Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Activated Desiccant

NSN: 6850-00-167-1676 | Model: 13X 1/8-INCH PELLETS

A chemical product specially prepared to increase the absorption capacity of the basic chemica (s) for the removal of moisture and capable of being restored to approximately its original condition.

NSN Properties and Flags
NATO Stock Number
6850-00-167-1676
DEMIL
NO
Quantity Within Each Unit Package
50.0 pounds
Active Ingredient
Sodium alumosilicate
Moisture Indicator Impregnation
Not included
Special Features
1/8 in. Pellets

Inventory Check

The last inventory check on this NSN was done on 03/19/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 792
  • Overhauled: 1
  • New Surplus: 990
  • Serviceable: 1
  • As Removed: 6

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 6850-00-167-1676 Datasheet

Supply Class (FSC):
Miscellaneous Chemical Specialties
Cross Reference:
  • 13X 1/8-INCH PELLETS
  • 14465-1
  • 542
  • 13X
Cage Codes:
  • Uop Molecular Sieve Dept A Joint (CAGE 0H8X3)
  • Spx Corporation (CAGE 08441)
  • Grace W R and Co (CAGE 16210)
  • Union Carbide Corp (CAGE 36346)
Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    048170 - Clay noi crushed ground/pulverized

  • WCC:

    635 - Chemicals, other than drugs or sundries

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp

  • LTL:

    U - 50.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    No qup
  • Unit of Measure
    Dr
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    9b----5
  • Repariability

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $1,426.01 to $2,376.68..
Does NSN 6850-00-167-1676 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Navy, National Aeronautics and Space Administration, and Australia
What is the NIIN of NSN 6850-00-167-1676?
001671676 or 00-167-1676
Does NSN 6850-00-167-1676 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 6850-00-167-1676?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Feb 14, 1973
MSDS

Material Safety

MSDS BDFDP FORMED MOLECULAR SIEVE;GRADE #542

Hazards

Ld50 lc50 mixture: oral rat ld50 >31,600 mg/kg (48 hrs)
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: irritatng to eyes;prolonged contct causes skin
irritation;inhalation of dust may irrit mucous membrn

First Aid

First aid: eyes and skin: flush with large amount of water for about
15-20 minutes;seek medical attention immediately.Inhalation: remove
to fresh air;call a physician.Ingestion: seek medical attention
immediately.

Chemical Properties

Hcc: n1
spec gravity: 2.1
ph: 10.4
solubility in water: insoluble
appearance and odor: white,gray,or tan,beads.

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: thermal decomposition may give oxides
of aluminum/sodium

Proper Disposal

Waste disposal methods: consult local authorities;disposal must be in
accordance with local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium aluminosilicate
cas: 1344-00-9
other rec limits: none specified

ingred name: calcium sodium aluminosilicate
cas: 1344-01-0
other rec limits: none specified

ingred name: potassium sodium aluminosilicate
cas: 12736-96-8
other rec limits: none specified

ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293

ingred name: molecular sieve
other rec limits: none specified

MSDS BDFDQ MOLECULAR SIEVE TYPE 13 X

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and
chronic: acute-eyes/skin: irritation.Inhalation: may cause irritation
of the nose & throat,cough & chest discomfort.Ingestion: no evidence
of adverse effects known.Chronic-prolonged inhalation may cause
lung dama ge.

effects of overexposure: see health hazards section.

medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory or fibrotic pulmonary disease.

First Aid

First aid: eye contact: flush with water for 15 minutes.Skin contact: wash
with soap & water.Inhalation: remove to fresh air.Ingestion: if large
quantities are swallowed, then drink 2 glasses of water.Induce
vomitin g if conscious.

Chemical Properties

Hcc: v7
spec gravity: 1.1, 2.0(cryst)
appearance and odor: beads, pellets, mesh, cake or powder; odorless

Reactivity

Stability indicator/materials to avoid: yes
sudden contact with high concentration of chemicals having high heats
of absorption such as olefins, hcl, etc.

stability condition to avoid: moisture (water) can cause rise in
temperature which may result in burn.

hazardous decomposition products: will come from the retained materials
by the sieve.In extreme heat, oxides of ingredients will form.

Proper Disposal

Waste disposal methods: disposal should be made in an approved landfill
according to all applicable federal, state and local laws and
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none specified

ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none specified
osha pel: 10 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust

ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

MSDS BZJDL MOLECULAR SIEVE TYPE 13 X

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is >5,000 mg/kg.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
tract. Acute- eyes: may cause irritation/discomfort. Skin: may cause
irritation, burns. Inhale: causes respiratory tract irritation.

burns to moist body tissue may re sult if contact is prolonged.

oral: burns to moist body tissue may occur. Chronic- inhalation may
cause lung damage.

explanation of carcinogenicity: none
effects of overexposure: irritation, cough, wheezing, chest discomfort,
burns, tearing
medical cond aggravated by exposure: breathing of dust may aggravate
existing medical conditions such as respiratory ailments.

First Aid

First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes, holding eyelids open. Skin: wash with soap & water. Oral: if
consci ous, drink 2 glasses of water. Get medical attention
immediately. Never give anything by mouth to an unconscious person.

Chemical Properties

Hcc: t6
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: not known
spec gravity: 1.1 (piece)/2.1
viscosity: not relevant
evaporation rate & reference: not relevant
appearance and odor: tan pellets or white powder - odorless

Reactivity

Stability indicator/materials to avoid: yes
olefins, hydrochloric acid, etc..

stability condition to avoid: moisture
hazardous decomposition products: silicon oxide, aluminum oxide, sodium
oxide, magnesium oxide

Proper Disposal

Waste disposal methods: discard any product (including any retained
materials of use), disposable containers or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: silica gel/silicon oxide
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3

ingred name: alpha-alumina (aluminum oxide) (sara 313)/aluminum oxide
(non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596

ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none recommended

ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3; fume; 9596

MSDS BZJDM MOLECULAR SIEVE TYPE 13 XPG

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is unknown.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
tract. Acute- eyes: may cause irritation/discomfort. Skin: may cause
irritation, burns. Inhale: causes respiratory tract irritation.

burns to moist body tissue may re sult if contact is prolonged.

oral: burns to moist body tissue may occur. Chronic- inhalation may
cause lung damage.

explanation of carcinogenicity: none
effects of overexposure: irritation, cough, wheezing, chest discomfort,
burns, tearing
medical cond aggravated by exposure: breathing of dust may aggravate
existing medical conditions such as respiratory ailments.

First Aid

First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes, holding eyelids open. Skin: wash with soap & water. Oral: if
consci ous, drink 2 glasses of water. Get medical attention
immediately. Never give anything by mouth to an unconscious person.

Chemical Properties

Hcc: b3
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: not known
spec gravity: 1.1 (piece)/2.1
ph: 8- 11
viscosity: not relevant
evaporation rate & reference: not relevant
appearance and odor: tan pellets or beads - odorless

Reactivity

Stability indicator/materials to avoid: yes
olefins, hydrochloric acid, etc..

stability condition to avoid: moisture
hazardous decomposition products: silicon oxide, aluminum oxide, sodium
oxide, magnesium oxide

Proper Disposal

Waste disposal methods: discard any product (including any retained
materials of use), disposable containers or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: silica gel/silicon oxide
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3

ingred name: alpha-alumina (aluminum oxide) (sara 313)/aluminum oxide
(non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596

ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none recommended

MSDS CBQDM GRADE 542 FORMED MOLECULAR SIEVE

Hazards

Ld50 lc50 mixture: 48hr oral ld50 (rat) est >31600 mg/kg.

routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: not considered an occular irrit.Drying
action of matl can cause irrit of muc membranes of
nose/throat/irrit of skin.

explanation of carcinogenicity: per msds: quartz classified by iarc as
class 2a carcinogen.

effects of overexposure: irritation of mucous membranes of nose, throat.

irritation of skin.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye: immed wash w/lg amts of water occasionally lfiting
upper/lower eyelids.Irrit occurs/persists sekk med attn. Skin: wash
w/soap/water. Ingest: matl will pass through body normally.

inhal: remove to fre sh air.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: np
melt/freeze pt: m.P/f.P text: np
decomp temp: decomp text: np
vapor pres: np
vapor density: np
spec gravity: 2.1
ph: supple
viscosity: np
evaporation rate & reference: np
solubility in water: insoluble.

appearance and odor: white, gray, or tan, beads, odorless.

percent volatiles by volume: np
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
reacts w/hf & strong acids or alkali.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: none specified by manufacturer.

Proper Disposal

Waste disposal methods: not known to have any adverse effect on aquatic
enviro when properly dispo.Insolube/non-toxic.Landfill iaw
loc/state/fed regs.Cover to avoid blowing of dust.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sodium oxide
cas: 1313-59-3
other rec limits: none recommended

ingred name: calcium oxide
cas: 1305-78-8
rtecs #: ew3100000
other rec limits: none recommended
osha pel: 5 mg/m3
acgih tlv: 2 mg/m3; 9596

ingred name: potassium oxide
cas: 12136-45-7
rtecs #: tt3790000
other rec limits: none recommended

ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3

ingred name: alpha-alumina (aluminum oxide) (sara 313); (alumina)
cas: 1344-28-1
rtecs #: bd1200000
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596

ingred name: kaolin (clay)
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9596

ingred name: quartz
cas: 14808-60-7
rtecs #: vv7330000
other rec limits: none recommended

MSDS CJFBF MOLECULAR SIEVE TYPE 13 X

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is >5,000 mg/kg.

routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
tract. Acute- eyes: may cause irritation/discomfort. Skin: may cause
irritation, burns. Inhale: causes respiratory tract irritation.

burns to moist body tissue may re sult if contact is prolonged.

oral: burns to moist body tissue may occur. Chronic- prolonged or
repeated exposure may cause lung damage.

explanation of carcinogenicity: iarc-not classifiable as human
carcinogen (gruop 3) (silicon oxide-synthetic).

effects of overexposure: skin-irritation. Eyes, discomfort, irritation.

ingestion-possible burns to moist tissues. Inaled-possible burns to
moist tissues.

medical cond aggravated by exposure: none specified by mfr msds.

dla-hmis: breathing of dust may aggravate existing medical
conditions such as respiratory ailments.

First Aid

First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.

skin: wash with soap & water. Ingested: if conscious, drink 2 glasses
of wa ter. Get medical attention immediately. Never give anything
by mouth to an unconscious person.

Chemical Properties

Hcc: n1
melt/freeze pt: m.P/f.P text: not known
spec gravity: 1.1 (piece)/2.1
viscosity: not relevant
evaporation rate & reference: not relevant
appearance and odor: tan pellets or white powder - odorless

Reactivity

Stability indicator/materials to avoid: yes
sudden contact with high concentrations of olefins, hydrochloric acid,
etc..

stability condition to avoid: moisture
hazardous decomposition products: silicon oxide, aluminum oxide, sodium
oxide, magnesium oxide if exposed to extremely high temperatures.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: discard any product (including any retained
materials of use), disposable containers or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.

Ingredients List

Ingred name: alpha-alumina (aluminum oxide) (sara 313)/aluminum oxide
(non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
< wt: 40.

other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596

ingred name: sodium oxide
cas: 1313-59-3
< wt: 20.

other rec limits: none recommended

ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.

other rec limits: none recommended
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3; fume; 9596

ingred name: silicon dioxide
cas: 7631-86-9
< wt: 60.

osha pel: 15 15 mg/m3 t-dust
acgih tlv: 10 mg/m3 inhalable

MSDS CJSQT GRADE 542 FORMED MOLECULAR SIEVE

Hazards

Ld50 lc50 mixture: 48hr oral ld50 (rat) est >31600 mg/kg.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: molecular sieves are non-fibrous,
synthetic aluminosilicates (zeolites) and they do not cause
significant health problems. when activated, molecular seives act
as a desiccant and can cause a drying irritation of mucous
membranes and skin in case of severe exposure. Quartz can cause
cancer, silicosis or other fibrotic lung disease with prolonged
exposure.

explanation of carcinogenicity: contains quartz.

effects of overexposure: irritation of mucous membranes of nose, throat.

irritation of skin.

medical cond aggravated by exposure: no medical conditions abnormally
aggravated by exposure to this product.

First Aid

First aid: eyes: immediately wash from eyes with large amount of water,
occasionally lifting upper and lower eyelids. If irritation occurs
and persists, seek medical attention . Skin: wash with soap and
water. ingestion: material will pass through body normally.

inhalation: remove to fresh air.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: np
melt/freeze pt: m.P/f.P text: np
decomp temp: decomp text: np
vapor pres: np
vapor density: np
spec gravity: 2.1
ph: 10.3-10.5 slur
viscosity: not applicable.

evaporation rate & reference: not applicable.

solubility in water: insoluble.

appearance and odor: white, gray, or tan, beads, odorless.

percent volatiles by volume: np
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
reacts with hf & strong acids or alkali.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: none specified by manufacturer.

Proper Disposal

Waste disposal methods: landfill in accordance qith local,state and
federal regulations. Cover to avoid blowing of dust.

Ingredients List

Ingred name: sodium oxide
cas: 1313-59-3
fraction by wt: not provid
other rec limits: none recommended

ingred name: calcium oxide
cas: 1305-78-8
rtecs #: ew3100000
fraction by wt: not provid
other rec limits: none recommended
osha pel: 5 mg/m3
acgih tlv: 2 mg/m3

ingred name: potassium oxide
cas: 12136-45-7
rtecs #: tt3790000
fraction by wt: not provid
other rec limits: none recommended

ingred name: silica (synthetic)
cas: 7631-36-9
fraction by wt: not provid
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3

ingred name: alumina (sara 313);
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt: not provid
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
code: f
osha stel: 5 mg/m3
acgih tlv: 10 mg/m3 tdust

ingred name: clay
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: not provid
other rec limits: none recommended

ingred name: quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: not provid
other rec limits: none recommended
osha stel: 0.1 mg/m3 resp.

acgih stel: 0.1 mg/m3 resp.

MSDS CKJGB MOLSIV ADSORBENTS 13X 1/8

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) > 32,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: target organs: prolonged or repeated
inhalation may cause lung injury/cancer. Skin: may cause skin
irritation. The product gets hot as it first adsorbs water. Eye:
dust and/or product may cause eye di scomfort and/or irritation
seen as tearing and reddening. Ingestion: the product gets hot as
it first adsorbs water. Burns to moist body tissues can result if
contact is prolonged. Inhalation: exposur e to dust particles
generated from this material may cause irritation of the
respiratory tract. Repeated and prolonged inhalation of crystalline
silica in the form of quartz from occupational sources may cause
cancer.

explanation of carcinogenicity: inhaled crystalline silica in the form
of quartz from occupational sources is carcinogenic to humans (iarc
group 1). U.S. National toxicology program (ntp): quartz -
reasonably anticipated to be a hum an carcinogen.

effects of overexposure: skin: may cause skin irritation. The product
gets hot as it first adsorbs water. Eye: dust and/or product may
cause eye discomfort and/or irritation seen as tearing and
reddening. Ingestion: the produ ct gets hot as it first adsorbs
water. Burns to moist body tissues can result if contact is
prolonged. Inhalation: exposure to dust particles generated from
this material may cause irritation of the r espiratory tract.

repeated and prolonged inhalation of crystalline silica in the form
of quartz from occupational sources may cause cancer.

medical cond aggravated by exposure: not provided

First Aid

First aid: eye: rinse immediately with plenty of water for at least 15
minutes. If eye irritation persists, consult a physician. Skin:
wash off with soap and plenty of water. If skin irritation
persists, call a physician. After inhalation: remove thevictim
into fresh air. If symptoms persist, call a physician. After
ingestion: immediately give large volume of water to drink. If
symptoms persist, call a physi cian. Note to physician: this
product is a dessicant and generates heat as it adsorbs water. The
used product can contain material of a hazardous nature. Identify
that material and treat symptomatical ly.

Chemical Properties

Hcc: n1
nrc/state lic num: not relevant
decomp temp: decomp text: not provided
spec gravity: no data available.

evaporation rate & reference: not provided
solubility in water: no data available.

appearance and odor: odorless, tan pellets
corrosion rate: not provided

Reactivity

Federal regulatory information: toxic substance control act (tsca): all
the ingredients of this mixture are registered in the tsca chemical
substance inventory.

state regulatory information: california proposition 65: silica,
crystalline. Massachusetts right-to-know: quartz, aluminum oxide.

new jersey right-to-know: silica, amorphous, aluminum oxide,
silica, quartz. Pennsylvania right-to -know: silica, aluminum
oxide, quartz, magnesium oxide.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Proper Disposal

Waste disposal methods: materials of a hazardous nature that contact the
product during normal use may be retained on this product. The user
of the product must identify the hazards associated with the
retained material in o rder to assess the waste disposal options.

Ingredients List

Ingred name: silicon oxide (synthetic)
cas: 7631-86-9
code: f
< wt: 55.

other rec limits: not provided
osha pel: 15 mg/m3 tdust
osha stel: 5 mg/m3 rdust
acgih tlv: 10 mg/m3 tdust
acgih stel: 5 mg/m3 rdust

ingred name: aluminum oxide (non-fibrous)
cas: 1344-28-1
code: f
rtecs #: bd1200000
< wt: 35.

other rec limits: not provided
osha pel: 15 mg/m3 tdust
osha stel: 5 mg/m3 rdust
acgih tlv: 10 mg/m3

ingred name: sodium oxide
cas: 1313-59-3
< wt: 20.

other rec limits: not provided

ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.

other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: quartz
cas: 14808-60-7
rtecs #: vv7330000
< wt: 2.

other rec limits: not provided
osha pel: see table z-3
acgih tlv: 0.1 mg/m3