NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A positive charged powder, or a liquid, which develops the paper prior to the fusing action.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Chemical preparation for photographic uses & unmixed products for photographic uses, measured/retail sale, ready for use, except sensitizes emulsions
Chemicals prepared for photographic use (except varnish, glue, etc.); unmixed products for photo use in measured portions or ready to use retail packs
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACE4 - Toner cartridges
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi sub2
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
M - 85.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $517.02 to $861.71.. | |
| Does NSN 6850-01-210-5512 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, and Canada | |
| What is the NIIN of NSN 6850-01-210-5512? | |
| 012105512 or 01-210-5512 | |
| Does NSN 6850-01-210-5512 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-210-5512? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jun 14, 1985 | |
Ld50 lc50 mixture: not specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: minimal respiratory tract irritation
may occur as with exposure to large amounts of any non-toxic dust.
explanation of carcinogenicity: the ingredients in this product are not
listed on the latest ntp annual report, iarc monographs and osha
regulations.
effects of overexposure: possible eye irritation, minimal respiratory
tract irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of inhalation overexposure, remove from exposure. In
case of eye contact, flush with plenty of water. If irritation
persists, contact a physician. In case of skin contact, wash with
soap and w ater.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: negligible
vapor density: not given
spec gravity: 1.4 (water=1)
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: fine powder, slight plastic odor.
percent volatiles by volume: 0 %
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: combustion will produce carbon dioxide
and probably carbon monoxide.
Waste disposal methods: no special disposal technique required per
manufacturer. Ensure compliance with federal, state and/or local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acryl copolymer
fraction by wt: 55-60%
other rec limits: none specified
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 35-40%
other rec limits: none specified
ingred name: salicylic acid chelate
cas: 72869-85-3
fraction by wt: 1-5%
other rec limits: 0.5mg/cum (twa)
Ld50 lc50 mixture: tlv 10 mg/m3 tdust/5 mg/m3 respirable
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eye/skin: not irritant.
inhalation: minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust. Ingestion:
practically non-toxic. Chronic- no adverse effects.
effects of overexposure: minimal respiratory tract irritation may occur
as with exposure to large amounts of any non-toxic dust.
medical cond aggravated by exposure: respiratory ailments can be
aggravated by excessive exposure to the product dust.
First aid: get medical care if needed. Inhalation: remove to fresh air.
eyes: immediately flush with water for 15 minutes holding eyelids
open. Skin: wash with soap & water. Ingestion: dilute stomach
contents wi th several glasses of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >248f,>120c
spec gravity: 1.5 - 1.7
solubility in water: insoluble
appearance and odor: fine black powder, resin odor
Stability indicator/materials to avoid: yes
none
stability condition to avoid: excessive heat, flames, generating dust
hazardous decomposition products: may form carbon monoxide and carbon
dioxide
Waste disposal methods: do not incinerate. Disposal should be in
accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 40 - 50%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 25 - 45%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9293
Ld50 lc50 mixture: not given for product as a whole
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: excessive inhalation can cause
irritation to the respiratory tract.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: eye irritation, upper respiratory tract
irritation.
medical cond aggravated by exposure: pre-existing respiratory disorders
may be aggravated by exposure to this product.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing.
wash with soap and water. If irritation persists, get medical
attention. In halation: remove to fresh air. Restore breathing. Get
medical attention. Ingestion: rinse mouth with water. Get medical
attention.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: not given
spec gravity: 1.5-1.7
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: fine black powder, mild resinous odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid physical damage
hazardous decomposition products: possible carbon monoxide and carbon
dioxide during thermal decomposition.
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: < 5%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9394
ingred name: non-hazardous ingredients
fraction by wt: balance
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: expected to low hazard for
recommended handling for inhalation, skin contact and ingestion.
eye contact may cause transient irritation. Chronic: none specified
by manufacturer.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suepected carcinogen.
effects of overexposure: eyes: irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with lots of water for 15 minutes. Get medical
attention if symptoms occur. Skin-wash with soap & water. Get
medical attention if symptoms occur. Inhaled-remove to fresh air.
get medical at tention if symptoms persist. Ingested-if conscious,
drink 1-2 glasses. Seek medical attention.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: >212f,>100c
vapor pres: negligible
vapor density: not given
spec gravity: 1.4-1.6
solubility in water: negligible
appearance and odor: fine black powder, slight plastic odor.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide and carbon dioxide
Waste disposal methods: no special disposal technique required per
manufacturer. Ensure compliance with federal, state and/or local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acryl copolymer
fraction by wt: 55-65%
other rec limits: none specified
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 35-40%
other rec limits: none specified