Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $585.14 to $975.24.. | |
Does NSN 6850-01-136-9025 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, and Department Of The Navy | |
What is the NIIN of NSN 6850-01-136-9025? | |
011369025 or 01-136-9025 | |
Does NSN 6850-01-136-9025 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 6850-01-136-9025? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Aug 17, 1982 |
Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: harmful if swallowed.Exposure is
unlikely to occur unless product is applied in a manner which
results in generation of mists or fumes,or when machining of the
cured product results in generation of d ust particles.
explanation of carcinogenicity: none
effects of overexposure: eyes: slight irritation upon direct
contact.Skin: possible irritation.Ingestion: harmful if
swallowed.Inhalation: inhalation of vapors at elevated temperatures
may cause irritation.
medical cond aggravated by exposure: no data availabale for this product
mixture.
First aid: eyes: flush with water for 15 minutes.Get medical attention if
irritation persists.Skin: remove contaminated clothing.Wash affected
area with water.Get medical attention if symptoms
persist.Ingestion: di lute with water.Get immediate medical
attention.Inhalation: remove to fresh air.Give oxygen if breathing
difficult;give artificial respiration if not breathing.Get
immediate medical attention.
Melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: see supp
vapor density: >1 (air=1)
spec gravity: 2.20 (water=1)
solubility in water: negligible
appearance and odor: white paste.Odor threshold has not been
established.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: exposure to heat/open flame,uncontrolled
mixing with or exposure to incompatible substances.
hazardous decomposition products: carbon monoxide,carbon dioxide,silicon
dioxide and zinc oxide.
conditions to avoid polymerization: avoid exposure to heat/open
flame,uncontrolled mixing with or exposure incompatible substances.
Waste disposal methods: disposal must be iaw fed,state,& local
regs.Coordination w/ supporting installation/macom environmental
coordination prior to disposal is rec to determ appropriate disp
methods .Spilled material & water rinses are classified as
chemical waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 60-80%
other rec limits: n/k
osha pel: 15mg/m3 tdust/5 fume
acgih tlv: 10mg/m3 tdust; 9293
ingred name: silicone resin
cas: 63148-62-9
rtecs #: jt6484500
fraction by wt: 20-40%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: ld50 (oral, mouse) 7950 mg/kg.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin. Acute-
eyes/skin: may cause slight irritation. Inhale: not likely to occur.
oral: practically non-toxic. Chronic- unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation, discomfort, tearing, dryness of
eyes, redness
medical cond aggravated by exposure: may enhance allergic conditions.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: if conscious, drink 1-2 glasses
of wate r. Get medical attention. Never give anything by mouth to
an unconscious person. Do not leave victim unattended.
Hcc: n1
nrc/state lic num: not relevant
decomp temp: decomp text: 302f,150c
spec gravity: 2.43
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: white paste-like solid; odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids, strong bases
stability condition to avoid: excessive heat (150c/302f)
hazardous decomposition products: formaldehyde, dimethylcyclosiloxanes,
methylphenylcyclosiloxanes
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide (sara 313) (cercla)
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 70 - 75%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 25 - 30%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, mouse) 7950 mg/kg.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: none specified by
manufacturer. Acute- eyes/skin: may cause slight irritation.
inhale: not likely to occur. Ingestedl: practically non-toxic.
chronic- unknown.
explanation of carcinogenicity: this product does not contain any
ingredient designated by iacr, ntp, acgih or osha as a probable or
suspected human carcinogen.
effects of overexposure: eyes-redness, irritation. Skin-redness,
irritation. Ingestion-practically non-toxic. Inhalation-ingestion.
not likely.
medical cond aggravated by exposure: no specific information found.
First aid: inhaled: remove to fresh air. Eyes: flush with water for 15
minutes, holding eyelids open. Get medical help if symptoms
persist. Skin: wash with soap & water. Ingested: if conscious, drink
1-2 glasses of water. Get medical attention. Never give anything
by mouth to an unconscious person. Do not leave victim unattended.
Hcc: n1
decomp temp: =150.C, 302.F
spec gravity: 2.43
solubility in water: insoluble
appearance and odor: white paste-like solid; odorless.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids, strong bases
stability condition to avoid: excessive heat open flame, spark,
combustible materials.
hazardous decomposition products: formaldehyde, dimethylcyclosiloxanes,
methylphenylcyclosiloxanes.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.
Ingred name: zinc oxide (sara 313) (cercla)
cas: 1314-13-2
rtecs #: zh4810000
minumum % wt: 70.
maxumum % wt: 75.
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
minumum % wt: 25.
maxumum % wt: 30.
other rec limits: none recommended