NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An electrically charged chemical agent, used in copy processing, which transfers the image from the charged areas of a selenium drum to the recorder paper.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Chemical preparation for photographic uses & unmixed products for photographic uses, measured/retail sale, ready for use, except sensitizes emulsions
Chemicals prepared for photographic use (except varnish, glue, etc.); unmixed products for photo use in measured portions or ready to use retail packs
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACE4 - Toner cartridges
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi sub2
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
M - 85.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $123.28 to $205.47.. | |
| Does NSN 6850-01-261-6064 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, National Security Agency, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, Office Of The Secretary Of Transportation, U.s. Coast Guard, National Aeronautics and Space Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, Lithuania, Poland, Spain, Malaysia, Australia, Belgium, Canada, New Zealand, France, Germany, United Kingdom, Portugal, Italy, Norway, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 6850-01-261-6064? | |
| 012616064 or 01-261-6064 | |
| Does NSN 6850-01-261-6064 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-261-6064? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 16, 1987 | |
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: there are no known health hazards,
mutagenicity, carcinogenicity or teratogenicity.
effects of overexposure: minimal respiratory tract irritation may occur
as with exposure to large amounts of any non-toxic dust.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhale- remove from exposure to fresh air. Eye- open eye and
flush with plenty of water. Skin- wash with soap and water. Ingest-
drink several glasses of water. Call a physician.
Hcc: n1
melt/freeze pt: m.P/f.P text: 212f,100c
vapor pres: negligible
spec gravity: 1.4
evaporation rate & reference: negligible (butyl acet=1)
solubility in water: negligible
appearance and odor: fine powder with slight plastic odor
percent volatiles by volume: neglie
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: as with any other organic material,
decomposition will produce carbon dioxide and carbon monoxide.
Waste disposal methods: no special disposal technique required. Insure
compliance with federal, state and/or local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene-acrylic copolymer
cas: 25767-47-9
fraction by wt: 55-65%
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
ingred name: salicylic acid chelate
cas: 72869-85-3
fraction by wt: 1-3%
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of
eyes,skin,respiratory or g,i.Tract;redness or burns of eyes are
possible.
explanation of carcinogenicity: data per mgf msds.
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: pre-existing conditions may be
worsen.
First aid: eyes and skin: flush with large amount of water for about
15-20 minutes;seek medical attention immediately.Inhalation: remove
to fresh air;call a physician.Ingestion: seek medical attention
immediately.
Hcc: n1
vapor pres: negligible
spec gravity: 1.4
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: fine powder,slight,plastic odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat
hazardous decomposition products: co and co*2
Waste disposal methods: consult local authorities;disposal must be in
accordance with local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 35-40%
other rec limits: none specified
ingred name: styrene-acrylic copolymer
cas: 25767-47-9
fraction by wt: 55-60%
other rec limits: none specified
ingred name: salicylic acid chelate
cas: 72869-85-3
fraction by wt: 1-5%
other rec limits: none specified
Ld50 lc50 mixture: not specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner powder is not accessible until
the cartridge is forced to be broken. Acute: inhalation: toner is
finely divided solkid. Do not breathe the dust. Eye: no specific
hazard is known to manufacturer. however, any material that
contacts the eye may be irritating. Skin: low hazard for industrial
handling.
explanation of carcinogenicity: product contains no ingredients
currently classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: respiratory tract irritation, eye irritation
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation: remove to fresh air. Get medical attention. Eyes:
immediately flush with plenty of water for 15 minutes holding
eyelids open. Get medical attention if needed.
Hcc: n1
melt/freeze pt: m.P/f.P text: 212f,100c
vapor pres: negligible
vapor density: not given
spec gravity: 1.4 - 1.6
evaporation rate & reference: negl (butyl acetate = 1)
solubility in water: negligible
appearance and odor: fine powder with slight plastic odor.
percent volatiles by volume: neglig
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures and open flames.
hazardous decomposition products: combustion will produce carbon dioxide
and possibly toxic chemicals such as carbon monoxide.
Waste disposal methods: the waste toner could be considered as a plastic
waste for incineration. Package it adequately. Do not disprese the
toner into fire. Disposal should be subject to all applicable
federal, state and loc al laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene-acrylic copolymer
cas: 25767-47-9
fraction by wt: 35 - 45%
other rec limits: none specified
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30 - 40%
other rec limits: none specified
ingred name: styrene copolymer
cas: 29497-14-1
fraction by wt: 20 - 30%
other rec limits: none specified
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye and respiratory irritation in
prolonged exposure to excessive dust.
effects of overexposure: respiratory irritation.
medical cond aggravated by exposure: respiratory ailments can be
aggravated by excessive exposure.
First aid: eyes: flush with large amounts of water. Skin: wash with mild
soap and water. Inhalation: move to fresh air. Ingestion: drink
several glasses of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >248f,>120c
spec gravity: 1.5-1.7
solubility in water: not soluble
appearance and odor: fine black powder. Resin odor.
Stability indicator/materials to avoid: yes
strong oxidants.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide, carbon dioxide,
carbon. Products of ombustion are toxic. Avoid smoke inhalation.
conditions to avoid polymerization: will not occur.
Waste disposal methods: do not incinerate. Dispose of waste in
accordance with local, state and federal regulations concerning
fine nuisance dust containment.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 40-50%
other rec limits: none specified
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 25-45%
other rec limits: none specified
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: 2.5 mg/m3
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
ingred name: dry powdered toner product.(this product is considered a
nuisance dust with the following.)
rtecs #: 9999999zz
fraction by wt: 100%
other rec limits: none specified
osha pel: 10mg/m3 t-d/5mg/m3 r
acgih tlv: 10mg/m3 t-d/5mg/m3 r
Ld50 lc50 mixture: oral rat ld50: >5g/kg (non-toxic)
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye contact may cause temporary
discomfort. May cause slight irritation on prolonged and repeated
contact with the skin. Inhalation: dust may cause slight irritation
to respiratory tract.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: respiratory irritation in prolonged exposure to
excessive dust.
medical cond aggravated by exposure: respiratory ailments can be
aggravated by excessive exposure.
First aid: eyes: flush with running water while lifting eyelids open. If
irritation develops or persists, get medical attention. Skin: wash
with soap and plenty of water. If irritation develops or persists,
get medical attention. Inhalation: remove to fresh air. Get
medical attention if required. Ingestion: do not induce vomiting.
drink several glasses of water. Get medical attention.
Hcc: n1
vapor pres: 0
spec gravity: 1.5-1.7
solubility in water: negligible
appearance and odor: fine black powder, resin odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
none
hazardous decomposition products: none
Waste disposal methods: do not incinerate. Follow federal, state, and
local regulations concerning fine nuisance dust containment.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acryl copolymer
cas: 25153-46-2
fraction by wt: 40-50%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 25-45%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: 2.5 mg/m3
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9293
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no known health hazard when used as
intended in a printing device. However when handling toner and/or
cleaning/servicing printing device: eyes: irritation from dust.
skin: no known hazard. Inhalation: dust irritation of respiratory
system,gasping, coughing. Ingestion: no known hazard.
explanation of carcinogenicity: product contains no ingredients
currently classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: eyes: irritation from dust. Skin: no known
hazard, inhalation: respiratory irritation, gasping, coughing.
ingestion: no known hazard..
medical cond aggravated by exposure: no known health hazard when used as
intended in a printing device. However, when cleaning/servicing
printing device, exposure to dust may aggravated respiratory
ailments.
First aid: eyes: flush with large amounts of water. Skin: wash area with
soap and water. Inhalation: move to fresh air. Ingestion: not a
likely source of exposure.
Hcc: n1
melt/freeze pt: m.P/f.P text: 212f,100c
vapor pres: negligible
spec gravity: 1.25-1.65
evaporation rate & reference: negligible
solubility in water:
appearance and odor: fine powder. Slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: combustion will produce carbon
monoxide, carbon dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: this product may be produced from plastic and/or
metal. Dispose of waste in accordance with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene-acrylate copolymer
fraction by wt: 55-70%
other rec limits: none specified
ingred name: magnetic oxide
fraction by wt: 25-35%
other rec limits: none specified
ingred name: cca
fraction by wt: 1-3%
other rec limits: none specified
ingred name: ploywax
fraction by wt: 2-6%
other rec limits: none specified
ingred name: post additives
fraction by wt: 0.5-1.5%
other rec limits: none specified
Ld50 lc50 mixture: tlv 5 mg/m3 respirable dust
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: respiratory tract irritation, eye
irritation, low hazard for skin for industrial setting.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: respiratory tract irritation, gasping, eye
irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation: remove from exposure. Restore breathing. Keep
warm and quiet. Get medical attention. Skin: wash affected area
thoroughly with soap and water. If irritation persists, get medical
attention. Eyes: flush with large amounts of water for 15 minutes.
get medical attention.
Hcc: n1
boiling pt: b.P. Text: solid
melt/freeze pt: m.P/f.P text: 212f,100c
vapor pres: negligible
vapor density: not given
spec gravity: 1.4-1.6
evaporation rate & reference: negligible
solubility in water: nelgigible
appearance and odor: black fine powder, slight plastic odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon dioxide and carbon monoxide
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene-acrylic copolymer
cas: 25767-47-9
fraction by wt: 30-40% %
other rec limits: none recommended
ingred name: styrene copolymer
cas: 29497-14-1
fraction by wt: 20-30% %
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40% %
other rec limits: none recommended
ingred name: salicylic acid chelate
cas: 72869-85-3
fraction by wt: 1-3% %
other rec limits: none recommended
ld50 lc50 mixture: ld50 (oral, rat) is unknown.
route of entry inds - inhalation: no
skin: no
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: acute- toner powder is not accessable until the cartridge
is forced to be broken. Inhalation of dust may cause difficulty in breathing.
contact with eyes may cause irritation. Low skin hazard for indu strial
handling. Ingestion is unlikely.Chronic- unknown. Target organs: eyes, skin,
respiratory tract.
explanation of carcinogenicity: none
signs and symptions of overexposure: eyes, skin, respiratory tract irritation
medical cond aggravated by exposure: unknown
first aid: get medical attention if symptoms persist. Skin: wash with soap &
water. Remove contaminated clothing. Eye: flush with water for 15 minutes,
holding eyelids open. Inhaled: remove to fresh air. Oral: call a physician.
hcc: n1
nrc/state lic no: not relevant
m.P/f.P text: 212f - 302f
decomp text: unknown
spec gravity: 1.24 - 1.5
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: fine powder
corrosion rate: unknown
product id: ep-s cartridge (black),6121
cage: 0lpy7
company name: lasertek
street: 3455 west reno ave
city: las vegas nv
zipcode: 89119
health emergency phone: 800-252-7374
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: acute- toner powder is not accessable until the
cartridge is forced to be broken. Inhalation of dust may cause difficulty in
breathing. Contact with eyes may cause irritation. Low skin hazard for indu
strial handling. Ingestion is unlikely.Chronic- unknown. Target organs: eyes,
skin, respiratory tract. eyes, skin, respiratory tract
irritation
=======================================================
responsible party cage: 0lpy7
trans id no: 118962
product id: ep-s cartridge (black),6121
msds prepared date: 01/12/1993
review date: 02/10/1994
mfn: 1
net unit weight: 2.0 lbs
multiple kit number: 0
review ind: y
unit of issue: ea
container qty: 1
type of container: unknown
=======================================================
stability indicator: yes
stability condition to avoid: excessive heat
materials to avoid: strong oxidizers
hazardous decomposition products: thermal decomposition may produce carbon
monoxide and carbon dioxide.
hazardous polymerization indicator: no
conditions to avoid polymerization: not relevant
spill release procedures: wear protective equipments. Ventilate area. Sweep up,
place in a bag and hold for waste disposal. Avoid raising dust. Wash spill
site after material pickup is complete.
neutralizing agent: not relevant
waste disposal methods: dispose in an approved incinerator or contact with
licensed disposal agency. Disposal may be subject to local, state and federal
regulations.
handling and storage precautions: keep container closed away from oxidizing
materials. Keep out of reach of children.
other precautions: do not break cartridge. Avoid breathing dusts. Do not get in
eyes, on skin or on clothing. Wash thoroughly after handling and before
eating or drinking. Remove contaminated clothing promptly.
Ld50 lc50 mixture: ld50 (oral rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- contact with eyes may cause
irritation. Repeated contact with skin may cause irritation &
allergic skin reaction. May cause digestive tract irritation if
ingested. Inhalation of dust may cause irritation of the nose ,
throat & upperrespiratory tract. Chronic- none reported. Target
organs: eye, skin, respiratory.
explanation of carcinogenicity: none
effects of overexposure: eyes, skin, respiratory and digestive tracts
irritation
medical cond aggravated by exposure: pre-existing skin disorders
First aid: get medical attention if symptoms persist. Eye/skin: flush
with water for 15 minutes. Hold eyelids open. Inhaled: remove to
fresh air. Oral: get medical attention immediately.
Hcc: t6
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: 160f,71c
spec gravity: approx. 1.0
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: negligible
appearance and odor: fine black powder - faint odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat or flame
hazardous decomposition products: carbon monoxide, carbon dioxide
Waste disposal methods: when disposed, this material is not a hazardous
waste according to federal regulation 40 cfr 261. However, consult
local, state and federal regulations. Incineration only in a closed
container.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 55 - 60%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 35 - 40%
other rec limits: none recommended
ingred name: polyolefin
cas: 9003-07-0
fraction by wt: 1 - 5%
other rec limits: none recommended
ingred name: wax/polyolefin
cas: 9002-88-4
fraction by wt: 1 - 5%
other rec limits: none recommended
ingred name: silica gel/amorphous silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3.
acgih tlv: 10 mg/m3.
ingred name: chromium compounds (type not specified)
other rec limits: none recommended
ingred name: black pigment
cas: 88377-66-6
fraction by wt: 1 - 5%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye and respiratory irritation in
prolonged exposure to excessive dust.
effects of overexposure: respiratory irritation.
medical cond aggravated by exposure: respiratory ailments can be
aggravated by excessive exposure.
First aid: eyes: flush with large amounts of water. Skin: wash with mild
soap and water. Inhalation: remove from exposure. Ingestion: drink
several glasses of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >248f,>120c
spec gravity: 1.5-1.7
solubility in water: negligible
appearance and odor: fine black powder, resin odor.
Stability indicator/materials to avoid: yes
strong oxidants.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide, carbon dioxide,
carbon. Products of combustion are toxic. Avoid smoke inhalation.
Waste disposal methods: do not incinerate. Dispose of waste in
accordance with local, state and federal regulations concerning
fine nuisance dust containment.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 55-60%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
ingred name: dye
cas: 84179-66-8
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: polyoxypropylene glycol (mfg consider this as nuisance
dust)
cas: 25322-69-4
rtecs #: tr5250000
other rec limits: none recommended
ingred name: silica (mfg consider this as nuisance dust)
cas: 68611-44-9
fraction by wt: 0-1%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact-no specific hazard is
known to american laser. However, any material that contacts the
eye may be irritating. Skin-low hazard for industrial handling. No
data available for chronic effects of overexposure.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: inhalation-gasping. Do not breathe the dust.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of eye contact, flush with plenty of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: 100-150c
vapor pres: negligible
spec gravity: 1.4-1.5
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: toner is powder with slight plastic.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: combustion will produce carbon dioxide
and probably carbon monoxide.
Waste disposal methods: dispose in an appropiate incinerator or contract
with licensed disposal agency. Disposal may be subject to federal,
state or local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
fraction by wt: 55-65%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
ingred name: salicylic acid chromiium chelate
cas: 72869-85-3
fraction by wt: 1-3%
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no known health hazard when used as
intended in a copy machine.
explanation of carcinogenicity: none
effects of overexposure: irritation of eyes and respiratory tract may
occur in heavy dust conditions.
medical cond aggravated by exposure: none known
First aid: remove from exposure; wash skin with soap; flush eyes with
water; drink water if ingested.
Hcc: v7
melt/freeze pt: m.P/f.P text: >212f,>100c
spec gravity: 1.3-1.5
solubility in water: negligible
appearance and odor: black powder, faint odor
Stability indicator/materials to avoid: yes
none with common materials with which the product may reasonably come
into contact.
stability condition to avoid: avoid open flame.
hazardous decomposition products: toxic decomposition products formed on
combustion.
Waste disposal methods: dispose according to federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 55%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 35%
other rec limits: none recommended
ingred name: metal-complex azo-dye
cas: 88377-66-6
fraction by wt: 1%
other rec limits: none recommended
ingred name: polypropylene
cas: 9003-07-4
rtecs #: ud1842000
fraction by wt: 1%
other rec limits: none recommended
ingred name: polyethylene
cas: 9002-88-4
rtecs #: tq3325000
fraction by wt: 1%
other rec limits: none recommended
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 0.1-1%
other rec limits: none recommended
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
Ld50 lc50 mixture: tlv for dust is 10mg/m3
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause irritation.Skin: may
cause irritation.Ingest: unlikely route of exposure.Inhal: may cause
respiratory irritation.
explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.
effects of overexposure: minimum respiratory tract irritation may occur.
medical cond aggravated by exposure: persons with pre-existing
respiratory ailments may be at increased risk from exposure.
First aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Inhal: remove to fresh
air.Give oxygen or artificial respiration if needed.Ingest: unlikely
route of expos ure.
Hcc: n1
spec gravity: 1.1
solubility in water: negligible
appearance and odor: powder;black.Odor not reported.
Stability indicator/materials to avoid: yes
manufacturer states none.
stability condition to avoid: creation of dust+sources of ignition.
hazardous decomposition products: smoke.
Waste disposal methods: dispose of as normal waste in accordance with
federal,state and local regulations.Do not incinerate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredients
fraction by wt: 100%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute/chronic: no known health hazards
when used as intended in a laser printer.
explanation of carcinogenicity: none
effects of overexposure: minimal irritation of eyes and respiratory
tract may occur in heavy dust conditions.
medical cond aggravated by exposure: none known when used as intended.
First aid: eyes: flush with large amounts of water. Skin: wash area with
soap and water. Inhalation: move to fresh air. Ingestion: drink
several glasses of cool water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >212f,>100c
spec gravity: 1.15-1.30
solubility in water: insoluble
appearance and odor: black powder. Faint odor.
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: avoid open flames.
hazardous decomposition products: toxic decomposition products formed on
combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylic copolymer
cas: 25153-46-2
other rec limits: none recommended
ingred name: magnetite (iron oxide)
cas: 1317-61-9
other rec limits: none recommended
osha pel: 10 mg fe/m3 tdust
acgih tlv: 5 mg fe/m3 tdust9394
ingred name: dyestuff
other rec limits: none recommended
ingred name: polypropylene wax
cas: 9003-07-0
other rec limits: none recommended
ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: none recommended
osha pel: 10 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust 9394
Ld50 lc50 mixture: acute: ldlo value is over 10.0 g/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: none specified by manufacturer.
explanation of carcinogenicity: carbon black is listed by iarc as a
suspected carcinogen.
effects of overexposure: minimal irritation may occur as with exposure
to any non-toxic dust.
medical cond aggravated by exposure: accumulation of dust in the
respiratory system.
First aid: ingestion- rinse mouth with water. Call a physician.
inhalation- remove to fresh air. If effects occur, consult local
medical personnel. Eyes- in case of contact, immediately flush
eyes with water a nd seek medical treatment. skin- wash with soap
and water.
Hcc: n1
spec gravity: 1.2
solubility in water: negligable
appearance and odor: fine black powder, practically odorless.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: carbon monoxide and other
decomposition products in case of incomplete combustion.
Waste disposal methods: waste material should be disposed of in
accordance with federal, state and local regulations. Do not
incinerate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylic resin
cas: 26655-10-7
fraction by wt: 80-90%
other rec limits: none recommended
ingred name: polyoxypropylene glycol
cas: 25322-69-4
rtecs #: tr5250000
fraction by wt: 5-10%
other rec limits: none recommended
ingred name: dye
cas: 84179-66-8
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5-10%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9394
ingred name: trimethylated silica
cas: 68909-20-6
fraction by wt: 0-1%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation- minimal respiratory tract
irritation may occur as with exposure to large amounts of any
non-toxic dust.
effects of overexposure: none
medical cond aggravated by exposure: none when used as intended in the
printing equipment for which it is designed.
First aid: inhalation- remove from exposure. skin- wash with soapand
water. ingestion- dilute stomach contents with several glasses of
water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >212f,>100c
spec gravity: 1.5-1.7
solubility in water: negligible
appearance and odor: fine black powder, mild resinous odor.
Stability indicator/materials to avoid: yes
strong oxidants.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: products of combustioin can be toxic
depending on conditions.
Waste disposal methods: do not incinerate. Insure conformity with
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9394
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 25-45%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may cause irritation.
skin contact: repeated contact may cause irritation; may cause
allergic skin reaction. Inhalation: inhalation of dust could cause
respiratory irritation above the tl v but considered a low hazard.
ingestion: may cause irritation of the mucous membranes or
digestive tract.
explanation of carcinogenicity: not a carcinogen.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-immediately flush with plenty of running water for 15
minutes. Obtain medical attention skin-flush affected areas
promptly with water for 15 minutes. Remove contminated clothing. In
case of conti nued irritation, consult a physician. Inhalation-for
overexposure, remove to fresh air. Ingestion-obtain immediate
medical attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 160f,71c
vapor pres: negligible
spec gravity: 2.0
solubility in water: negligible
appearance and odor: fine black powder, slight odor.
Stability indicator/materials to avoid: yes
avoid strong oxidizers.
stability condition to avoid: excessive heat or flame.
hazardous decomposition products: carbon dioxide, carbon monoxide.
Waste disposal methods: according to federal regulation 40 cfr 261, this
material is not a hazardous waste when discarded. However, state
and local requirements may be more restrictive. Therefore,
consultation with the prope r state and local authorities is
advised.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer; (styrene acrylate polymer)
cas: 25153-46-2
fraction by wt: 55-60%
other rec limits: none determined
ingred name: iron oxide; (magnetite)
cas: 1317-61-9
fraction by wt: 35-40%
other rec limits: none determined
osha pel: 10 mg/m3 (as fe)
acgih tlv: 5 mg/m3 (as fe)
ingred name: pigment, black; (black pigment)
cas: 88377-66-6
fraction by wt: 1-5%
other rec limits: none determined
ingred name: propene polymers; (polyolefin)
cas: 9003-07-4
rtecs #: ud1842000
fraction by wt: 1-5%
other rec limits: none determined
ingred name: polyethylene; (polyolefin)
cas: 9002-88-4
rtecs #: tq3325000
fraction by wt: 1-5%
other rec limits: none determined
ingred name: silica; (amorphous silica)
cas: 7631-89-9
fraction by wt:
other rec limits: none determined
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no known health hazards when used as
intended in a printing machine.
effects of overexposure: minimal respiratory tract and eye irritation
may occur with exposure to large amounts of any non-toxic dust.
medical cond aggravated by exposure: none
First aid: get medical assistance for all cases of overexposure. eyes-
immediately flush thoroughly for 15 minutes. skin- wash with soap
and water. Inhalation- remove to fresh air. Give artifical
respiration if breathing has stopped. ingestion- if conscious
give water freely and get medical attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 266f,130c
spec gravity: 1.3
solubility in water: insoluble
appearance and odor: black powder, faint odor.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: open flames
hazardous decomposition products: carbon monoxide and other
decomposition products in case of incomplete combustion.
Waste disposal methods: used toner should be disposed of in an
environmentally safe manner and in accordance with all government
regulations. Do not incinerate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acrylic acid butyl ester polymer with styrene
cas: 25767-47-9
fraction by wt: 60-70%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: chromate(1-), bis
[1-((5-chloro-2-hydroxy-phenyl)az0)-2-naphtalenolato(2-)]-,hdrogen,
cas: 31714-55-3
fraction by wt: 0.1-0.5%
other rec limits: none recommended
ingred name: polypropylene
cas: 9003-07-0
rtecs #: tr5000000
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: silica
cas: 68909-20-6
fraction by wt: 0.1-0.5%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingestion- acute oral toxicity;
>10g/kg bodyweight. inhalation, eyes, and skin- none under normal
use.
effects of overexposure: minimal respiratory tract irritation may occur
with exposure to large amounts of any non-toxic dust.
medical cond aggravated by exposure: none
First aid: get medical assistance for all cases of overexposure. eyes-
immediately flush thoroughly for 15 minutes. skin- wash with soap
and water. Inhalation- remove to fresh air. Give artifical
respiration if breathing has stopped. ingestion- if conscious
give water freely and get medical attention.
Hcc: n1
solubility in water: insoluble
appearance and odor: black powder, odorless.
Stability indicator/materials to avoid: yes
none
hazardous decomposition products: carbon monoxide and other
decomposition products in case of incomplete combustion.
Waste disposal methods: used toner should be disposed of in an
environmentally safe manner and in accordance with all government
regulations. Do not incinerate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylic resin
cas: 26655-10-7
fraction by wt: 60-70%
other rec limits: none recommended
ingred name: polyolefin
cas: 9003-07-0
rtecs #: tr5000000
fraction by wt: 2-6%
other rec limits: none recommended
ingred name: iron oxide
cas: 1309-38-2
rtecs #: om4800000
fraction by wt: 20-40%
other rec limits: none recommended
ingred name: dye
cas: 84179-66-8
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: silica
cas: 68611-44-9
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner powder isn't accessible, unless
the cartridge is forced/broken into. Inhalation: grasping, do not
breathe dust. Eyes: any material contacting w/eyes may be
irritating. Skin: low hazard for industri al handling.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis does not expect it to be carcinogenic.
effects of overexposure: irritation of eyes, skin, respiratory tract,
grasping
medical cond aggravated by exposure: mfr gave no information on msds.
First aid: inhale: if symptomatic, move to fresh air. Get medical
attention if symptoms persists. Eyes: any material that contacts
the eye should be washed out immediately with water. Get medical
attention if sy mptoms occur. Skin: wash with soap and water. Get
medical attention if symptoms occur. Ingest: drink 1-2 glasses of
water. Seek medical attention.
Hcc: m1
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: 100 - 150 c.
vapor pres: negligible
spec gravity: 1.4-1.6
ph: unknon
evaporation rate & reference: (bu ac = 1): negligible
solubility in water: negligible
appearance and odor: black fine powder, slight plastic odor
percent volatiles by volume: negli
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: n/p.
hazardous decomposition products: carbon dioxide & carbon monoxide
conditions to avoid polymerization: will not occur.
Waste disposal methods: incinerate or landfill, can be incinerated when
in compliance with local regulations. Discharge, treatment, or
disposal may be subject to national, state, or local laws.
Ingred name: styrene acrylate copolymer,
cas: 25153-46-2
minumum % wt: 60.
maxumum % wt: 70.
ingred name: iron oxide
cas: 1317-61-9
minumum % wt: 30.
maxumum % wt: 40.
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: per msds: manufacturer contact states all other information
is proprietary.
rtecs #: 9999999zz
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: exposure under non-dusty
conditions should not cause any significant health effects. Under
dusty conditions, irritation may occur with some accumulation of
toner in the nose & throat. Skin : this product should not be a
significant hazard from dermal exposure.
explanation of carcinogenicity: not relevant.
effects of overexposure: eye-toner dust may cause a conjunctival
irritation but no chemical irritation or damage to the eye or its
parts. Ingestion-accidental ingestion of toner may cause nausea.
there are no known or reporte d effects from repeated ingestion of
this product.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: immediately flush with large amounts of water for at
least 15 minutes, occasionally lifting upper and lower eyelids. If
eye irritation develops, seek medical attention. Skin: not a skin
irritant . Wash with soap and water to remove.
Hcc: n1
Hazardous decomposition products: carbon monoxide and carbon dioxide.
Waste disposal methods: remove to an approved landfill site and dispose
of in accordance with federal, state, and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer; (styrene/acrylic copolymer
resin)
cas: 25153-46-2
ingred name: iron oxide
cas: 1317-61-9
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: iron (iii) oxide; (iron oxide)
cas: 1309-37-1
rtecs #: no7400000
osha pel: 10 mg/m3 (fe)
acgih tlv: 5 mg/m3 fume (fe)
ingred name: propene polymers; (polyolefin)
cas: 9003-07-4
rtecs #: ud1842000
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
ingred name: dye; (metal complex dye)
cas: 31714-55-3
ingred name: amorphous silica
cas: 112945-52-5
rtecs #: vv7310000
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: tlv 5 mg/m3 for respirable dust
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: none. Acute and chronic-
none when used as intended in the printing equipment for which it
is designed.
explanation of carcinogenicity: none
effects of overexposure: none when used as intended in the printing
equipment for which it is designed.
medical cond aggravated by exposure: none when used as intended in the
printing equipment for which it is designed.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: drink water to dilute. Get
medical atte ntion if necessary.
Hcc: n1
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: >212f,>100c
spec gravity: 1.5 - 1.7
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: negligible
appearance and odor: fine black powder - mild resinous odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none
hazardous decomposition products: may form toxic products and smoke.
Waste disposal methods: landfill or incinerate. Ensure conformity with
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 26 - 46%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Hcc: n1
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylic copolymer
fraction by wt: 55-65%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
ingred name: salicylic acid chromiium chelate
cas: 72869-85-3
fraction by wt: 1-3%
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: the toner powder cannot be removed
until the cartridge is forced to be broken.Inhal: toner finely
divided solid.Dont breath dust.Eye: no specific haz is known to
canon.However any matl that contact eye may be irrit.Skin: low haz
for industrial hndlg.No data avai for chronic effects of
overexposure.
explanation of carcinogenicity: per msds: no carcinogen/pot carcinogen
according to iarc/ntp/osha/ec directive.
effects of overexposure: inhal: toner finely divided solid.Dont breath
dust.Eye: no specific haz is known to canon.However any matl that
contact eye may be irrit.Skin: low haz for industrial hndlg.No data
avai for chronic effect s of overexposure.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush w/plenty of water.Skin: wash w/soap/water.
Hcc: n1
boiling pt: b.P. Text: n/avai
melt/freeze pt: m.P/f.P text: 212f,100c
decomp temp: decomp text: np
vapor pres: negligible
vapor density: n/applicab
spec gravity: 1.0-6.0
ph: np
viscosity: np
evaporation rate & reference: negligible, buacetate=1
solubility in water: negligible
appearance and odor: toner is fine powder, with slight plastic odor.
percent volatiles by volume: neglig
corrosion rate: np
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: combustion will produce carbon dioxide
and possibly toxic chemicals such as carbon monoxide.
Waste disposal methods: prod constructed frm plastics & metals.Waste
toner could be considered as plastic waste.Dispo should be subj to
loc/state/fed laws.Chems required to report under sara title iii
sec 313: chromiun(iii) & cmpd: 2.0%(max)(as crhomium
(iii)metal: 0.2%(max)).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate coploymer
fraction by wt: 55-65%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: chromium (sara 313) (cercla),chromium(iii) & cmpd: 2.0%(max)
(as chromium (iii) metal: 0.2%(max)).
cas: 7440-47-3
rtecs #: gb4200000
fraction by wt: see ing
other rec limits: none recommended
osha pel: 1 mg/m3
acgih tlv: 0.5 mg/m3; 9596
epa rpt qty: 1 lb
dot rpt qty: 1 lb
Ld50 lc50 mixture: tlv (respirable dust): 5 mg/m3
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: minimal respiratory irritation may
occur as with exoposure to large amounts of any non-toxic dust.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen by iarc, ntp or osha.
effects of overexposure: respiratory irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhaled-remove to fresh air. Eyes-lift lids & flush with
plenty of water. Get medical attention if irritation persists.
skin-wash with soap & water. Ingestion-if conscious, drink several
glasses of wa ter. Call a physician.
Hcc: n1
melt/freeze pt: m.P/f.P text: >212f,>100c
spec gravity: 1.4-1.6
solubility in water: negligible
appearance and odor: finely divided black powder, slight plastic odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: as with other organic material,
decomposition will produce carbon dioxide and carbon monoxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: no special disposal technique required.Ensure
compliance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: amorphous silica
cas: 7631-86-9
other rec limits: none recommended
ingred name: dyestuff
cas: 31714-55-3
other rec limits: none recommended
ingred name: iron oxide
cas: 1309-37-1
rtecs #: no7400000
other rec limits: none recommended
osha pel: 10 mg/m3 (fe)
acgih tlv: 5mg(fe)/m3fume,b2;96
ingred name: polyolefin or polypropylene
cas: 9003-07-0
other rec limits: none recommended
ingred name: styrene acrylate
cas: 26655-10-7
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral rat) is >5000 mg/m3
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause eye irritation. Unlikely to
cause skin irritation. Minimal respiratory tract irritation may
occur as with exposure to large amounts of any toxic dust.
ingestion is not applicable route of en try for intended use.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis does not expect it to be carcinogenic.
effects of overexposure: eyes-irritation. Inhaled-minimal respiratory
irritation.
medical cond aggravated by exposure: mfr gave no information on msds.
First aid: ingested-dilute stomach contents with several glasses of
water. Inhaled-remove victim to fresh air. Eyes-flush with running
water for at least 15 minutes. Skin-wash with soap & water.
Hcc: n1
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: 212f,100c
spec gravity: not applicable1
solubility in water: negligible
appearance and odor: black fine powder, slight plastic odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: mfr gave no information on msds.
hazardous decomposition products: combustion will produce carbon dioxide
& carbon monoxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: this product is contructed from platsics and
metals. The waste toner could be considered as plastic waste.
disposal should be subject to local, state and federal regulations.
Ingred name: styrene acrylate copolymer,
cas: 25153-46-2
fraction by wt: 45-55%
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 45-55%
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Ld50 lc50 mixture: ld50 (oral rat) is >5000 mg/m3
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye effects: may cause eye irritation.
skin effects: unlikely to cause skin irritation. Inhalation
effects: minimal respiratory tract irritation may occur as with
exposure to large amounts of any toxi c dust. Ingestion effects:
ingestion is not applicable route of entry for intended use.
explanation of carcinogenicity: not a known or suspected carcinogen
according to any iarc monograph, ntp, osha regulations (usa), eu
directive or proposition 65 (california).
effects of overexposure: eyes-irritation. Inhaled-minimal respiratory
irritation.
medical cond aggravated by exposure: no data provided by responsible
party
First aid: after ingestion: rinse mouth with water. Drink one or two
glasses of water. If symptoms occur, consult a physician. After
inhalation: move person to fresh air immediately. If symptoms
occur, consult a physician. After contact with eyes: immediately
flush with large amounts of clean, lukewarm water (low pressure)
for at least 15 minutes. If symptoms occur, consult a physician.
after contact with sk in: wash affected areas thoroughly with soap
and water. If symptoms occur, consult a physician.
Hcc: n1
melt/freeze pt: =100.C, 212.F
m.P/f.P text: 100-150c softening point
spec gravity: 1.4-1.6
solubility in water: negligible
appearance and odor: black fine powder, slight plastic odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: no data provided by responsible party.
hazardous decomposition products: combustion will produce carbon dioxide
and possibly toxic chemicals such as carbon monoxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: recommendation: consultation with the disposal
agency and the relevant authorities; cleansing agent is water.
Ingred name: styrene acrylate copolymer,
cas: 25153-46-2
minumum % wt: 60.
maxumum % wt: 70.
ingred name: iron oxide
cas: 1317-61-9
minumum % wt: 30.
maxumum % wt: 40.
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3