NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical product specially prepared to increase the absorption capacity of the basic chemica (s) for the removal of moisture and capable of being restored to approximately its original condition.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
048170 - Clay noi crushed ground/pulverized
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
U - 50.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $223.80 to $373.01.. | |
| Does NSN 6850-00-264-6562 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Defense Threat Reduction Agency, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, National Aeronautics and Space Administration, Spain, Singapore, Morocco, Australia, Belgium, France, Germany, Republic Of Korea, United Kingdom, Netherlands, Portugal, Italy, Denmark, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 6850-00-264-6562? | |
| 002646562 or 00-264-6562 | |
| Does NSN 6850-00-264-6562 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-00-264-6562? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1961 | |
Effects of overexposure: irritation of eyes,nose and throat by dust. May
cause skin irritation.
First aid: eye contact: flush with water 15 min, consult physician.
skin: wash with soap and water
Hcc: n1
spec gravity: 1.1
solubility in water: negligible
appearance and odor: white crystalline
Stability indicator/materials to avoid: yes
none known
Waste disposal methods: bury in land fill. Comply with local,state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica gel (sio*2 50%;h*2so 30%;h*2o 20%)
fraction by wt: 99.6%
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: this material is normally packaged and
contained in a bag. if the bag is open, the resulting dust is
classified a nuisance dust, and may cause health hazard when
inhaled, ingested or in contact with eyes and skin. Prolonged
inhalation maycause irritation to the upper respiratory tract and
lung damage. desi pak clay may contain a small amount of
crystalline silica. inhalation of excessive crysta lline silica
may result in an increase in the risk of serious respiratory
disease.
explanation of carcinogenicity: contains less than 1% crystalline silica
(quartz). no exposure to quartz under normal use of this product,
since the product is in granular form and packed in a bag.
effects of overexposure: irritation, cough, dyspnea, wheezing, chest
discomfort, tearing
medical cond aggravated by exposure: breathing of dust may aggravate
existing medical conditions such as respiratory ailments.
First aid: get medical care if symptoms persist. Eyes: immediately flush
with water for 15 minutes, holding eyelids open. Skin: flush with
plenty of water. Inhaled: remove to fresh air. Provide cpr/oxygen if
needed . Oral: if large quantities ingested, contact physician. If
conscious, induce vomiting. Stomach siphone may be applied as well.
milk & fatty acids should be avoided.
Hcc: n1
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: not known
spec gravity: 0.91 - 1.03
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: gray granules - odorless
percent volatiles by volume:
Stability indicator/materials to avoid: yes
stability condition to avoid: moisture
Waste disposal methods: discard any product (including any retained
materials of use), disposable containers or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations. Rec over metal components by
reprocessing ifpossible.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bentonite/montmorillonite clay mineral
cas: 1302-78-9
rtecs #: ct9450000
> wt: 98.
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
< wt: 2.
other rec limits: none recommended
osha pel: see table z-3
acgih tlv: 0.1 mg/m3 rdust;9596
Effects of overexposure: may cause irritation to respiratory system.
First aid: inhalation-remove to fresh air
Hcc: n1
boiling pt: b.P. Text: 2012 f.
vapor pres: 0.0
spec gravity: unk.
evaporation rate & reference: o.O.
solubility in water: negligible
appearance and odor: cream colored powder-odorless.
Stability indicator/materials to avoid: yes
Waste disposal methods: bury in an approved landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: desiccant,activated
fraction by wt: 100%.
acgih tlv: 10 mg/cum (dust
Effects of overexposure: inhal: long-term exposure to respirable xtaline
silica may cause pneumoconiosis;skin: can dry skin.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: n1
spec gravity: 2.0
solubility in water: negligible
appearance and odor: cream to white colored powder
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: waste spills collected may be reclaimed/reused
or disposed i/a/w federal,state & local regulations.Also,used
/unused product should be tested to determine hazard status before
disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 3.0%
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Effects of overexposure: may cause irritation to respiratory system.
First aid: inhalation-remove to fresh air.
Hcc: n1
vapor pres: 0.0
spec gravity: unk
evaporation rate & reference: 0.0
solubility in water: negligible
appearance and odor: cream colored powder-odorless.
Stability indicator/materials to avoid: yes
hazardous decomposition products: none
Waste disposal methods: use as landfill iaw loca,state & federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: activated desiccant
fraction by wt: 100%
acgih tlv: 10mg/cum(dust)
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: acute: eye contact may cause
mechanical irritation if exposed to large amounts of dust. Inhaling
may cause irritation to respiratory tract and lung damage if
exposure is repeated or prolonged.
explanation of carcinogenicity: crystalline silica is listed by iarc as
2a: sufficient evidence in lab animals and limited evidence in
humans.
effects of overexposure: may cause eye and respiratory tract irritation.
medical cond aggravated by exposure: may aggravate existing respiratory
and/or skin ailments.
First aid: eyes: immediately wash from eyes with large amounts of water,
occasionally lifting the upper & lower eye lids. If irritation
occurs and persists, seek medical attention. Skin: wash with soap
and water . Ingestion: material will pass throughthe body normally.
inhalation: remove to fresh air.
Hcc: n1
spec gravity: 2.0
solubility in water: negligible
appearance and odor: grey to off-white 10-30 mesh granules; odorless.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: dispose in an approved landfill according to
local, state and federal regulations. Cover promptly to avoid
blowing dust.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 1-3%
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Ld50 lc50 mixture: oral ld50 (rat) is est. >31,600 mg/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye, skin & respiratory tract
irritation. Chronic: the drying action of this material can cause
irritation of the mucous membranes of the nose and throat and
irritation of the skin. Avoid prolo nged breathing of the dust or
contact of dust with the skin.
explanation of carcinogenicity: this product and its components are not
listed on the iarc, ntp or osha carcinogens lists.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: manufacturer knows of no medical
conditions abnormally aggravated by exposure to silica gel.
First aid: eyes: immediately wash from eyes with large amounts of water,
occasionally lifting the upper & lower eye lids. If irritation
occurs and persists, seek medical attention. Skin: wash with soap
and water . Ingestion: material will pass throughthe body normally.
inhalation: remove to fresh air.
Hcc: n1
spec gravity: 2.1
ph: 3.8 *
solubility in water: insoluble
appearance and odor: small plastic cylinders or individual packets; no
odor.
Stability indicator/materials to avoid: yes
reacts with hf
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: dispose in an approved landfill according to
local, state and federal regulations. Cover promptly to avoid
blowing dust.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica gel
cas: 63231-67-4
rtecs #: vv7322000
osha pel: 80 mg/m3 / % sio2
acgih tlv: 10 mg/m3
ingred name: graphite, synthetic
cas: 7440-44-0
rtecs #: ff5250100
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: acute-this material,classified a
nuisance dust,may cause health hazards if inhaled,ingested/in
contact with eyes & skin.Prolonged inhalation may cause upper
respiratory tract irritation.If large amoun ts are
ingested,intestinal disorders may occur.May cause eye and skin
irritation.Chronic-may cause lung damage.
explanation of carcinogenicity: contains silica which is probably
carcinogenic to human.
effects of overexposure: this material, classified a nuisance dust, may
cause health hazards if inhaled, ingested or in contact with eyes &
skin. Prolonged inhalation may cause upper respiratory tract
irritation and/or lung d amage. If large amounts are ingested,
intestinal disorders may occur. May cause eye and skin irritation.
medical cond aggravated by exposure: persons with pre-existing skin
disorders or eye problems or impaired respiratory function may be
more susceptible to the effects of the substance.
First aid: call a doctor if symptoms persist. Eye: immediately flush with
water for 15 minutes, holding eyelids open. Skin: wash with soap &
water. Inhaled: remove to fresh air. Provide cpr/oxygen if needed.
oral: i f large amounts have been ingested & conscious, induce
vomiting. Call a physician/poison control center immediately.
stomach siphon may be applied. Milk and fatty acids should be
avoided.
Hcc: n1
spec gravity: 0.913 - 1.025
solubility in water: insoluble
appearance and odor: gray granules - no odor
Stability indicator/materials to avoid: yes
none known
stability condition to avoid: stable under normal temperatures and
pressures in sealed containers.
hazardous decomposition products: none known
Waste disposal methods: discard any product, residue, disposable
container or liner in an environmentally acceptable manner, in full
compliance with local, state and federal regulations. Cover
promptly to avoid blowing dust. recover metal components if
possible.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bentonite(inorganic clay)
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: > 98%
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: < 2%
other rec limits: none recommended
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
tract. Acute- eyes: may cause irritation & discomfort. Skin: may
cause irritation, redness. Inhale: causes respiratory tract
irritation & may cause disabling, progres sive pulmonary fibrosis
(silicosis). Oral: no adverse effects expected. Chronic- inhalation
may cause lung damage.
explanation of carcinogenicity: contains crystalline silica (quartz).
effects of overexposure: irritation, cough, dyspnea, wheezing, chest
discomfort
medical cond aggravated by exposure: breathing of dust may aggravate
existing medical conditions such as respiratory ailments.
First aid: get medical care if symptoms persist. Eyes: immediately flush
with water for 15 minutes, holding eyelids open. Skin: flush with
plenty of water. Inhaled: remove to fresh air. Provide cpr/oxygen if
needed . Swallowed: if large quantities ingested, contact physician.
note to physican: desiccant generates heat as it adsorbs water. Used
product can contain hazardous chemicals.
Hcc: n1
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: not known
spec gravity: 2.0
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: negligible
appearance and odor: grey to off-white granules; odorless
Stability indicator/materials to avoid: yes
strong alkali, strong oxidizing agents
stability condition to avoid: moisture
hazardous decomposition products: none
Waste disposal methods: discard any product (including any retained
materials of use), disposable containers or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bentonite (includes ingredients 2 and 3.)
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: see 2&3%
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 1 - 3%
other rec limits: none recommended
osha pel: see table z-3
acgih tlv: 0.1 mg/m3 rdust;9495
ingred name: aluminum silicate,
cas: 12141-46-7
fraction by wt: 97%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause eye, skin and mucous
membrane irritation. Chronic: prolonged inhalation may cause lung
damage.
explanation of carcinogenicity: not listed.
effects of overexposure: drying and irritation.
medical cond aggravated by exposure: asthma.
First aid: seek medical assistance for further treatment,observation and
support (if necessary). Eye contact: flush with water for at least
15 minutes. Skin contact: wash affected area with soap and water.
inhal ation: remove affected person to fresh air. Ingestion: no
adverse effects expected.
Hcc: n1
spec gravity: 2.0(montomorillonite clay
solubility in water: not soluble.
appearance and odor: paper pouch containing tan powder.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: stable. Moisture, clay will absorb
moisture.
hazardous decomposition products: carbon dioxide, carbon monoxide,
water.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose in an approved landfill according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: montmorillonite clay
minumum % wt: 86.
maxumum % wt: 93.
ingred name: crystalline silica quartz
minumum % wt: 2.
maxumum % wt: 4.
osha pel: 2 mg/m3 dust
acgih tlv: 0.1 mg/m3 dust
ingred name: paper
minumum % wt: 5.
maxumum % wt: 10.
Reports of carcinogenicity: ntp: no iarc: unknown osha: no
health hazards acute and chronic: this material is normally packaged and
contained in a bag. If the bag is open, the resulting dust is
classified a nuisance dust, and may cause health hazards when
inhaled, ingested or in contact with eyes and skin. Prolonged
inhalation may cause irritation to the upper respiratory tract
and/or lung damage. If large amounts are ingested, intestinal
disorders may occur. Contact with eye tissue may r esult in
irritation. prolonged or repeated contact with the skin in the
absence of proper hygiene may cause irritation.
explanation of carcinogenicity: prolonged or repeated exposure may
cause lung injury.
effects of overexposure: desi pak clay may contain a small amount of
crystalline silica (quartz). Inhalation of crystalline silica in
the respirable range in excess of the tlv may result in an increase
in the seious respirato ry disease. Avoid breathing the dust. Use
niosh/msha approved respirators when the tlv for crystalline silica
may be exceeded.
First aid: inhalation-remove to fresh air immediately. If breathing has
stopped, give artificial respiration. Keep person warm & at rest.
get medical aid immediately. Ingestio-if large amounts have been
ingested , give emetics to cause vomiting. Stomach siphon may be
applied as well. Milk & fatty acids should be avoided. Get medical
aid immediately. Eyes-wash eyes immediately & carefully for 30 mins
with runn ing water, lifting upper & lower eyelids occasionally.
get prompt medical aid. Skin-avoid repeated or prolonged contact
with chemical, use good hygenic practices. Wash with soap & water.
get medical aid if irritation develops.
Hcc: n1
solubility in water: insoluble
appearance and odor: gray granules. No odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
stability condition to avoid: is stable under normal temperatures and
pressures in sealed containers.
conditions to avoid polymerization: hazardous polymerization will not
occur.
Waste disposal methods: consult applicable local, state, and federal
regulations to select the method of disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: montmorillonite clay material
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: >=99%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
ingred name: silicon dioxide (crystalline quartz)
cas: 14808-60-7
rtecs #: vv7330000
< wt: 1.
osha pel: see table z-3
acgih tlv: 0.1 mg/m3
ingred name: respirable dust
fraction by wt: not detect
osha pel: 0.1 mg/m3
acgih tlv: 0.1 mg/m3