NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An electrically charged substance, used in copy processing, which acts as a carrier for the toner in recording the image on a selenium drum. Excludes developing solution, direct electrostatic process; and developer, photographic.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Parts & accessories of copying machines
Parts and accessories for other office machines, printer, copying and facsimile machines whether or not combined
Business machines and equipment
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
101715 - Developer, copy machine toner
734 - Office machines (typewriters, adding machines, etc)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
S - 60.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $775.29 to $1,292.15.. | |
| Does NSN 6850-01-207-3906 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, and Department Of The Navy | |
| What is the NIIN of NSN 6850-01-207-3906? | |
| 012073906 or 01-207-3906 | |
| Does NSN 6850-01-207-3906 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-207-3906? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| May 01, 1985 | |
Ld50 lc50 mixture: oral rat ld50 is not known
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: low inhalation hazard for recommended
handling. Finely divided solid. Avoid breathing the dust. May cause
transient eye irritation. Low skin hazard for recommended handling.
expected to be a low inges tion hazard.
explanation of carcinogenicity: product contains no ingredient listed by
iarc, ntp or osha as a carcinogen. Mutagenicity tests were
negative.
effects of overexposure: eye: physical irritation. Skin: possible
irritation. Inhalation: respiratory irritation with exposure to
large amounts of dust. Ingested: none reported.
medical cond aggravated by exposure: none reported
First aid: eye: flush w/water 15 min, hold lids open. Skin: wash with soap
& water. Remove contaminated clothing and launder before reuse.
inhaled: remove to fresh air. Restore breathing if necessary.
ingested: do n ot induce vomiting. Give 2 large glasses of milk or
water and get immediate medical care. Give nothing by mouth if
unconscious. If irritation persists or is severe,see a doctor.
Hcc: n1
melt/freeze pt: m.P/f.P text: 140f,60c
vapor pres: negligible
spec gravity: 2.3
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: black, finely ground powder, slight plastic odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none given by manufacturer.
hazardous decomposition products: carbon dioxide, carbon monoxide
Waste disposal methods: dispose i/a/w all federal, state and local
regulations. Mfr suggests that disposal be by incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: iron
cas: 7439-89-6
rtecs #: no4565500
fraction by wt: 95-99%
ingred name: styrene methylmethacrylates copolymer
cas: 63149-52-0
fraction by wt: 1-5%
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes. Acute- eyes: no
specific hazard known. May cause transient irritation. Skin: low
hazard for recommended handling. Inhale: expected to be a low hazard
for recommended handling. Oral: ex pected to be a low ingestion
hazard. Overexposure to carbon dust may cause respiratory
irritation. Chronic- unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation
medical cond aggravated by exposure: persons with pre-existing eye
problems or impaired respiratory function may be more susceptible
to the effects of this product.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: drink 1-2 glasses of water. Seek
medica l attention.
Hcc: n1
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: 140f,60c
vapor pres: negligible
spec gravity: 2.3
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: negligible
appearance and odor: black powder - slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: dust formation
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of iron
Waste disposal methods: discharge, treatment or disposal may be subject
to federal, state or local regulations. Incinerate or landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: iron
cas: 7439-89-6
rtecs #: no4565500
fraction by wt: 95 -99%
other rec limits: none recommended
osha pel: 10 mg/m3 (tdust)
acgih tlv: 5 mg/m3 (oxide fume)
ingred name: styrene butylacrylate copolymer
cas: 67338-64-1
fraction by wt: 1 - 5%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9596
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes. Inhalation:
expected to be a low hazard for recommended handling. eyes: no
specific hazard known. may cause transient irritation. skin:
expected to be a low hazard for recomm ended handling. ingestion:
expected to be a low ingestion hazard. overexposure to carbon
black dust may result in irritation of the respiratory tract and
benigh deposition of carbon black in the lun g.
explanation of carcinogenicity: none.
effects of overexposure: irritation.
medical cond aggravated by exposure: persons with pre-existing eye
problems or impaired respiratory function may be more susceptible
to the effects of this product.
First aid: inhalation: if symptomatic, move to fresh air. get medical
attention if symptoms persist. eyes: any material that contacts
the eye should be washed out immediately with water. get medical
attention if symptoms occur. skin: wash with soap and water. get
medical attention if symptoms occur. ingestion: drink 1-2 glasses
of water. seek medical attention. Never give anything by mouth to
an unco nscious person.
Hcc: n1
nrc/state lic num: not relevant
vapor pres: negligible
vapor density: negligible
solubility in water: negligible
appearance and odor: black power with sligh odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
conditions to avoid polymerization: will not occur.
Waste disposal methods: incinerate or landfill. Can be incinerated when
in compliance with local regulations. discharge, treatment, or
disposal may be subject to national, state, or local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: iron
cas: 7439-89-6
rtecs #: no4565500
minumum % wt: 95.
maxumum % wt: 99.
other rec limits: none recommended
osha pel: 10 mg/m3 (tdust)
acgih tlv: 5 mg/m3 (oxide fume)
ingred name: acrylic acid butyl ester polymer with styrene/styrene
butylacrylate copolymer
cas: 25767-47-9
minumum % wt: 1.
maxumum % wt: 5.
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9596
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eyes: no specific hazard known.
may cause transient irritation. Skin: low hazard for recommended
handling. Inhalation: expected to be a low hazard for recommended
handling. Oral: expected to be a l ow ingestion hazard. Chronic-
unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation-if symptomatic, move to fresh air. Treat
symptomatically. Get medical attention if symptoms persists.
eyes-any material that contacts the eyes should be washed out
immediately with water. G et medical attention if symptoms
occur.Skin-wash with soap & water. Get medical attention if
symptoms occur. Ingestion-drink 1-2 glasses of water. Seek medical
attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 149f,65c
vapor pres: negligible
spec gravity: 0.9
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: negligible
appearance and odor: black, solid (powder), slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: dust formation
hazardous decomposition products: carbon monoxide, carbon dioxide, and
oxides of nitrogen, oxides of sulfur.
Waste disposal methods: discharge, treatment or disposal may be subject
to federal, state or local regulations. Can be incinerated when in
compliance with local regulations. Contract with a licensed
chemical disposal agency.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polymer acrylic copolymer; polymerized fatty acid amide
cas: 68650-54-4
fraction by wt: 65-70%
other rec limits: none recommended
ingred name: polymer styrene copolymer; maleated resin
cas: 25119-62-4
fraction by wt: 15-20%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
fraction by wt: 10-15%
other rec limits: none recommended
effects of exposure: eye contact: mild eye irritation: signs/symptoms can
include redness, swelling, pain, and tearing. vapors from heated material
may cause eye irritation. dust created by cutting, grinding, sanding, or
machining may cause eye irritation. Skin contact: allergic skin reaction:
signs/symptoms can include redness, swelling, blistering , and itching. may
be absorbed throught the skin and produce e ffects similar to those caused by
inhalation and/or ingestion.*
signs and symptions of overexposure: *inhalation: irritation ( upper
respiratory ): signs/symptoms can include soreness of the nose and throat,
coughing and sneezing. vapors of heated material may cause respiratory
system irritation. dust from cutting, grinding, sanding or machining may
cause irritation of the respiratory system. if swallowed: ingestion may
cause: irritation of gastrointestinal tissues: signs/symptoms can inc lude
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and blood in
feces. **
first aid: eye contact: immediately flush eyes with large amounts of water.
get immediate medical attention. skin contact: immediately wash skin with
soap and large amounts of water. remove contaminated clo thing. if
signs/symptoms occur, call a physician. wash contaminated clothing before
reuse and dispose of contaminated shoes. inhalation: if signs/symptoms
occur, remove person to fresh air. if si gns/symptoms continue, call a
physician. if swallowed: do not induce vomiting. drink two glasses of
water. call physician.
spec gravity: 1.150 water=1
viscosity: 8000.0-15000.0 cps
solubility in water: not solluable
appearance and odor: medium syrup, dark amber, strong mercaptan odor
percent volatiles by volume: 0.00% by wt.
product id: scotch-weld (tm) dp-100 ns (part a) translucent epoxy adhesi
cage: 04963
company name: 3m minnesota mining and mfg co adhesives sealers div
street: 3m ctr
city: saint paul mn
zipcode: 55144-1000
health emergency phone: 612-733-1110
label required ind: y
date of label review: 04/06/2001
status code: a
origination code: g
hazard and precautions: eye contact: mild eye irritation: signs/symptoms can
include redness, swelling, pain, and tearing. vapors from heated material
may cause eye irritation. dust created by cutting, grinding, sanding, or
machining may cause eye irritation. Skin contact: allergic skin reaction:
signs/symptoms can include redness, swelling, blistering , and itching. may
be absorbed throught the skin and produce e ffects similar to those caused by
inhalation and/or ingestion.*
=======================================================
responsible party cage: 04963
trans id no: 156580
product id: scotch-weld (tm) dp-100 ns (part a) translucent epoxy adhesi
msds prepared date: 12/02/1993
review date: 09/08/1999
mfn: 1
multiple kit number: 0
unit of issue: bx
container qty: 1
type of container: unknown
=======================================================
stability indicator: yes
materials to avoid: strong oxidizing agents heat heat is generated during cure.
hazardous decomposition products: carbon monoxide and carbon dioxide oxides of
nitrogen oxides of sulfur aldehydes ketones hydrocarbons toxic vapors, gases
or particulates.
hazardous polymerization indicator: no
spill release procedures: refer to other sections of this msds for information
regarding physical and health hazards, respiratory protection, ventilation,
and personal protective equipment. Call ( 612 ) 733-1110 or ( 612) 733- 6100
for 24-hour spill assistance. cover with absorbent material. collect
spilled material. place in a u.S. Dot-approved container and seal.
waste disposal methods: cure product according to product instructions.
incinerate uncured waste in an industrial or commerial incinerator. Dispose
of completely cured ( or polymerized ) material in a sanitary landfill.
environmental data: not determined. regulatory information: u.S. Epa
handling and storage precautions: store away from heat. keep out of the reach
of children.
effects of exposure: eye contact: mild eye irritation: signs/symptoms can
include redness, swelling, pain, and tearing. vapors from heated material
may cause eye irritation. dust created by cutting, grinding, sanding, or
machining may cause eye irritation. Skin contact: allergic skin reaction:
signs/symptoms can include redness, swelling, blistering , and itching. may
be absorbed throught the skin and produce e ffects similar to those caused by
inhalation and/or ingestion.*
signs and symptions of overexposure: *inhalation: irritation ( upper
respiratory ): signs/symptoms can include soreness of the nose and throat,
coughing and sneezing. vapors of heated material may cause respiratory
system irritation. dust from cutting, grinding, sanding or machining may
cause irritation of the respiratory system. if swallowed: ingestion may
cause: irritation of gastrointestinal tissues: signs/symptoms can inc lude
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and blood in
feces. **
first aid: eye contact: immediately flush eyes with large amounts of water.
get immediate medical attention. skin contact: immediately wash skin with
soap and large amounts of water. remove contaminated clo thing. if
signs/symptoms occur, call a physician. wash contaminated clothing before
reuse and dispose of contaminated shoes. inhalation: if signs/symptoms
occur, remove person to fresh air. if si gns/symptoms continue, call a
physician. if swallowed: do not induce vomiting. drink two glasses of
water. call physician.
spec gravity: 1.170 water = 1
viscosity: 10000.0-3000.0 cps
solubility in water: not solluable
appearance and odor: medium syrup, light straw colored, epoxy odor
percent volatiles by volume: 0.00% by wt.
product id: scoth-weld (tm) dp-100 ns (part b) translucent epoxy adhesiv
cage: 04963
company name: 3m minnesota mining and mfg co adhesives sealers div
street: 3m ctr
city: saint paul mn
zipcode: 55144-1000
health emergency phone: 612-733-1110
label required ind: y
date of label review: 04/06/2001
status code: a
origination code: g
hazard and precautions: eye contact: mild eye irritation: signs/symptoms can
include redness, swelling, pain, and tearing. vapors from heated material
may cause eye irritation. dust created by cutting, grinding, sanding, or
machining may cause eye irritation. Skin contact: allergic skin reaction:
signs/symptoms can include redness, swelling, blistering , and itching. may
be absorbed throught the skin and produce e ffects similar to those caused by
inhalation and/or ingestion.*
=======================================================
responsible party cage: 04963
trans id no: 156581
product id: scoth-weld (tm) dp-100 ns (part b) translucent epoxy adhesiv
msds prepared date: 12/02/1993
review date: 09/08/1999
mfn: 2
multiple kit number: 0
unit of issue: bx
container qty: 1
type of container: unknown
=======================================================
stability indicator: yes
materials to avoid: strong oxidizing agents heat heat is generated during cure.
hazardous decomposition products: carbon monoxide and carbon dioxide oxides of
nitrogen oxides of sulfur aldehydes ketones hydrocarbons toxic vapors, gases
or particulates.
hazardous polymerization indicator: no
spill release procedures: refer to other sections of this msds for information
regarding physical and health hazards, respiratory protection, ventilation,
and personal protective equipment. Call ( 612 ) 733-1110 or ( 612) 733- 6100
for 24-hour spill assistance. cover with absorbent material. collect
spilled material. place in a u.S. Dot-approved container and seal.
waste disposal methods: cure product according to product instructions.
incinerate uncured waste in an industrial or commerial incinerator. Dispose
of completely cured ( or polymerized ) material in a sanitary landfill.
environmental data: not determined. regulatory information: u.S. Epa
handling and storage precautions: store away from heat. keep out of the reach
of children.