NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $76.30 to $127.17.. | |
| Does NSN 6850-01-236-4275 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, Australia, France, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 6850-01-236-4275? | |
| 012364275 or 01-236-4275 | |
| Does NSN 6850-01-236-4275 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-236-4275? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jul 17, 1986 | |
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild irritation. Skin: mild
irritation. Inhalation: irritation of mucus membranes and
respiratory tract. Ingestion: none known. Chronic: respiratory
ailments, silicosis.
explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: mild eye & skin irritation.
medical cond aggravated by exposure: none known.
First aid: ingestion: do not induce vomiting. Get medical attention.
skin: wash with soap & water. Remove and launder contaminated
clothing. Eye: flush with plenty of water for atleast 15 minutes.
get medical at tention. Inhalation: remove to fresh air.
Hcc: v7
vapor pres: negligible
vapor density: negligible
spec gravity: 1.035
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: solid, off-white color, slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: silicon dioxide
Waste disposal methods: recycle or otherwise manage in a permitted waste
management facility in accordance with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimehtylsiloxane
cas: 63148-62-9
fraction by wt: 80-99%
other rec limits: none specified
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
fraction by wt: 5-10%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: trade secret components
fraction by wt: 5-10%
other rec limits: 10 mg/m3
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause slight (transient) skin or
eye irritation upon repeated or prolonged contact.
explanation of carcinogenicity: this product is not listed by iarc, ntp
or osha as a carcinogen, mutagen, teratogen or neurotoxin.
effects of overexposure: may cause slight (transient) skin or eye
irritation upon repeated or prolonged contact.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: immediately flush with running water for at least 15
minutes while holding eyelids open. If irritation develops or
persists, get medical attention. Skin: wash with soap and plenty of
water. If i rritation develops or persists, get medical attention.
vapor inhalation unlikely: remove to fresh air. Get medical
attention if required. Ingestion: immediately induce vomiting. Get
medical attention.
Hcc: n1
spec gravity: 1.0
viscosity: 220
solubility in water: negligible
appearance and odor: white translucent grease
percent volatiles by volume: 0
corrosion rate: 0
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong mineral acids, strong alkalis,
pressurized oxygen.
stability condition to avoid: open flames, electric arc, sources of
ignition and contact with pressurized oxygen.
hazardous decomposition products: none known
Waste disposal methods: consult local, state and federal authorities for
proper disposal procedures.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethyl siloxane
cas: 9016-00-6
rtecs #: tq2690000
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: exposure may cause skin & eye
irritation. No known oral hazard. An inhalation dust hazard may be
created under conditions where solid particles are separated from
the polymeric matrix. Chronic: no known hazards for prolonged
exposure to include carcinogens, teratgens, mutagens, reproductive
toxins.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: skin-irritation. Eyes-irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with lots of water for 15 minutes. See doctor if
irritation develops. Skin-wash with mild soap & water.
inhaled-remove to fresh air. Ingested-do not induce vomiting! If
conscious, slowly di lute with 1-2 glasses of water or milk.Seek
medical attention.
Hcc: v7
spec gravity: 1.02
solubility in water: insoluble
appearance and odor: paste; slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, formaldehyde.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in accordance with local, state and
federal environmental regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: trimethoxyboroxin
cas: 102-24-9
fraction by wt:
other rec limits: none recommended
ingred name: methylpolysiloxane or polydimethylsiloxane
cas: 63148-62-9
fraction by wt: 80-99%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5-15%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: exposure may cause skin & eye
irritation. No known oral hazard. An inhalation dust hazard may be
created under conditions where solid particles are separated from
the polymeric matrix. Chronic: no known hazards for prolonged
exposure including carcinogens, teratgens, mutagens, reproductive
toxins.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: skin-irritation. Eyes-irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with lots of water for 15 minutes. See doctor
ifchronic irritation develops. Skin-wash with mild soap & water.
inhaled-remove to fresh air. Ingested-do not induce vomiting! If
conscious, sl owly dilute with 1-2 glasses of water or milk. Never
give anything to unconscious peson. Seek medical attention.
Hcc: v7
spec gravity: 1.02
solubility in water: insoluble
appearance and odor: paste; slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, formaldehyde.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in accordance with local, state and
federal environmental regulations.
Ingred name: trimethoxyboroxin
cas: 102-24-9
fraction by wt:
other rec limits: none recommended
ingred name: methylpolysiloxane or polydimethylsiloxane
cas: 63148-62-9
fraction by wt: 80-99%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5-15%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3