NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical product specially prepared to increase the absorption capacity of the basic chemica (s) for the removal of moisture and capable of being restored to approximately its original condition.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $2,416.59 to $4,027.66.. | |
| Does NSN 6850-01-344-0795 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, and Department Of The Navy | |
| What is the NIIN of NSN 6850-01-344-0795? | |
| 013440795 or 01-344-0795 | |
| Does NSN 6850-01-344-0795 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-344-0795? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 22, 1991 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause eye, skin & mucous
membrane irritation. Chronic: prolonged inhalation may cause lung
damage.
explanation of carcinogenicity: this product and its components are not
listed on the iarc, ntp or osha carcinogens lists.
effects of overexposure: eye/skin/inhal: irritation.
medical cond aggravated by exposure: persons with asthma and of fibrotic
pulmonary diseases(may cause inflammation).
First aid: eyes: flush eyes with water for 15 minutes. Get medical
attention. Skin: wash with soap and water. Inhalation: remove to
fresh air and get medical assistance if necessary. Ingestion: get
medical attent ion.If conscious,give water and induce vomiting.
Hcc: v7
spec gravity: 2.1
appearance and odor: product may appear as a bead, pellet, mesh cake, or
powder. Odorless.
Stability indicator/materials to avoid: yes
sudden contact with high concentrations of chemicals having high heats
of adsorptions(eg.Acids and stong alkali).
stability condition to avoid: moisture (water) can cause rise in
temperature, contact with skin might result in burns.
hazardous decomposition products: unless subjected to extreme
temperatures or chemicals conditions sieve will not readily
decompose.
Waste disposal methods: discard any product, residue, disposable
container or liner in an environmentally acceptable manner in full
compliance with federal, state, local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sodium oxide
cas: 1313-59-3
fraction by wt:
other rec limits: none specified
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3;tdust; 9293
ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none specified
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
Ld50 lc50 mixture: not given for product as a whole
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute exposure may cause eye, skin and
mucous membrane irritation. Prolonged inhalation may cause lung
damage.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: drying and irritation.
medical cond aggravated by exposure: asthma.
First aid: seek medical assistance for further treatment, observation
and support if necessary. Eyes: flush with water for at least 15
minutes. Skin: wash affected area with soap and water. Inhalation:
remove pe rson to fresh air. Ingestion: drink at least 2 glasses of
water.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: =135.C, 275.F
m.P/f.P text: 275f,135c
decomp temp: decomp text: not given
vapor pres: not given
vapor density: not given
spec gravity: 2.1
viscosity: not given
evaporation rate & reference: not given
solubility in water: will absorb moisture
appearance and odor: printed small white pouches containing tan beads,
no odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
water
stability condition to avoid: moisture and high humidity environments.
hazardous decomposition products: carbon monoxide, carbon dioxide,
water, hydrocarbons.
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
Ingred name: silicon dioxide
cas: 14808-57-0
< wt: 50.
other rec limits: none recommended
ingred name: sodium oxide
cas: 1313-59-3
< wt: 30.
other rec limits: none recommended
ingred name: aluminum oxide (non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
< wt: 30.
other rec limits: none recommended
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
other rec limits: none recommended
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3; fume; 9596
ingred name: polyethylene -- high density fiber -- tyvek
rtecs #: pm9002884
minumum % wt: 5.
maxumum % wt: 15.
other rec limits: none recommended
Health hazards acute and chronic: target organs: n/p. Acute: may cause
eye, skin and mucous membrane irritation. Chronic: prolonged
inhalation may cause lung damage.
effects of overexposure: eye, skin and mucous membrane irritation.
medical cond aggravated by exposure: breathing of dust may aggravate
asthma and inflammatory of fibrotic pulmonary disease.
First aid: eye contact: flush eyes with water for 15 minutes and contact
physician. Skin contact: wash affected area with soap and water.
inhalation: remove to fresh air and get medical assistance if
necessary. Ingestion: if ingested in large quantities, drink (2)
glasses of water. Contact physician for permission to induce
vomiting. This product gets hot as it absorbs water. Burns to moist
body can result i f contact is prolonged. No other evidence of
adverse effects from available information. (hmis: see physician)
Hcc: n1
spec gravity: 2.1
appearance and odor: product may appear as a bead, pellet, mesh cake or
powder. odorless.
Stability indicator/materials to avoid: yes
sudden contact with high concentration of chemicals having high heats
due to adsorption.
stability condition to avoid: the addition of water without flooding can
cause a rise in temperature from the heat of adsorption, and
contact with skin might result in burns.
hazardous decomposition products: does not readily decompose. adsorbed
materials such as hydrocarbons will be more easily given off.
Waste disposal methods: discard any product, residue, disposal container
or liner in an environmentally accetable manner in full compliance
with federal, state and local regulations.
Ingred name: sodium oxide (na2o)
cas: 1313-59-3
< wt: 30.
ingred name: magnesium oxide (mgo)
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: aluminum oxide (al2o3) (non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
< wt: 30.
other rec limits: 5 mg/m3 resp dust
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: silicon oxide (sio2)
cas: 7631-86-9
< wt: 50.
other rec limits: 5 mg/m3 resp dust
osha pel: 15 mg/m3 t dust
osha stel: 5 mg/m3 r dust
acgih tlv: 10 mg/m3 t dust
acgih stel: 3 mg/m3 r dust
Ld50 lc50 mixture: not provided.
health hazards acute and chronic: acute: may cause eye, skin and mucous
membrane irritation. Chronic: prolonged inhalation may cause lung
damage.
explanation of carcinogenicity: not provided.
effects of overexposure: drying and irritation.
medical cond aggravated by exposure: asthma.
First aid: seek medical assistance for further treatment, observation
and support if necessary. Eyes: flush with water for at least 15
minutes. Skin: wash affected area with soap and water. Inhalation:
remove pe rson to fresh air. Ingestion: drink at least 2 glasses of
water.
Hcc: n1
boiling pt: b.P. Text: not applicable.
melt/freeze pt: =135.C, 275.F
m.P/f.P text: tyvek
decomp temp: decomp text: not provided.
vapor pres: not applicable.
vapor density: not applic
spec gravity: 2.1(molecular sieve)
ph: not relevant.
viscosity: not relevant.
evaporation rate & reference: not relevant.
solubility in water: insoluble
appearance and odor: printed small white pouches containing tan beads,
no odor
percent volatiles by volume: not applicab
corrosion rate: not provided.
Water
stability condition to avoid: moisture and high humidity environments.
hazardous decomposition products: carbon monoxide, carbon dioxide,
water, hydrocarbons.
Waste disposal methods: dispose in an appropriate landfil according to
federal, state and local regulations.
Ingred name: silicon dioxide
cas: 14808-57-0
< wt: 50.
other rec limits: not provided.
osha pel: 15 mg/m3 (tdust)
acgih tlv: 10 mg/m3 as silicon
ingred name: sodium oxide
cas: 1313-59-3
< wt: 30.
other rec limits: not provided.
ingred name: aluminum oxide (non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
< wt: 30.
other rec limits: none recommended
osha pel: 15 mg/m3 (tdust)
acgih tlv: 10 mg/m3 (tdust)
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
other rec limits: not provided.
osha pel: 15 mg/m3(fume,tdust)
acgih tlv: 10 mg/m3; fume
ingred name: high density polyethylene fiber (tyvek)
rtecs #: pm9002884
minumum % wt: 5.
maxumum % wt: 15.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.