NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical product specially prepared to increase the absorption capacity of the basic chemica (s) for the removal of moisture and capable of being restored to approximately its original condition.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
048170 - Clay noi crushed ground/pulverized
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
U - 50.0
U - 50.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $57.39 to $95.65.. | |
| Does NSN 6850-00-181-7727 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, U.s. Marine Corps, Department Of The Navy, Brazil, Spain, Kuwait, Germany, Republic Of Korea, Portugal, Italy, Norway, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 6850-00-181-7727? | |
| 001817727 or 00-181-7727 | |
| Does NSN 6850-00-181-7727 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-00-181-7727? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Nov 25, 1970 | |
Ld50 lc50 mixture: na*2o x-type sieves: lc50: >2.8 (see supp)
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: if a large amount of sieve quickly
adsorbs an equilibrium amount of water,they can become hot and
cause thermal burns of the skin.Avoid contact under these
conditions.Quartz can cause silicosis or oth er fibrotic lung
disease with prolongedexposure.
explanation of carcinogenicity: quartz: limited evidence for
carcinogenicity in humans/sufficient evidence for carcinogenicity
in animals (iarc,1987).
effects of overexposure: eyes: not an irritant.Skin: if activated,sieves
are desiccants & can cause drying irrit of muc membr & skin in
extreme expos.All studies to date indicate no significant health
problems.Do not confuse th ese nonfibrous synthetic
aluminosilicates w/ natural zeolites.Ingest: n/k .Inhal: dust may
irrit nose & throat.
medical cond aggravated by exposure: davison knows of no medical
conditions abnormally aggravated by exposure to this product.
First aid: eyes: immediately wash from eyes with large amounts of
water,occasionally lifting upper and lower lids.If irritation
occurs and persists,seek medical attention.Skin: wash with soap and
water.Ingestion: m aterial will pass through body
normally.Inhalation: remove to fresh air.
Boiling pt: b.P. Text: n/k
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: n/k
spec gravity: 2.1 (water=1)
ph: sup da
evaporation rate & reference: n/k
solubility in water: insoluble
appearance and odor: white,gray or tan beads with no odor.
Stability indicator/materials to avoid: yes
reacts with hydrogen fluoride and strong acids or alkali.
stability condition to avoid: n/k
hazardous decomposition products: n/k
Waste disposal methods: disposal must be in accordance with
federal,state and local regulations.Coordination with supporting
installation and/or macom environmental coordination prior to
disposal is recommended to determine appropriate disposal methods
.(see supp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt:
other rec limits: n/k
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: n/k
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
ingred name: sodium aluminosilicate
cas: 1344-00-9
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: calcium sodium aluminosilicate
cas: 1344-01-0
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: potassium sodium aluminosilicate
cas: 12736-96-8
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: explo haz: use approved disposal methods suitable for toxic
wastes.Routes of entry: ingestion/skin .
rtecs #: 9999999zz
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k (fp a/ornl
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: **target-organs: skin** acute-may
cause eye, skin, mucous membrane damage. Chronic-prolonged
inhalation may damage lungs.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis found no listing & does not expect it to be
carcinogenic.
effects of overexposure: mfr gave no information of msds.
medical cond aggravated by exposure: asthma & inflammatory of fibrotic
pulmonary disease.
First aid: seek medical assistance for further treatment, observation &
support if necessary. Eye: flush w/water for 15 min & contact a
physician. Skin: wash affected area w/soap & water.
inhalation: remove to fres h air & get medical assistance if
necessary. Ingestion: in large quantities, drink large amounts of
water. Induce vomiting if patient is conscious.
Hcc: n1
nrc/state lic num: none
spec gravity: 2.1
appearance and odor: product may appear as a bead pellet, mesh cakeor
powder. Odorless
Stability indicator/materials to avoid: yes
sudden contact w/high concentrations of chemicals having high heats of
absorption.
stability condition to avoid: moisture (water) can cause rise in
temperature, contact w/skin may cause burns.
hazardous decomposition products: does not reaadily decompose. Absorbed
materials such as hydrocarbons will be more easily given off.
conditions to avoid polymerization: will not occur.
Waste disposal methods: discard any product, residue, disposable
container or liner in an environmentally acceptable manner in full
compliance with all federal state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none recommended
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3; fume; 9495
ingred name: aluminum oxide
cas: 1302-74-5
rtecs #: gn0231000
fraction by wt:
other rec limits: none recommended
osha pel: 5 mg/m3 resp. Dust
acgih tlv: 10 mg al*2o*3/m3
ingred name: silicon dioxide
cas: 14808-57-0
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute: may cause eye, skin and mucous
membrane irritation. Chronic: prolonged inhalation may cause lung
damage.
effects of overexposure: eye, skin and mucous membrane irritation.
medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory of fibrotic pulmonary disease.
First aid: seek medical assistance for further treatment, observation
and support if necessary. Eye contact-flush eyes with water for 15
minutes and contact physician. Skin contact-wash affected area with
soap a nd water. Inhalation-remove to fresh air and get medical
assistance if necessary. Ingestion-if ingested in large quantities,
drink (2) glasses of water. Contact physician for permission to
induce vomi ting. This product gets hot as it absorbs water. Burns
to moist body tissues can result if contact is prolonged. No other
evidence of adverse effects from available information.
Hcc: n1
spec gravity: 2.1
solubility in water: not soluble
appearance and odor: tan pellets or white powder. Odorless.
Stability indicator/materials to avoid: yes
sudden contact with high concentration of chemicals having high heats
due to adsorption such as oiefins, hci, etc.
stability condition to avoid: the addition of water without flooding can
cause a rise in temperature from the heat of adsorption, and
contact with skin might result in burns.
hazardous decomposition products: unless subjected to extreme
temperatures or chemical conditions, molecular sieve will not
readily decompose.
Waste disposal methods: discard any product residues, disposal container
or liner in an environmentally acceptable manner in full compliance
with federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium oxide
cas: 1313-59-3
< wt: 20.
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: aluminum oxide
cas: 1344-28-1
rtecs #: bd1200000
< wt: 40.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: silicon oxide (sio2)
cas: 7631-86-9
< wt: 60.
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause eye, skin, mucous
membrane irritation. Chronic: prolonged inhalation may cause lung
damage.
explanation of carcinogenicity: not listed.
effects of overexposure: eye, skin and mucous membrane irritation.
medical cond aggravated by exposure: breathing of dust may aggravate
asthma & inflammatory of fibrotic pulmonary disease.
First aid: eye contact-flush eyes with water for 15 min and contact
physician. Skin-wash affected area with soap and water.
inhalation-remove to fresh air and get medical assistance if
necessary. Ingestion-if in gested in large quantities, drink 2
glasses of water. Contact physician for permission to induce
vomiting. This product gets hot as it absorbs water. Burns to moist
body tissue can result if contact i s prolonged. No other evidence
of source effects from available information.
Hcc: n1
nrc/state lic num: none
spec gravity: 2.1
appearance and odor: product may appear as a bead pellet, mesh cake or
powder. Odorless.
Stability indicator/materials to avoid: yes
sudden contact with high concentration of chemicals having high heats
of absorption.
stability condition to avoid: the addition of water without flooding can
cause a rise in temperature from the heat of absorption, and
contact with skin might result in burns.
hazardous decomposition products: does not readily decompose. absorbed
materials such as hydrocarbons will be more easily given off.
Waste disposal methods: discard any product, residue, disposable
container or liner in an environmentally acceptable manner in full
compliance with all federal state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium oxide
cas: 1313-59-3
< wt: 30.
other rec limits: none recommended
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
other rec limits: none recommended
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3; fume; 9495
ingred name: aluminum oxide
cas: 1302-74-5
rtecs #: gn0231000
< wt: 30.
other rec limits: none recommended
osha pel: 5 mg/m3 resp. Dust
acgih tlv: 10 mg al*2o*3/m3
ingred name: silicon dioxide
cas: 14808-57-0
< wt: 50.
other rec limits: none recommended