NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An electrically charged chemical agent, used in copy processing, which transfers the image from the charged areas of a selenium drum to the recorder paper.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Chemical preparation for photographic uses & unmixed products for photographic uses, measured/retail sale, ready for use, except sensitizes emulsions
Chemicals prepared for photographic use (except varnish, glue, etc.); unmixed products for photo use in measured portions or ready to use retail packs
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACE4 - Toner cartridges
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $148.23 to $247.05.. | |
| Does NSN 6850-01-343-6998 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, National Security Agency, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, Office Of The Secretary Of Transportation, National Aeronautics and Space Administration, National Aeronautics and Space Administration, Veterans Administration, Singapore, France, United Kingdom, Netherlands, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 6850-01-343-6998? | |
| 013436998 or 01-343-6998 | |
| Does NSN 6850-01-343-6998 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-343-6998? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 15, 1991 | |
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: toner powder is not accessible,
until the cartridge is forced to be broken. Inhal: toner is finely
divided solid. Do not breathe dust. Eyes: no specific haz is known
to canon. However, any matl that contacts the eye may be irrit.
skin: low hazard for industrial handling. Chronic: no data
available.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with plenty of water. Skin: wash with soap and
water.
Hcc: v7
melt/freeze pt: m.P/f.P text: >212f,>100c
vapor pres: negligible
spec gravity: 1.4-1.6(h*2o=1)
evaporation rate & reference: negligible (buac=1)
solubility in water: negligible
appearance and odor: toner is fine powder, with slight plastic odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: combustion will produce co*2 &
possible toxic chemicals such as co.
Waste disposal methods: this product is constructed from plastics &
metals. The waste toner could be considered as plastic waste.
disposal should be subject to federal, state or local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
fraction by wt: 45-55%
ingred name: iron (iii) oxide
cas: 1309-37-1
rtecs #: no7400000
fraction by wt: 45-55%
osha pel: 10 mg/m3 (fe)
acgih tlv: 5 mg/m3(fe),b2; 9293
ingred name: silica gel; (amorphous silica)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 0.5-2%
other rec limits: 4 mg/m3 (mfr)
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
Ld50 lc50 mixture: tlv 10 mg/m3 tdust/5 mg/m3 respirable
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eye/skin: not irritant.
inhalation: minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust. Ingestion:
practically non-toxic. Chronic- no adverse effects.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: minimal respiratory tract irritation may occur
as with exposure to large amounts of any non-toxic dust.
medical cond aggravated by exposure: respiratory ailments can be
aggravated by excessive exposure to the product dust.
First aid: get medical care if needed. Inhalation: remove to fresh air.
eyes: immediately flush with water for 15 minutes holding eyelids
open. Skin: wash with soap & water. Ingestion: dilute stomach
contents wi th several glasses of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >248f,>120c
spec gravity: 1.5 - 1.7
solubility in water: insoluble
appearance and odor: fine black powder, resin odor
Stability indicator/materials to avoid: yes
none
stability condition to avoid: excessive heat, flames, generating dust
hazardous decomposition products: may form carbon monoxide and carbon
dioxide
Waste disposal methods: do not incinerate. Disposal should be in
accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 40 - 50%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 25 - 45%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9293
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause respiratory
irritation if inhaled. Contact with eye may cause irritation.
chronic: no known effects for a prolonged or repeated exposure.
explanation of carcinogenicity: no ingredients of a concentration of
0.1% or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: eyes: redness, discomfort. Inhaled: coughing,
shortness of breath, sneezing.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhaled: remove to fresh air. Eyes: flush with lots of water.
if irritation persists, see doctor. Skin: wash with soap and water.
ingested: none specified by manufacturer.
Hcc: m1
Hazardous decomposition products: as with any other organic material,
combustion will produce carbon dioxide and probaby carbon monoxide.
Waste disposal methods: no special disposal technique required. Dispose
of in accordance with local, state and federal regulations.
cartidge may be considered plastic waste. The cartridge is composed
of plastics and metals.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
fraction by wt: 45-55%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 45-55%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is >9000 mg/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: when used as intended, it does not
represent a health or safety hazard. Minimal respiratory irritation
may occur as with exposure to large amounts of non-toxic dust.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: inhaled: coughing. Sneezing, wheezing,
shortness of breath.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with water. Skin-wash with soap and water.
inhalation-remove for exposure. Ingested-if conscious, dilute
stomach with several glasses of water.
Hcc: n1
spec gravity: 1.41
solubility in water: negligible
appearance and odor: fine black powder; faint odor.
Stability indicator/materials to avoid: yes
none.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: products of combustion are toxic.
avoid breathing smoke.
conditions to avoid polymerization: will not occur.
Waste disposal methods: do not incinerate. No special techniques beyond
normal practice. Insure conformity with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, acrylate copolymer
cas: 25213-39-2
fraction by wt: 55-60%
other rec limits: none recommended
ingred name: magnetite [iron oxide]
cas: 1309-37-1
rtecs #: no7400000
fraction by wt: 35-40%
other rec limits: none recommended
osha pel: 10 mg/m3 (fe)
acgih tlv: 5mg(fe)/m3fume,b2;94
ingred name: polyolefin
cas: 9003-07-0
fraction by wt: 5-10%
other rec limits: none recommended
ingred name: metal complex azo dye [dye]
cas: 84179-66-8
fraction by wt:
other rec limits: none recommended
ingred name: amorphous silica [silica gel]
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
ingred name: metal oxide
cas: 1306-38-3
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner powder is not accessible, unless
cartridge is forced or broken into. inhalation- minimal
respiratory tract irritation may occur with exposure to large
amounts of any non-toxc dust. there are n o known health hazards,
mutagenicity, carcinogenicity or teratogenicity.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
First aid: eyes: immediately flush with plenty of water for at least 15
minutes. skin: immediately flush with plenty of water while
removing contaminated clothing. Inhalation: remove from exposure to
fresh air. Ingestion: if conscious, give water todrink. Get
medical attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 100-150c
vapor pres: negligible
spec gravity: 1.4-1.6
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: fine powder, slight plastic odor.
percent volatiles by volume: negl.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide and carbon dioxide.
Waste disposal methods: dispose in accordance with federal, state and
local regulations. No special disposal technique required.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate coploymer
fraction by wt: 45-55%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 45-55%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: dust may cause
irritation.Skin: unlikely to be hazardous.Ingest: unlikely route of
exposure.Inhal: dust may cause respiratory irritation.
explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.
effects of overexposure: eyes/inhal: irritation.
medical cond aggravated by exposure: unlikely to aggrivate existing
medical conditions.
First aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Inhal: remove to fresh
air.Give oxygen or artificial respiration if needed.Ingest: do not
induce vomiting. Get prompt qualified medical attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 248f,120c
spec gravity: 1.3-1.8
solubility in water: insoluble
appearance and odor: powder,fine;black.Odor not reported.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: open flames.
hazardous decomposition products: unspecified toxic compounds.
Waste disposal methods: dispose of in accordance with federal,state and
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylic copolymer
cas: 25036-16-2
fraction by wt: 43-53%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 40-50%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: chromate(1-), bis
[1-((5-chloro-2-hydroxy-phenyl)az0)-2-naphtalenolato(2-)]-,hdrogen,
cas: 31714-55-3
fraction by wt: .1-1%
other rec limits: none recommended
ingred name: polypropylene
cas: 9003-07-0
rtecs #: tr5000000
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: silicon dioxide (amorphous)
cas: 67762-90-7
fraction by wt: .1-1%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: respiratory irritation in prolonged
exposure to excessive dust.
explanation of carcinogenicity: per msds: carcinogenicity: none,
ntp/iarc/osha: n/a.
effects of overexposure: respiratory irritation.
medical cond aggravated by exposure: respiratory aliments can be
aggravated by excessive exposure.
First aid: eye: flush w/water. Inhal: remove from exposure. Ingest: drink
several galsses of water. Skin: wash w/mild soap & water.
Hcc: n1
melt/freeze pt: m.P/f.P text: >248f,>120c
spec gravity: 1.5-1.7
solubility in water: not soluble.
appearance and odor: fine blace powder, resin odor.
Stability indicator/materials to avoid: yes
none specified by mfg.
stability condition to avoid: none specified by mfg.
hazardous decomposition products: none specified by mfg.
Waste disposal methods: do not incinerate. Follow local, state and
federal regulations concerning fiune nuisance dust containment.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
cas: 25153-46-2
fraction by wt: 40-50%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 25-45%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt:
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9394
ingred name: per msds: all other ingred are not required under federal
communications standard.
rtecs #: 9999999zz
other rec limits: none recommended
ld50 lc50 mixture: unknown
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: toner powder is not accessible unless cartridge is forced
or broken into. Minimal respiratory tract irrit may occur as with exposure to
lg amts of any dust.
explanation of carcinogenicity: per msds: ingred listed are not listed onlatest
ntp/iarc/osha regs.
signs and symptions of overexposure: minimal resp tract irritation.
medical cond aggravated by exposure: none specified by manufacturer.
first aid: inhla: remove from exposure. Eye: no specific haz is known to canon.
however any material that contacts eye may be irritating. In case of contact
flush w/plenty of wter. If irrit persists contact physic ian. Skin: wash
w/soap/water.
hcc: n1
m.P/f.P text: 212f,100c
vapor pres: negligible
spec gravity: 1.4-1.6
evaporation rate & reference: negl,(n-butyl acetate=1)
solubility in water: negligible
appearance and odor: none specified by manufacturer.
percent volatiles by volume: neglig
product id: ep-n, ep-nii cartridge black, item no: r64-2002,r64-2014
cage: 08yz7
company name: canon usa inc
street: one canon plz
city: new hyde park ny
zipcode: 11042
health emergency phone: 516-488-6700/800-424-9300(chemtrec)
label required ind: y
date of label review: 05/01/1995
status code: c
label date: 05/01/1995
origination code: f
eye protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 08yz7
trans id no: 127447
product id: ep-n, ep-nii cartridge black, item no: r64-2002,r64-2014
msds prepared date: 03/01/1993
review date: 05/01/1995
mfn: 1
net unit weight: unknown
multiple kit number: 0
review ind: y
unit of issue: ea
container qty: 1
type of container: cartridge
additional data: per msds: dot proper shipping name: magnetized material (10 or
more cartridges), haz class: 9, un2607.
Hazard and precautions: toner powder is not accessible unless cartridge is
forced or broken into. Minimal respiratory tract irrit may occur as with
exposure to lg amts of any dust. Keep out of reach of children. Keep away fr
om contact with oxidizing materials. First aid: inhla: remove from exposure.
eye: no specific haz is known to canon. However any material that contacts eye
may be irritating. In case of contact flush w/ plenty of wter. If irrit
persists contact physician. Skin: wash w/soap/water. Dot proper shipping
name: magnetized matl (10 or more cartridges), haz class: 9, un2807.
spill release procedures: no toner spillage occurs in normal operation or
handling. If it should occur avoid inhal of dust & sweep matl onto paper
for disposal.
waste disposal methods: no special disposal technique required. Ensure
compliance w/fed,state, &/or local regs. Exhausted cartridge(s) may be
considered plastic waste & is composed of plastic & metals. No chem
required to re port under sara tit iii, cercla.
handling and storage precautions: keep out of reach of children. Keep away from
contact with oxidizing materials.
other precautions: dept of transportation: proper shipping name: magnetized matl
(10 or more cartridges), haz class: 9, un2607.
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may cause irrit.Skin: repeated
contact may cause irrit;may cause allergic skin
reaction.Inhal: inhal of dust could causes resp irrit above tlv but
considered a low haz.Ingest: may cause irrit of muco us membranes or
digestive tract.Chronic: computerized literature search of nat
databases did not yield chronic effects.
explanation of carcinogenicity: per msds: carcinogenicity
listing: ntp/iarc/osha: no.
effects of overexposure: eye irrit. Skin irrit. Allergic skin reaction.
mucous membranes or digestive tract irrit.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: immed flush w/plenty of running water for 15mins. Obtain
med attn. Skin: flush affected areas promptly w/water for 15moins.
remove contamin clothing. In case of contd irrit consult physician.
inhal : for over-expo remove to fresh air. Ingest: obtain immed med
attn.
Hcc: n1
melt/freeze pt: m.P/f.P text: soften@160f
spec gravity: 2.94
solubility in water: negligible
appearance and odor: fine black powder, slight odor.
Stability indicator/materials to avoid: yes
avoid strong oxidizers.
stability condition to avoid: excessive heat or flame.
hazardous decomposition products: carbon dioxide, carbon monoxide.
Waste disposal methods: according to fed reg 40cfr261 matl not haz waste
when discarded.However state/local reqmts may be more
restrictive.Therefore consultation w/proper state/local authorities
is advised.Incinerate only in closed container.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene/acrylate polymer, cas#25213-46-2
fraction by wt: 45-55%
other rec limits: none recommended
ingred name: iron oxide, magnetite
cas: 1317-61-9
fraction by wt: 45-55%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: black pigment
cas: 31714-55-3
fraction by wt: .2-1.5%
other rec limits: none recommended
ingred name: polyolefin, cas#9003-07-0.
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: amorphous silica, cas#68905-20-6.
fraction by wt: .3-1.5%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner powder is not accessible unless
the cartridge is forced to be broken. Inhal: gasping. Do not breathe
dust. Eye: no specific haz is known to american laser. However any
material that contacts eye m ay be irritating. Skin: low haz for
industrial handling. No data available for chronic effects of
overexposure.
explanation of carcinogenicity: per msds: each ingredient is not listed
on ntp/iarc/osha listings.
effects of overexposure: gasping. Eye irritating.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of eye contact flush withh plenty of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: 212f,100c
vapor pres: negligible
spec gravity: 1.4-1.5
evaporation rate & reference: negli (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: toner is powder with slight plastic odor (see
supplemental)
percent volatiles by volume: neglig
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer. However
avoid creating dust-powder form is capable of creating dust
explosion.
hazardous decomposition products: as with any other organic material
combustion will produce carbon dioxide and probably carbon
monoxide.
Waste disposal methods: dispose in an appropriate incinerator or
contract with licensed disposal agency. Disposal may be subject to
fed/state/local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene/acrylate polymer
fraction by wt: 55-65%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: salicylic acid chromium chelate
cas: 72869-85-3
fraction by wt: 1-3%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact-no specific hazard is
known to american laser. However, any material that contacts the
eye may be irritating. Skin-low hazard for industrial handling. No
data available for chronic effects of overexposure.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: inhalation-gasping. Do not breathe the dust.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of eye contact, flush with plenty of water.
Hcc: n1
melt/freeze pt: m.P/f.P text: 100-150c
vapor pres: negligible
spec gravity: 1.4-1.5
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: toner is powder with slight plastic.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: as with any organic material,
combustion will produce carbon dioxide and probably carbon
monoxide.
Waste disposal methods: dispose in an appropiate incinerator or contract
with licensed disposal agency. Disposal may be subject to federal,
state or local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene acrylate copolymer
fraction by wt: 55-65%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 30-40%
other rec limits: none recommended
ingred name: salicylic acid chromiium chelate
cas: 72869-85-3
fraction by wt: 1-3%
other rec limits: none recommended
Ld50 lc50 mixture: acgih tlv for nuissance dust is 10mg/m3
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner contents are not exposed unless
cartridge is forced open or broken.Eyes: may cause
irritation.Skin: may cause irritation.Ingest: unlikely route of
exposure.Inhal: may cause respiratory irritation.
explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.
effects of overexposure: inhal: irritation.Eyes: irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Inhal: remove to fresh
air.Give oxygen or artificial respiration if needed.Ingest: no first
aid should be required.
Hcc: n1
melt/freeze pt: m.P/f.P text: 212f-302f
vapor pres: negligible
spec gravity: 1.4-1.6
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: powder;black.Odor not reported.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: dusty conditions with sources of ignition.
hazardous decomposition products: carbon dioxide,carbon monoxide.
Waste disposal methods: dispose of in accordance with federal,state and
local regulations.Exhausted cartridges may be considered plastic
waste;composed of plastic and metals.
Ingred name: styrene acrylate coploymer
fraction by wt: 45-55%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 45-55%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: contact may cause eye
irritation; repeated contact may cause skin irritation. Inhalation
of dust may cause respiratory irritation. Ingestion may cause
irritation of mucous membranes or digestiv e tract. Chronic: no
known chronic health effects.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: eyes-irritation. Skin-irritation.
inhaled-irritation. Ingested-irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with water for 15 minutes. Get medical attention.
skin-remove contaminated clothes. Wash with mild soap & water. Get
medical attention if irritation persists. Inhaled-remove to fresh
air. I ngested-get immediate medical attention.
Hcc: n1
melt/freeze pt: m.P/f.P text: 160f,71c
vapor pres: negligible
spec gravity: 1.0
solubility in water: negligible
appearance and odor: fine black powder, slight odor.
Stability indicator/materials to avoid: yes
avoid strong oxidizers.
stability condition to avoid: excessive heat or flame.
hazardous decomposition products: carbon dioxide, carbon monoxide.
Waste disposal methods: according to 40cfr261 material not hazardous
waste when discarded.However state/local requirements may be more
restrictive.Therefore consultation with proper state/local
authorities is advised.Inciner ate only in closed container.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene/acrylate polymer
cas: 25213-46-2
fraction by wt: 45-55%
other rec limits: none recommended
ingred name: iron oxide
cas: 1317-61-9
fraction by wt: 45-55%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: black pigmnet or chromate(1-), bis
[1-((5-chloro-2-hydroxy-phenyl)az0)-2-naphtalenolato(2-)]-,hdrogen,
cas: 31714-55-3
fraction by wt: 0.2-1.5%
other rec limits: none recommended
ingred name: polyolefin or polypropylene
cas: 9003-07-0
rtecs #: tr5000000
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: amorphous silica or trimethylated silica
cas: 68909-20-6
fraction by wt: 0.3-1.5%
other rec limits: none recommended
osha pel: 80 mc/m3
acgih tlv: 10 mg/m3
ld50 lc50 mixture: ld50 for this product is not established
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eyes: dust may cause irritation.Skin: unlikely to be
hazardous.Ingest: unlikely route of exposure.Inhal: dust may cause respiratory
irritation.
explanation of carcinogenicity: there are no ingredients above 0.1% which are
identified as carcinogens by ntp,iarc or osha.
signs and symptions of overexposure: eyes/inhal: irritation.
medical cond aggravated by exposure: unlikely to aggrivate existing medical
conditions.
first aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Inhal: remove to fresh air.Give
oxygen or artificial respiration if needed.Ingest: do not induce vomiting. Get
prompt qualified medical attention.
hcc: n1
m.P/f.P text: 248f,120c
decomp text: unknown
spec gravity: 1.3-1.8
solubility in water: insoluble
appearance and odor: powder,fine;black.Odor not reported.
corrosion rate: unknown
product id: 3si/4si toner
cage: 07gv3
company name: laser tek industries
street: 4909 w rt 12
city: richmond il
zipcode: 60071
health emergency phone: 815-675-1199
label required ind: y
date of label review: 04/02/1998
status code: c
mfg label no: unknown
label date: 04/02/1998
year procured: 1995
origination code: f
signal word: caution
health hazard: slight
contact hazard: none
fire hazard: slight
=======================================================
responsible party cage: 07gv3
trans id no: 127444
product id: 3si/4si toner
msds prepared date: 05/10/1994
review date: 04/02/1998
mfn: 1
net unit weight: unknown
af mmac code: nr
multiple kit number: 0
review ind: y
unit of issue: ea
container qty: 1
type of container: cartridge
additional data: none
Hazard and precautions: eyes: dust may cause irritation.Skin: unlikely to be
hazardous.Ingest: unlikely route of exposure.Inhal: dust may cause respiratory
irritation. Store in a cool,dry,well-ventilated place.Keep container clo sed
when not in use. First aid: skin: remove contaminated clothing;wash with soap
and water.Eyes: flush with water for 15 minutes. Inhal: remove to fresh
air.Give oxygen or artificial respiration if need ed. Ingest: do not induce
vomiting.Get prompt qualified medical attention.
spill release procedures: ventilate area.Use proper protective and respiratory
equipment.Sweep or vacuum;do not create dust;place in a dry container for
disposal.Clean spill area with water.
waste disposal methods: dispose of in accordance with federal,state and local
regulations.
handling and storage precautions: store in a cool,dry,well-ventilated place.
keep container closed when not in use.
other precautions: follow label directions.Avoid breathing dust.Avoid skin and
eye contact.
Ld50 lc50 mixture: not provided.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: toner powder is not accessabile,
unless the cartridge is forced to be broken. Effects of
overexposures: inhilation: toner is finely divided solid. Do not
breathe the dust. Eye contact: no specific haza rd is known to
canon. However, any material that contacts the eye may be
irritating. Skin contact: low hazard for induxtrial handling. No
data available for chronic effects or overexposure.
explanation of carcinogenicity: no carcinogen or potential
carcinogen,according to iarc monographs, ntp,osha regulation.
effects of overexposure: toner powder is not accessabile, unless the
cartridge is forced to be broken. Effects of overexposures:
inhilation: toner is finely divided solid. Do not breathe the dust.
eye contact: no specific haza rd is known to canon. However, any
material that contacts the eye may be irritating.
medical cond aggravated by exposure: not provided.
First aid: eye contact: flush with plenty of water. Skin contact: wash
with soap and water.
Hcc: n1
boiling pt: b.P. Text: n/a for solid mixture
melt/freeze pt: =100.C, 212.F
m.P/f.P text: to 150 c
vapor pres: negligible
spec gravity: 1.4 to 1.6
ph: not applicable.
viscosity: not applicable.
evaporation rate & reference: negligible(buac=1)
solubility in water: negligible
appearance and odor: toner is fine powder,with slight plastic odor.
percent volatiles by volume: negligible
corrosion rate: not applicable.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: not provided.
hazardous decomposition products: carbon dioxide and possibly carbon
monoxide.
Waste disposal methods: this product is constructed from plastics and
metals. The waste toner could be considered as plastic waste.
disposal should be subject to federal, state, and local laws.
Ingred name: styrene acrylate copolymer
minumum % wt: 45.
maxumum % wt: 55.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.
ingred name: iron oxide
cas: 1317-61-9
minumum % wt: 45.
maxumum % wt: 55.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.
ingred name: amorphous silica
cas: 7631-86-9
minumum % wt: .5
maxumum % wt: 2.
other rec limits: twa: 80 mg/m3 (mfr)
code: f
acgih tlv: 10 mg/m3 (tdust)
Ld50 lc50 mixture: oral, rat, ld50: >5,000 mg/kg.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingestion: ingestion is not applicable
route of entry for intended use. Inhalation: minimal respiratory
tract irritation may occur with exposure to large amount of toner
dust. Eyes: may cause eye irri tation. Skin: unlikely to cause skin
irritation. Environmental hazards: no particular hazards known.
explanation of carcinogenicity: not a known or suspected carcinogen
according to any iarc monograph, ntp, osha regulations (usa), eu
directive, or proposition 65 (california).
effects of overexposure: ingestion: ingestion is not applicable route of
entry for intended use. Inhalation: respiratory tract irritation.
eyes: irritation. Skin: unlikely to cause skin irritation.
First aid: ingestion: rinse mouth with water. Drink one to two glasses
of water. If symptoms occur, consult a physician. Inhalation: move
person to fresh air immediately. If symptoms occur, consult a
physician. Eyes: immediately flush with large amounts of clean,
lukewarm water (low pressure) for at least 15 minutes. If symptoms
occur, consult a physician. Skin: wash affected areas thoroughly
with soap and w ater, if symptoms occur, consult a physician.
Hcc: n1
melt/freeze pt: =100.C, 212.F
m.P/f.P text: 100-150c softening point
spec gravity: 1.4 -1.6 (h20=1)
solubility in water: negligible
appearance and odor: fine black powder, slight plastic odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
hazardous decomposition products: combustion will produce carbon dioxide
and, possibly toxic chemicals such as carbon monoxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: recommendation: consultation with the disposal
agency and the relevant authorities; cleansing agent is water.
Ingred name: styrene acrylate copolymer
minumum % wt: 45.
maxumum % wt: 55.
ingred name: iron oxide
cas: 1317-61-9
minumum % wt: 45.
maxumum % wt: 55.
ingred name: toner preparation used in hp laser jet cartridge 92291a
= wt: 100.
other rec limits: osha 5 mg/m3 resp.
osha pel: 15 mg/m3 (t. Dust)
acgih tlv: 10 mg/m3(inhalable)