NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 6850-01-323-3172 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Canada | |
| What is the NIIN of NSN 6850-01-323-3172? | |
| 013233172 or 01-323-3172 | |
| Does NSN 6850-01-323-3172 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-323-3172? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jul 26, 1990 | |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: minimal respiratory tract irritation
may occur as with expsore to large amounts of any non-toxic dust.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhal: remove from exposure. Eye: any matertial that contacts
the eye may be irritating. Flush with plenty of water for at least
15 min. Skin: wash with soap and water. Ingest: get md immediately
(fp n).
Melt/freeze pt: m.P/f.P text: >212f,>100c
vapor pres: negligible
spec gravity: 1.4-1.6
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: none specified by manufacturer.
percent volatiles by volume: neglig
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: as with any other organic matl,
combustion will produce co*2 and probably co.
Waste disposal methods: no special disposal technique required. Insure
compliance with federal, state and/or local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acryl copolymer
fraction by wt: 55-65%
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3 (fume)
ingred name: salicylic acid chromium chelate
cas: 72869-85-9
fraction by wt: 1-3%
osha pel: 0.5 mg(cr)/m3
acgih tlv: 0.5 mg(cr)/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner powder is not accessible, unless
cartridge is broken. Inhal: gasping. Do not breathe dust. Eye
contact: no specific hazard is known to mfr. However, any matl that
contacts eye may be irritating. S kin: low hazard for industrial
handling.There is no data available fro chronic effects of
overexposure.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush w/plenty of water for at least 15 minutes.
ingest: call md immediately . Inhal: remove to fresh air. Support
breathing (give o*2/artf resp) . Skin: flush w/copious amounts of
water. call md .
Melt/freeze pt: m.P/f.P text: >212f,>100c
vapor pres: negligible
spec gravity: 1.4-1.6(h*2o=1)
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: assembly for lbp-sx, composed of photosensitive
drum, black toner (supp data)
percent volatiles by volume: neglig
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: as with any other organic material,
combustion will produce carbon dioxide & probably carbon monoxide.
Waste disposal methods: the waste toner could be considered as a plastic
waste. For incineration, package it adequately. Do not disperse
toner into fire. Disposal may be subject to federal, state or local
laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acrylic acid, butyl acrylate, sytrene polymer; (styrene
acrylate copolymer)
cas: 25586-20-3
fraction by wt: 30-40%
osha pel: n/k
acgih tlv: n/k
ingred name: styrene polymer w/monobutyl maleate; (styrene copolymer)
cas: 25215-62-7
fraction by wt: 20-30%
osha pel: n/k
acgih tlv: n/k
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: no osha: no
health hazards acute and chronic: inhalation: human exposure to toner
has been shown to cause minimal respiratory tract irritation. Eyes:
may cause transient irritation.
explanation of carcinogenicity: see ingredients.
effects of overexposure: irritation.
First aid: inhalation: remove to fresh air. Eyes: wash out immediately
w/water. Skin: wash w/soap & water. Ingestion: drink 1-2 glasses of
water. Obtain medical attention in all cases.
Melt/freeze pt: m.P/f.P text: 212-302f
spec gravity: 1.4-1.6
solubility in water: negligible
appearance and odor: black fine powder w/typical plastic odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: co2, co
Waste disposal methods: incinerate/landfill, can be incinerated
iaw/federal, state & local regulations. Discharge,
treatment/disposal may be subject to national state/local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer *95-4*
cas: 23153-46-2
fraction by wt: 60-70%
ingred name: iron oxide, magnetite *95-4*
cas: 1317-61-9
fraction by wt: 30-40%
ingred name: chromium metal, chromium, chrome (known carcinogen by ntp;
iarc carc - group 3) *95-4*
cas: 7440-47-3
rtecs #: gb4200000
fraction by wt: 0.5%
acgih tlv: 0.5 mg/cum
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: chromium compounds (type not specified)
fraction by wt: 2%
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute and chronic: none listed by
manufacturer.
explanation of carcinogenicity: not relevant.
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: ingest: call md immediately . Inhal: remove to fresh air.
support breathing (give o*2/artf resp) . Eyes: flush w/water for @
least 15 mins. Skin: wash w/soap & water.
Melt/freeze pt: m.P/f.P text: 0
spec gravity: 1.5-1.7(h*2o=1)
solubility in water: negligible
appearance and odor: fine black powder, mild resinous odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: combust will produce carbon dioxide
and possible toxic chemicals such as carbon monoxide.
Waste disposal methods: disposal should be subject to federal, state, or
local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
ingred name: non-hazardous ingredients
osha pel: n/k
acgih tlv: n/k