NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An electrically charged chemical agent, used in copy processing, which transfers the image from the charged areas of a selenium drum to the recorder paper.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Chemical preparation for photographic uses & unmixed products for photographic uses, measured/retail sale, ready for use, except sensitizes emulsions
Chemicals prepared for photographic use (except varnish, glue, etc.); unmixed products for photo use in measured portions or ready to use retail packs
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $148.35 to $247.25.. | |
| Does NSN 6850-01-318-7446 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy | |
| What is the NIIN of NSN 6850-01-318-7446? | |
| 013187446 or 01-318-7446 | |
| Does NSN 6850-01-318-7446 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-318-7446? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 25, 1990 | |
Ld50 lc50 mixture: ld50: (oral,mouse)>5000 mg/kg.
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product has been extensively tested &
evaluated by mfr. When used as intended by consumer in konica
copiers it does not represent any known health or safety hazards.
minimal respiratory tract irritati on may occur w/any large amounts
of non-toxic dust.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none currently determined.
First aid: ingest: dilute stomach contents w/several glasses of water.
inhal: remove from exposure. Eye: flush w/water for at least 15
minutes. Call md. Skin: wash w/soap & water.
Hcc: n1
spec gravity: 1.1 (h*2o=1)
solubility in water: negligible
appearance and odor: fine black powder w/slight mild odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: temperatures above 200c.
hazardous decomposition products: combustion will produce co*2 & co.
avoid breathing smoke.
Waste disposal methods: no special disposal procedures required. Ensure
conformity w/federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 7-12%
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
ingred name: silica gel; (silica (amorphous))
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
osha pel: 6 mg/m3 dust
acgih tlv: 10 mg/m3 tdust
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
Ld50 lc50 mixture: ld50 (oral, rat) is > 5,000 mg/kg.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-product has been evaluated.When
used as intended,it does not represent any known hazard.Eye: may
cause mechanical irritation.Skin: not irritant.Inhale: minimal
respiratory tract irritation may occu r as with exposure to large
amounts of any non-toxic dust.Oral: practically
non-toxic.Chronic-respiratory irritation.
effects of overexposure: minimal respiratory tract irritation may occur
as with exposure to large amounts of any non-toxic dust.
medical cond aggravated by exposure: none when used as described by
product literature.
First aid: get medical care if needed. Inhalation: remove to fresh air.
eyes: immediately flush with water for 15 minutes holding eyelids
open. Skin: wash with soap & water. Ingestion: dilute stomach
contents wi th several glasses of water.
Hcc: n1
vapor pres: negligible
spec gravity: 1.1
evaporation rate & reference: negl (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: fine black powder, slight mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: stable except above 200c.
hazardous decomposition products: carbon dioxide and carbon monoxide
Waste disposal methods: disposal should be in accordance with all
applicable federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyester resin
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 7 - 12%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9293
ingred name: wax-1
other rec limits: none recommended
ingred name: wax-3
other rec limits: none recommended
ingred name: silica gel/silica (amorphous)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
Ld50 lc50 mixture: ld50 (oral, mouse) >5,000 mg/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, lungs. Acute-
eyes: dust may cause mechanical irritation. Inhalation: minimal
respiratory tract irritation may occur as with exposure to large
amount of any non-toxic dust. Oral: low toxicity.
skin: non-irritating. Chronic-may cause lung damage.
explanation of carcinogenicity: none
effects of overexposure: irritation
medical cond aggravated by exposure: persons with pre-existing eye
problems or impaired respiratory function may be more susceptible
to the effects of this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Eyes: flush with plenty of water. Hold eyelids open. Skin: wash
with water & mild soap. Oral: wash out mouth with water & drink 1-2
glass es of water. Get medical attention.
Hcc: n1
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: 276f,136c
decomp temp: decomp text: >392f,>200c
spec gravity: 1.2
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: fine black powder - slight odor
Stability indicator/materials to avoid: yes
oxidizing agents
stability condition to avoid: excessive heat (>392f/200c)
hazardous decomposition products: carbon monoxide, carbon dioxide, smoke
may be formed.
Waste disposal methods: consult local, state and federal regulations for
the proper disposal method. Do not throw away the toner cartridge
into the fire.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyester resin (% is trade secret)
fraction by wt: see ing
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5 - 12%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9596
ingred name: wax-1 (% is trade secret)
fraction by wt: see ing
other rec limits: none recommended
ingred name: wax-3 (% is trade secret)
fraction by wt: see ing
other rec limits: none recommended
ingred name: silica gel (amorphous)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596