NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $125.43 to $209.05.. | |
| Does NSN 6850-01-269-7118 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Navy, and National Aeronautics and Space Administration | |
| What is the NIIN of NSN 6850-01-269-7118? | |
| 012697118 or 01-269-7118 | |
| Does NSN 6850-01-269-7118 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-269-7118? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Dec 20, 1987 | |
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: irritation upon direct eye contact may
be harmful if swallowed; vapors at excessively high temperatures
may produce irritation of nose and throat.
effects of overexposure: irritation.
medical cond aggravated by exposure: none stated.
First aid: inhale: remove to fresh air; eye: flush eyes with water for 15
minutes,get medical attention; ingest: dilute with large quantities
of water;induce vomiting only if victim is conscious & alert,get
medical attention.
Hcc: n1
vapor pres: negligible
spec gravity: 2.33
solubility in water: negligible
appearance and odor: gray paste.
percent volatiles by volume: neg
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: co,co*2,silicone dioxide.
Waste disposal methods: dispose of all spilled material & water rinses
in accordance with current state,local & federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethyl silicone
fraction by wt: 100.0%
ingred name: non-hazardous mineral fillers
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation hazard unlikely at
room temperature. Heating can generate vapors which may cause
respiratory irritation. Contact may cause skin and eye irritation.
harmful if swallowed. Chronic: unl ikely to occur unless applied in
manner which creates mists/fumes or if cured product is machined,
creating dust.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: skin: irritation, redness, discomfort.
swallowed: none specified; suspected, nausea, vomiting. Inhaled:
unlikely; coughing, wheezing, shortness of breath, headache,
nausea. Eyes: redness, tearing, burn ing sensation, blurred vision.
medical cond aggravated by exposure: no data is available for this
product mixture.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing.
flush exposed skin area with water followed by washing with soap
and water. If irritation occurs, get medical attention.
inhalation: remove victim to fresh air & provide oxygen or
artificial respiration as required. Get medical attention.
ingestion: if conscious, give water t o drink. Get medical
attention.
Hcc: v5
boiling pt: b.P. Text: n/d
vapor pres: negligible
vapor density: n/d
spec gravity: 2.45-2.55
solubility in water: insoluble
appearance and odor: off-white liquid/paste.
percent volatiles by volume: negligible
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, bases.
stability condition to avoid: avoid incompatible materials, storage in
open containers. Exposure to open flame or uncontrolled exposure to
heat, uncontrollled mixing with curing agents.
hazardous decomposition products: carbon monoxide,carbon dioxide, oxides
of silicone, zinc & aluminum, other organic compounds. chemical
nature & quantity of decomposition by-products varies depending on
conditions of combustion.
conditions to avoid polymerization: avoid storage in open containers,
exposure to open flame or uncontrolled exposure to heat,
uncontrolled mixing.
Waste disposal methods: dispose of all spilled material & water rinses
in accordance with current state, local & federal regulations.
Ingred name: aluminum oxide
cas: 1344-28-1
rtecs #: bd1200000
minumum % wt: 70.
maxumum % wt: 80.
other rec limits: none recommended
osha pel: 15 mg/m3 (t.Dust)
acgih tlv: 10 mg/m3 (t.Dust)
ingred name: silicone resin
cas: 63148-62-9
rtecs #: jt6484500
minumum % wt: 15.
maxumum % wt: 25.
ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
minumum % wt: 5.
maxumum % wt: 10.
osha pel: 15 mg/m3
Ld50 lc50 mixture: not provided
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: irritating. Symptoms may
include blurred vision, burning sensation and tearing. Skin
contact: may cause slight skin irritation. Inhalation: heating can
generate vapors that may cause resp iratory irritation, nausea and
headaches. Inhalation hazard at room temperature is unlikely, due
to the low volality of this product. Ingestion: harmful if
swallowed. Chronic health effects: exposure to the filler material
listed in ingredient section is unlikely to occur unless product is
applied in a manner which results in generation of mists or fumes,
or when machining of the cured product res ults in generation of
dust particles.
explanation of carcinogenicity: none
effects of overexposure: eye contact: irritating. Symptoms may include
blurred vision, burning sensation and tearing. Skin contact: may
cause slight skin irritation. Inhalation: heating can generate
vapors that may cause resp iratory irritation, nausea and
headaches.
medical cond aggravated by exposure: no data is available for this
product mixture.
First aid: eye contact: flush throughly with water for at least 15
minutes while holding eyelids open. Get medical attention. Skin
contact: remove any contaminated clothing. Flush affected area
throughly with wa ter. Follow by washing with soap and water. Get
medical attention if irritation persists. Inhalation: remove to
fresh air. Provide oxygen if breathing is difficult. Give
artificial respiration if not breathing. Get immediate medical
attention. Ingestion: dilute by giving plenty of water to drink, if
victim is conscious and alert. Never give anything by mouth to a
drowsy, unconscious/convulsing per son. Get immediate medical
attention .
Hcc: v5
nrc/state lic num: not relevant
boiling pt: b.P. Text: not determined
melt/freeze pt: m.P/f.P text: not provided
decomp temp: decomp text: not provided
vapor pres: negligible
vapor density: n/d
spec gravity: 2.45-2.55
evaporation rate & reference: not provided
solubility in water: insoluble
appearance and odor: off white liquid/paste.
percent volatiles by volume: negligible
corrosion rate: not provided
Incompatible with strong oxidizers, acids, bases.
stability condition to avoid: avoid storage in open containers, exposure
to open flame or uncontrolled exposure to heat, uncontrolled mixing
with curing agents or exposure.
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of silicon, zinc and aluminum and other organic substances
may be formed during combustion.
Waste disposal methods: dispose of in accordance with current federal,
state and local regulations.
Ingred name: aluminum oxide
cas: 1344-28-1
rtecs #: bd1200000
minumum % wt: 70.
maxumum % wt: 80.
other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: silicone resin
cas: 63148-62-9
rtecs #: jt6484500
minumum % wt: 15.
maxumum % wt: 25.
other rec limits: not provided
ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
minumum % wt: 5.
maxumum % wt: 10.
other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3