Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $338.66 to $564.44.. | |
Does NSN 6850-00-295-7685 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Poland, Brazil, Spain, Singapore, Malaysia, Canada, Germany, Republic Of Korea, United Kingdom, Netherlands, Portugal, Italy, Greece, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 6850-00-295-7685? | |
002957685 or 00-295-7685 | |
Does NSN 6850-00-295-7685 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 6850-00-295-7685? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Effects of overexposure: eye contact with g-624 may cause temp.Irrit. No
known health hazard.
First aid: eye: flush with water for 15 min.If irrit.Persists have person
examined by a md.
Hcc: n1
spec gravity: 1.03.
solubility in water: negligible
appearance and odor: translucent,grayish grease,essentially odorless.
percent volatiles by volume: 0.0.
Stability indicator/materials to avoid: yes
none known
hazardous decomposition products: thermal decomposition temp.>575f or
combustin co,co*2,sio*2
Waste disposal methods: material when discarded not hazardous waste per
40cfr261.Disposal should be in accordance with applicable state &
local ordinances for the disposal of industrial waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone compound
fraction by wt: 100%.
acgih tlv: unk
Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: no known adverse chronic health
effects.
effects of overexposure: eyes-poss temp discomfort. Skin-may cause
slight irritation after prolonged,repeated expos. Inhal-poss slight
irritation or pain to eyes or respiratory passages. Ingest-amts
transferred to mouth by fi ngers,etc.,during normal opns should not
cause injury.
medical cond aggravated by exposure: may enhance allergic reaction on
some people.
First aid: eyes-flush w/water. Skin-wipe off & flush w/water.
inhal/oral-no problem
Hcc: v7
vapor pres:
spec gravity: 1.1
solubility in water: negligible
appearance and odor: very little odor,paste like,some color
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing matl
hazardous decomposition products: silicon dioxide,carbon dioxide,traces
of incompletely burned carbon products
Waste disposal methods: comply with all local,state & fed regs. Contact
dow corning if any questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingedients
fraction by wt: 91%
other rec limits: none specified
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 9%
other rec limits: none specified
Ld50 lc50 mixture: none noted
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: eye: temporary eye irritation - avoid handling
material and rubbing eyes.
medical cond aggravated by exposure: none stated
First aid: inhalation: remove to fresh air. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with soap and water. Remove contaminated clothing. If
irritation per sists, get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is required. Get medical
advice.
Hcc: n1
spec gravity: 1.03
solubility in water: negligible
appearance and odor: translucent-light white paste- little or no odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids and bases
stability condition to avoid: temperature over 550f
hazardous decomposition products: carbon monoxide, carbon dioxide, sio2,
dust
Waste disposal methods: dispose i/a/w all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethylpolysiloxane
other rec limits: none specified
ingred name: other components (type not specified)
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: may cause
irritation.Skin: irritation is not expected,but may occur in certain
sensitive individuals.Inhalation: a dust hazard may be created if
solid particles are separated from the polymer ic
matrix.Ingestion: none known.Chronic-respiratory ailments and
silicosis.
effects of overexposure: may cause eye irritation. Skin irritation is
not expected, but may occur in certain sensitive individuals.
inhalation of dust is hazardous.
medical cond aggravated by exposure: none known.
First aid: get medical help if symptoms persist.Eyes: flush immediately
with water for 15 minutes holding eyelids open.Skin: wash with soap
& water.Inhalation: remove to fresh air.Ingestion: rinse mouth with
water s everal times.See a physician.
Hcc: v7
boiling pt: b.P. Text: none
spec gravity: 1.035
solubility in water: insoluble
appearance and odor: off-white solid -slight odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: silicon dioxide
Waste disposal methods: spilled material and water rinses are classified
as chemical waste, and must be disposed of in accordance with
local, state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicon fluid/dimethylpolysiloxane
cas: 63148-62-9
fraction by wt: 80 - 90%
other rec limits: none specified
ingred name: fumed silica
cas: 112945-52-5
fraction by wt: 1 - 10%
other rec limits: none specified
osha pel: 6mg/m3
acgih tlv: 6mg/m3
ingred name: trade secret
fraction by wt: 0 - 5%
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
tract. Acute- may cause mild skin irritation. May cause eye
irritation. Ingestion unknown. A dust hazard may be created if,
under conditions of use, solid particl es are separated from the
polymeric matrix causing respiratory tract irritation, if inhaled.
chronic- unknown.
explanation of carcinogenicity: can generate formaldehyde at high
temperatures which is an irritant and potential cancer hazard.
effects of overexposure: irritation
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: rinse mouth with water several
times.
Hcc: v7
nrc/state lic num: not relevant
spec gravity: 1.035
viscosity: not relevant
evaporation rate & reference: >1 (n-butyl acetate=1)
solubility in water: insoluble
appearance and odor: off white solid - slight odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
stability condition to avoid: temperatures above 300f (149c)
hazardous decomposition products: silicone dioxide, formaldehyde
Waste disposal methods: dispose of in accordance with all local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: trade secret component
fraction by wt: 1 - 5%
other rec limits: none recommended
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5 - 10%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 80 - 93%
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: contact may cause mild eye
irritation. Chronic: none known.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: eye: redness, tearing, discomfort.
medical cond aggravated by exposure: none known.
First aid: eyes: immediately flush with lots of water for 15 minutes,
holding lids open. Get medical attention if irritation persists.
skin: wash with soap and water. Ingestion: rinse mouth with water
several ti mes. Inhalation: none known.(hmis recommends-remove from
area of exposure to fresh air. Get medical attention if symptoms
persist)
Hcc: n1
boiling pt: b.P. Text: none
vapor pres: negligible
vapor density: negligible
spec gravity: 1.035 (water=1)
evaporation rate & reference: >1 (n-butyl acetate=1)
solubility in water: insoluble
appearance and odor: off-white soild; slight odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: silicon dioxide
Waste disposal methods: disposal should be made in accordance with
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethyl siloxane, silica filled
fraction by wt:
other rec limits: none recommended
ingred name: the manufacturer states that no hazardous ingredients are
present in this product.
rtecs #: 9999999zz
fraction by wt: 100%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin-contact with the skin is not
expected to cause irritation. Eye-contact with the eyes may cause
temporary irritation.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: ingestion-if ingested, do not induce vomiting. Prompt medical
attention. Skin-contact with skin is not expected to cause
irritation. wash contacted areas with soap and water. Eyes-flush
eyes with cop ious amounts of water for a minimum of 15 minutes. If
irritation develops contact a physician.
Hcc: v7
boiling pt: b.P. Text: >572f,>300c
vapor pres:
vapor density: >1
spec gravity: 1.02
ph: 7
solubility in water: insoluble
appearance and odor: translucent, paste. Slight, sweet odor.
Stability indicator/materials to avoid: yes
strong acids or bases, strong oxidizing materials.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon dioxide, carbon monoxide,
silicon dioxide.
Waste disposal methods: dispose of in accordance with all applicable
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 85-95%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5-15%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: primary route: eyes. temporary eye irritation
signs and symptions of overexposure: temporary eye irritation
medical cond aggravated by exposure: none known.
first aid: ingestion: do not induce vomiting. Keep individual calm. Obtain
medical attention. Inhalation: does not apply. Skin: wash with soap &
water. Eye: flush eyes with water for at least 15 minutes. Irritat ion is
transient. If it persists, obtain medical attention.
hcc: v5
b.P. Text: not available
vapor pres: not available
spec gravity: 1.03
ph: not established
evaporation rate & reference: not available
solubility in water: > 1%
appearance and odor: translucent-light white paste. Little or no odor.
product id: 60089, 5 oz v724 elect insul sili cpd
cage: to876
assigned ind: y
company name: loctite corporation
street: 705 north mountain road
city: newington ct
zipcode: 06111
health emergency phone: 203-278-1280
label required ind: y
date of label review: 07/31/2000
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: none
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: to876
trans id no: 154270
product id: 60089, 5 oz v724 elect insul sili cpd
msds prepared date: 11/16/1993
review date: 07/31/2000
mfn: 1
net unit weight: 10 lbs
multiple kit number: 0
unit of issue: cn
container qty: 1
type of container: can
=======================================================
disclaimer (provided with this information by the compiling agencies): this
information is formulated for use by elements of the department of defense.
the united states of america in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the department of defense
nor any person or persons contracting with any instrumentality of the united
states of america and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
united states of america should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding department
of defense or other government situation.
spill release procedures: scrape up bulk-remove film with inert absorbent
&/or hydrophobic solvent. If solvent is used, observe all handling
procedures for solvent.
waste disposal methods: incinerate following epa and local regulations
handling and storage precautions: storage: for best performance store below 90
deg f, in a closed container. Handling: avoid prolonged skin contact. Keeep
away from eyes. Be neat-can cause sloppery conditions.
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: contact with eyes may cause
redness. Skin: contact with skin causes no known irritation.
explanation of carcinogenicity: none
effects of overexposure: eyes: contact with eyes may cause redness.
medical cond aggravated by exposure: not provided
First aid: eyes: contact with eyes may cause redness. Flush eyes with
copious amounts of water for 15 minutes. If irritation persists
contact a physician. Skin: contact with skin causes no known
irritation. Wash contacted areas with soap and water. Ingestion:
if ingested seek prompt medical attention. Do not induce vomiting.
Hcc: v5
nrc/state lic num: not relevant
boiling pt: >300.C, 572.F
melt/freeze pt: m.P/f.P text: not provided
decomp temp: decomp text: not provided
vapor pres:
vapor density: >1
spec gravity: >1.0
voc pounds/gallon: 1
evaporation rate & reference: not provided
solubility in water: insoluble
appearance and odor: translucent paste
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong acids and oxidizing materials
stability condition to avoid: not provided
hazardous decomposition products: carbon dioxide, carbon monoxide,
silicon dioxide
Waste disposal methods: dispose of in accordance with federal, state and
local regulations.
Ingred name: dimethyl polysiloxane
cas: 63148-62-9
rtecs #: jt6484500
minumum % wt: 75.
maxumum % wt: 95.
other rec limits: not provided
osha pel: not provided
acgih tlv: not provided
ingred name: silica, amorphous
cas: 112945-52-5
rtecs #: vv7310000
minumum % wt: 5.
maxumum % wt: 25.
other rec limits: not provided
osha pel: not provided
acgih tlv: not provided