percent volatiles by volume:
corrosion rate: np
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, formaldehyde.
Waste disposal methods: disposal should be made in accordance with
local, state and federal regulations.313 chem title iii of
sara: zinc and compounds.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc naphthanate
cas: 12001-85-3
rtecs #: qk9275000
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 0-5%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-may irritate eyes. Skin-may cause
mild skin irritation. Inhalation-not anticipated during industrial
use. Oral-not anticipated during industrial use.
explanation of carcinogenicity: this product does not contain any
ingredients listed by iarc, ntp or osha.
effects of overexposure: irritation
First aid: eye-contact with the eys may cause temporary irritation.
flush eyes with copious amounts of water for a minimum of 15 min.
if chronic irritation develops contact a physician. Skin-contact
with skin is not expected to cause irritation. Wash contacted area
with soap & water. Oral-if ingested do not induce vomiting. Slowly
dilute with 1-2 glasses of water or milk & seek medical attention.
never give anything by mouth to an unconscious person.
Hcc: v7
nrc/state lic num: not relevant
boiling pt: >300.C, 572.F
vapor pres: negligible
spec gravity: 1.04
solubility in water:
appearance and odor: odorless, paste.
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicone dioxide,and formaldehyde.
Waste disposal methods: disposal should be made in accordance with
federal, state and local regulations.
Ingred name: silica, amorphous
cas: 112945-52-5
rtecs #: vv7310000
minumum % wt: .5
maxumum % wt: 5.
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: zinc naphthanate
cas: 12001-85-3
rtecs #: qk9275000
minumum % wt: 1.
maxumum % wt: 5.
other rec limits: none recommended
Ld50 lc50 mixture: none provided by mfr.
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingestion: may be harmful if
swallowed. Skin: may cause mild skin irritation. Inhalation: a dust
hazard may be created if, under conditions of use, solid particles
are separated from the polymeric mat rix. Eye: may irritate eyes.
subcronic (target organ) effects: respiratory ailments. Silicosis
explanation of carcinogenicity: this product or one of its ingredients
present 0.1% or more is not listed as a carcinogen or suspected
carcinogen by ntp, iarc, or osha
effects of overexposure: none provided by mfr.
medical cond aggravated by exposure: none known
First aid: ingestion: rinse mouth with water several times. Skin: wash
with soap & water. Inhalation: move person to fresh air. Eyes: in
case of contact, immediately flush eyes with plenty of water for at
least 15 mins & get medical attention if irritation persists.
Hcc: v6
decomp temp: decomp text: none provided by mfr.
vapor pres: negl.
vapor density: negl.
spec gravity: 1.032 (water=1)
viscosity: none provided by mfr.
evaporation rate & reference: negl (butyl acetate=1)
solubility in water: < 1%
appearance and odor: solid, off-white color, slight odor
percent volatiles by volume: ~ 1.0
corrosion rate: none provided by mfr
Stability indicator/materials to avoid: yes
none known
stability condition to avoid: none known
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, toxic zinc metal fumes, formaldehyde.
conditions to avoid polymerization: will not occur
Waste disposal methods: disposal should be made in accordance with
federal, state & local regulations.
Ingred name: zinc naphthenate
cas: 12001-85-3
rtecs #: qk9275000
minumum % wt: 1.
maxumum % wt: 5.
ingred name: tetramer treated fumed silica
cas: 68583-49-3
minumum % wt: 5.
maxumum % wt: 10.
ingred name: amorphous silica
cas: 7631-86-9
minumum % wt: 1.
maxumum % wt: 5.
ingred name: dimethylpolysiloxanes (non-hazardous)
cas: 63148-62-9
rtecs #: jt6484500
minumum % wt: 80.
maxumum % wt: 99.