NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A positive charged powder, or a liquid, which develops the paper prior to the fusing action.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Chemical preparation for photographic uses & unmixed products for photographic uses, measured/retail sale, ready for use, except sensitizes emulsions
Chemicals prepared for photographic use (except varnish, glue, etc.); unmixed products for photo use in measured portions or ready to use retail packs
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $63.22 to $105.37.. | |
| Does NSN 6850-01-186-0351 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Navy, and Spain | |
| What is the NIIN of NSN 6850-01-186-0351? | |
| 011860351 or 01-186-0351 | |
| Does NSN 6850-01-186-0351 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-186-0351? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 06, 1984 | |
Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.
First aid: remove to fresh air. Give cpr/oxygen if need. Skin: wash with
soap & water. Eyes: flush with water 15 min. Keep warm and quiet
!
Hcc: n1
spec gravity: 1.185
solubility in water: negligible
appearance and odor: fine,black powder,practically odorless.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: not known
hazardous decomposition products: may emit co, co*2 when heated to
decompose
Waste disposal methods: incinerate in approved incinerator or dispose of
in approved chemical dump in accordance with local,state & federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 03.0%
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
ingred name: cupric oxide
fraction by wt: 05.9%
ingred name: styrene-acrylic resin
fraction by wt: 84.7%
acgih tlv: 35mg/cum(permfr
ingred name: olefin
fraction by wt: 02.1%
ingred name: dyes
fraction by wt: 04.3%
Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.
First aid: remove to fresh air. Give cpr/oxygen if need. Skin: wash with
soap & water. Eyes: flush with water 15 min. Keep warm and quiet
!
Hcc: n1
spec gravity: 2.255
solubility in water: negligible
appearance and odor: fine,black powder,practically odorless.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: not known
hazardous decomposition products: may emit co, co*2 when heated to
decompose
Waste disposal methods: incinerate in approved incinerator or dispose of
in approved chemical dump in accordance with local,state & federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 01.6%
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
ingred name: cupric oxide
fraction by wt: 00.2%
ingred name: styrene-acrylic resin
fraction by wt: 35.1%
acgih tlv: 35mg/cum(permfr
ingred name: magnetite
fraction by wt: 63.1%
Ld50 lc50 mixture: ld50 (oral rat) is 5g/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: practically non-toxic and
non-irritating. Inhalation of toner powder at higher levels a
slight degree of lung fibrosis was observed due to excessive amount
of dust retained in the lungs for a prolonge d interval.
explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: minimal respiratory tract irritation may occur
as with exposure to large amounts of any non-toxic dust. May cause
cough and raise phlegm. See acute and chronic health hazards for
chronic effects.
medical cond aggravated by exposure: same as normal dust, may cough and
raise the phlegm by the inhalation.
First aid: eyes: immediately flush with plenty of water for at least 15
minutes. See md. Skin: rinse with water for at least 15 minutes.
remove any contaminated clothing. If irritation develops seek
medical aid. ingestion: if swallowed, give water todilute. Call
physician or poison control center. Inhalation: if inhaled, remove
to fresh air. Give cpr if needed or call medical help.
Hcc: n1
spec gravity: 1.2
solubility in water: negligible
appearance and odor: black-powder/faint odor
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: do not burn. Avoid breathing of smoke.
Waste disposal methods: no special techniques beyond normal practice.
ensure conformity with federal, state, and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene methacrylate copolymer
fraction by wt: >80%
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 1 - 5%
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
ingred name: organic pigment (manolta furnished no other info.)
fraction by wt: 1 - 5%
ingred name: copper oxide (man. Furnished no other info.)
fraction by wt: 5 - 10%
ingred name: polypropylene
fraction by wt: 1 - 3%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: mechanical eye irritation.
minimal irritation to respiratory tract may occur as with exposure
to any non-toxic dust.
effects of overexposure: eyes: mechanical irritation. Inhalation:
irritation of nose, throat, and upper respiratory system
irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with plenty of water. Inhalation: remove to fresh
air. If discomfort persists, see doctor.
Hcc: n1
melt/freeze pt: m.P/f.P text: >302f,>150c
spec gravity: 1.20
solubility in water: negligible
appearance and odor: fine black powder. Odorless.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames.
hazardous decomposition products: carbon monoxide, carbon dioxide,
nitrogen oxides.
Waste disposal methods: notify your local environmental officer. Keep in
covered containers pending disposal. Dispose of in accordance with
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5.0%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9293
ingred name: styrene acrylate copolymer
cas: 27136-15-8
fraction by wt: 17.5%
other rec limits: none recommended
ingred name: styrene acrylate copolymer
cas: 25767-47-9
fraction by wt: 67.0%
other rec limits: none recommended
ingred name: polypropylene
cas: 9003-07-4
rtecs #: ud1842000
fraction by wt: 2.5%
other rec limits: none recommended
ingred name: organic pigment (solvent black 7)
cas: 8005-02-5
fraction by wt: 3.5%
other rec limits: none recommended
ingred name: copper oxide (cuo)
cas: 1317-38-0
rtecs #: gl7900000
fraction by wt: 4.5%
other rec limits: none recommended
osha pel: 1 mg/m3 (cu dust)
acgih tlv: 1 mg/m3 (cu dust)