Worldwide distributor of NSN parts and consumables located in the USA.
A chemical product specially prepared to increase the absorption capacity of the basic chemica (s) for the removal of moisture and capable of being restored to approximately its original condition.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $167.59 to $279.32.. | |
Does NSN 6850-00-463-3813 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Canada | |
What is the NIIN of NSN 6850-00-463-3813? | |
004633813 or 00-463-3813 | |
Does NSN 6850-00-463-3813 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 6850-00-463-3813? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Aug 17, 1970 |
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye, skin & respiratory tract
irritation. Chronic: the drying action of this material can cause
irritation of the mucous membranes of the nose and throat and
irritation of the skin. Avoid prolo nged breathing of the dust
which may cause lung damage.
explanation of carcinogenicity: this product and its components are not
listed on the iarc, ntp or osha carcinogens lists.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory or fibrotic pulmonary disease.
First aid: eyes: immediately flush eyes with large amounts of water for
at least 15 minutes, occasionally lifting the upper & lower eye
lids. If irritation occurs and persists, seek medical attention.
skin: wash with soap and water. Ingestion: if ingested in large
quantities, then drink 2 glasses of water. Induce vomiting if the
patient is conscious. Inhalation: remove person to fresh air.
Hcc: v7
spec gravity: 1.1
appearance and odor: tan pellet or bead; odorless
Stability indicator/materials to avoid: yes
sudden contact with high concentrations of chemicals having high heats
of adsorption such as olefins, hydrogen chloride.
stability condition to avoid: the addition of moisture without flooding
can cause rise in temperature from heat of adsorption.
hazardous decomposition products: decomposition products from
hydrocarbons & other materials that are retained on the molecular
sieve during normal use.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium oxide
cas: 1305-78-8
rtecs #: ew3100000
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 2 mg/m3; 9192
ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none specified
ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none specified
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt:
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye, skin & respiratory tract
irritation. Chronic: the drying action of this material can cause
irritation of the mucous membranes of the nose and throat and
irritation of the skin. Avoid prolo nged breathing of the dust
which may cause lung damage.
explanation of carcinogenicity: this product and its components are not
listed on the iarc, ntp or osha carcinogens lists.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory or fibrotic pulmonary disease.
First aid: eyes: immediately flush eyes with large amounts of water for
at least 15 minutes, occasionally lifting the upper & lower eye
lids. If irritation occurs and persists, seek medical attention.
skin: wash with soap and water. Ingestion: if ingested in large
quantities, then drink 2 glasses of water. Induce vomiting if the
patient is conscious. Inhalation: remove person to fresh air.
Hcc: v7
spec gravity: 1.1
appearance and odor: tan pellet or bead; odorless
Stability indicator/materials to avoid: yes
sudden contact with high concentrations of chemicals having high heats
of adsorption such as olefins, hydrogen chloride.
stability condition to avoid: the addition of moisture without flooding
can cause rise in temperature from heat of adsorption.
hazardous decomposition products: decomposition products from
hydrocarbons & other materials that are retained on the molecular
sieve during normal use.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium oxide
cas: 1305-78-8
rtecs #: ew3100000
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 2 mg/m3; 9192
ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none specified
ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none specified
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt:
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye, skin & respiratory tract
irritation. Chronic: the drying action of this material can cause
irritation of the mucous membranes of the nose and throat and
irritation of the skin. Avoid prolo nged breathing of the dust
which may cause lung damage.
explanation of carcinogenicity: this product and its components are not
listed on the iarc, ntp or osha carcinogens lists.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory or fibrotic pulmonary disease.
First aid: eyes: immediately flush eyes with large amounts of water for
at least 15 minutes, occasionally lifting the upper & lower eye
lids. If irritation occurs and persists, seek medical attention.
skin: wash with soap and water. Ingestion: if ingested in large
quantities, then drink 2 glasses of water. Induce vomiting if the
patient is conscious. Inhalation: remove person to fresh air.
Hcc: v7
spec gravity: 1.1
appearance and odor: tan pellet or bead; odorless
Stability indicator/materials to avoid: yes
sudden contact with high concentrations of chemicals having high heats
of adsorption such as olefins, hydrogen chloride.
stability condition to avoid: the addition of moisture without flooding
can cause rise in temperature from heat of adsorption.
hazardous decomposition products: decomposition products from
hydrocarbons & other materials that are retained on the molecular
sieve during normal use.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none specified
ingred name: calcium oxide
cas: 1305-78-8
rtecs #: ew3100000
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 2 mg/m3; 9192
ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none specified
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3;tdust; 9293
ingred name: iron oxide
cas: 1309-37-1
rtecs #: no7400000
fraction by wt:
other rec limits: none specified
osha pel: 10 mg/m3 (fe)
acgih tlv: 5 mg/m3(fe),b2; 9293
ingred name: potassium oxide
cas: 12136-45-7
rtecs #: tt3790000
other rec limits: none specified
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt:
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: acute- eyes: may cause irritation &
redness. Skin: may cause irritation, redness and/or burns.
inhalation: may cause nose & throat irritation & chest discomfort.
ingestion: may burn mouth & throat as it g ets hot when adsorb
water. Chronic- prolonged inhalation may cause lung damage.
explanation of carcinogenicity: contains quartz.
effects of overexposure: eye, skin, respiratory tract irritation, cough,
redness and/or burns of eyes and skin
medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory or fibrotic pulmonary disease.
First aid: get medical care if symptoms persist. Eyes: immediately flush
with water for 15 minutes, holding eyelids open. Skin: wash with
soap & water. Inhaled: remove to fresh air. Swallowed: if large
quantities in gested, drink 2 glasses of water. Contact physician
for permission to induce vomiting. Note to physican: desiccant
generates heat as it absorbs water. Used product can contain
hazardous chemicals.
Hcc: v7
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: not known
spec gravity: 1.1
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: tan bead, odorless
Stability indicator/materials to avoid: yes
sudden contact with high concentrations of chemicals having high heats
of adsorption such as olefins, hcl, etc..
stability condition to avoid: addition of moisture (water) without
flooding can cause rise in temperature and contact with skin might
result in burns.
hazardous decomposition products: decomposition products of hydrocarbons
which were retained on the sieve, oxides of sodium,
Waste disposal methods: discard any product (including any retained
materials of use), disposable containers or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none recommended
ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica gel/silicon oxide
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3.
acgih tlv: 10 mg/m3.
ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt:
other rec limits: none recommended
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293