Worldwide distributor of NSN parts and consumables located in the USA.
An electrically charged substance, used in copy processing, which acts as a carrier for the toner in recording the image on a selenium drum. Excludes developing solution, direct electrostatic process; and developer, photographic.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Parts & accessories of copying machines
Parts and accessories for other office machines, printer, copying and facsimile machines whether or not combined
Business machines and equipment
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $333.80 to $556.34.. | |
Does NSN 6850-01-111-3030 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, National Security Agency, U.s. Marine Corps, Department Of The Navy, and National Aeronautics and Space Administration | |
What is the NIIN of NSN 6850-01-111-3030? | |
011113030 or 01-111-3030 | |
Does NSN 6850-01-111-3030 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 6850-01-111-3030? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Apr 14, 1981 |
Effects of overexposure: irr.Of eyes & resp. Tract may occur in heavy
dusty conditions.
First aid: skin: wash with soap and water. Eyes: flush with water.
inhaled: remove to fresh air. Remove contaminated
clothing.Ing: drink water.See doctor.
Hcc: n1
solubility in water: insoluble
appearance and odor: black powder-faint odor
Stability indicator/materials to avoid: yes
none
stability condition to avoid: open flames
hazardous decomposition products: tox. Decomp. Prod. Formed on
combustion.
Waste disposal methods: dispose of iaw local,state & federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: ferrite powder(in carrier)
fraction by wt: >90%
ingred name: styrene acrylic copolymer(in carrier)
fraction by wt:
ingred name: styrene acrylic copolymer(in toner)
fraction by wt:
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
Effects of overexposure: none noted by manufacturer: low toxicity and
low hazard tohealth (per mfg)
First aid: inhale: remove to fresh air,give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse
mouth,call physcian(use standard low toxicity chemical first aid)
Hcc: n1
spec gravity: 2.6
solubility in water: negligible
appearance and odor: black granular powder,essentially odorless.
Stability indicator/materials to avoid: yes
none noted
stability condition to avoid: avoid excess heat
hazardous decomposition products: co*2,co,unknown organic compounds
Waste disposal methods: keep in covered containers pending disposal.
handle and dispose in full compliance with all applic able
international,federal,state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solids,hazard unknown,unidentified ingredients.
fraction by wt: 100%
Ld50 lc50 mixture: oral ld50 (rat) is >15,380 mg/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: acute-eye/skin: not
irritant.Inhalation: minimal irritation may
occur.Ingestion: practically non-toxic.Chronic-inhalation: may cause
lung fibrosis in rats.
explanation of carcinogenicity: contains nickel
effects of overexposure: see health hazards section.
medical cond aggravated by exposure: none when used as described by
product literature.
First aid: -eyes: wash with water.Skin: wash with soap and
water.Inhalation: remove from exposure.Ingestion: dilute stomach
contents with several glasses of water.
Hcc: n1
spec gravity: 5
appearance and odor: black granular/faint odor
Stability indicator/materials to avoid: yes
none
stability condition to avoid: high heat, open flames
hazardous decomposition products: products of combustion may be toxic.
avoid breathing smoke.
Waste disposal methods: no specific waste disposal method required.
dispose of in accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: iron
cas: 7439-89-6
rtecs #: no4565500
fraction by wt: >70%
other rec limits: none specified
ingred name: zinc (sara iii)
cas: 7440-66-6
rtecs #: zg8600000
fraction by wt: 15 - 20%
other rec limits: none specified
osha pel: 10 mg zno/m3
acgih tlv: 10 mg zno/m3; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: nickel (sara iii)
cas: 7440-02-0
rtecs #: qr5950000
fraction by wt: 5 - 10%
other rec limits: none specified
osha pel: 1 mg/m3
acgih tlv: 1 mg/m3; 9192
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: note: pertains to finished prod.Eye: may
cause irrit.Skin: repeated contact may cause irrit.May cause
allergic rx.Inhal: dust inhal could cause resp irrit above tlv but
considered low haz.Ingest: may cause irrit muc membr or gi
tract.Carbon black tested for mutagenicity on species s.
typhimurium w/negative results.
explanation of carcinogenicity: per
msds: carcinogenicity: ntp/iarc/osha: no.
effects of overexposure: eye irrit, skin irrit, allergic skin reaction,
respiratory irrit, mucous membrane or digestive tract irrit.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: applies to finished product. Eye: immed flush w/plenty of
running water for 15mins.Obtain med attn. Skin: flush affected areas
promptly w/water for 15mins.Remove contamin cloth.In case of contd
irrit co nsult physician. Inhal: for overexposureremove to fresh
air. Ingest: drink several glasses of water.
Hcc: n1
boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: np
vapor pres: na
vapor density: na
spec gravity: 5.0
ph: na
viscosity: np
evaporation rate & reference: na
solubility in water: na
appearance and odor: black granular powder, slight odor.
percent volatiles by volume: na
corrosion rate: np
Stability indicator/materials to avoid: yes
avoid strong oxidizers.
stability condition to avoid: excessive heat or flame.
hazardous decomposition products: co2, carbon monoxide.
Waste disposal methods: according to 40cfr261 matl not haz waste when
discarded.However state/loc reqmts may be more restrictive-consult
w/proper state/lco authorities is advised.Chem present @level which
could require repor ting under sara title iii: mangenese cmpd
(supple)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carrier includes ingred 2,3
fraction by wt: >95%
other rec limits: none recommended
ingred name: nickel-zinc ferrite powder
cas: 12645-50-0
fraction by wt: >95%
other rec limits: none recommended
ingred name: styrene-acrylate polymer
cas: 25214-28-2
fraction by wt:
other rec limits: none recommended
ingred name: toner includes ingred 5,6.
fraction by wt:
other rec limits: none recommended
ingred name: styrene acrylate polymer
cas: 25213-39-2
fraction by wt: 80-90%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 10-20%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9596
Ld50 lc50 mixture: ld50 (oral, rat)=>15.38g/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not an eye irrit. Not a skin irrit nor
sensitizer. Minimal respiratory tract irritation may occur as with
expousre to large amounts of any non-toxic dust.
explanation of carcinogenicity: per msds no carcinogens present.
effects of overexposure: minimal resp tract irrit.
medical cond aggravated by exposure: none when used as described by
product literature.
First aid: eye: flush w/water. Skin: wash w/soap & water. Inhal: remove
from exposure. Ingest: dilute stomach contents w/several glasses of
water.
Hcc: n1
spec gravity: 5
appearance and odor: black granular/faint odor.
Stability indicator/materials to avoid: yes
none.
stability condition to avoid: avoid prolonged inhalation of excessive
dust.
hazardous decomposition products: products of combustion may be toxic.
avoid breathing smoke.
Waste disposal methods: when disposed this product is not haz waste
according to fed reg 40cfr261. However, state & local requirements
may be more restrctive. Therefore consultation w/appropriate state
& local waste disposal authorities is advised.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: developer consists of >99% carrier (ingred 2) and
(ingreds 3,4).
rtecs #: 9999999zz
other rec limits: none recommended
ingred name: ni-zn ferrite granules (contains toxic chem(s) subj to
reporting rqmts fo sec313 title iii of sara).
cas: 12645-50-0
other rec limits: none recommended
ingred name: styrene/acrylate polymer
cas: 25213-39-2
fraction by wt: 85-90%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 10-15%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9495