NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical product specially prepared to increase the absorption capacity of the basic chemica (s) for the removal of moisture and capable of being restored to approximately its original condition.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
046050 - Silica gel/catalyst
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
Q - 70.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $270.90 to $451.51.. | |
| Does NSN 6850-01-469-3292 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy, Brazil, Spain, Portugal, Greece, and Turkey | |
| What is the NIIN of NSN 6850-01-469-3292? | |
| 014693292 or 01-469-3292 | |
| Does NSN 6850-01-469-3292 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-469-3292? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Nov 12, 1999 | |
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: unknown osha: no
health hazards acute and chronic: target organ: prolonged or repeated
exposure may cause lung injury. Skin-: the product dust may dry the
skin. This material becomes hot when it first comes into contact w/
moisture. The hot material co uld cause thermal burns. Eye-dust
&/or product may cause eye discomfort &/or irritation seen as
tearing & reddening. Ingestion-the product gets hot as it absorbs
water. Burns to moist body tissues can result if contact is
prolonged. Inhalation-inhalation of product &/or dust may cause
irritation of the respiratory tract. Irritation may be accompanied
by coughing & chest discomfort.
explanation of carcinogenicity: international agency for research on
cancer (iarc): silicon oxide (synthetic)-not classifiable as human
carcinogen (group 3). U.S. National toxicology program (ntp):
neither the product nor the compon ent(s) are classified. U.S.
occupational safety and health administration (osha): neither the
product nor the component(s) are classified or regulated.
First aid: skin: wash affected area with soap and water. Eye: flush with
water for at least 15 minutes. Ingestion: drink at least 2 glasses
of water. Obtain medical attention. Inhalation: remove affected
person to fresh air. If respiratory problems develop, obtain
medical attention. Notes to physician: this product is a desiccant
and generates heat as it absorbs water. The used product can
contain material o f a hazardous nature. Identify that material and
treat symptomatically.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
decomp temp: decomp text: not given
vapor pres: not given
vapor density: not given
spec gravity: 1.1pc; 2.1cryst
ph: 8 - 11
viscosity: na
evaporation rate & reference: not given
solubility in water: not given
appearance and odor: tan pellets/beads, white powder or cake, odor: none.
Stability indicator/materials to avoid: yes
sudden contact with high concentrations of chemicals having high heats
of adsorption such as olefins, hci, etc.
stability condition to avoid: the addition of moisture (water) without
flooding can cause rise in temperature from heat of adsorption.
contact with skin might result in burns.
hazardous decomposition products: hydrocarbons/other materials that
contact the product during normal use can be retained on the
product. It is reasonable to expect that decomposition product will
come from the retained materials used.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with all
applicable goverrnment regulations. "s ee other precaution"
Ingred name: silicon oxide (synthetic)
cas: 112945-52-5
rtecs #: vv7310000
< wt: 50.
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: sodium oxide
cas: 1313-59-3
< wt: 30.
other rec limits: none recommended
ingred name: aluminum oxide (non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
< wt: 30.
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
other rec limits: none recommended
osha pel: 15 mg/m3 particulate
acgih tlv: 10 mg/m3; fume; 9596
Ld50 lc50 mixture: none provided by mfr
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may intensify symptoms of existing
respiratory conditions.
explanation of carcinogenicity: none provided by mfr
effects of overexposure: inhalation: may cause upper respiratory
irritation: skin: may cause redness & irritation. Ingestion: if
swallowed in large amounts, may cause irritation.
medical cond aggravated by exposure: emphasema, asthma.
First aid: eye contact: flush thoroughly with water, skin contact: wash
with soap & water. Inhaled: remove to fresh air. Swallowed: induce
vomiting if large amounts swallowed.
Hcc: n1
melt/freeze pt: =1926.7c, ######f
decomp temp: decomp text: none provided by mfr
spec gravity: 2.1 (h20=1)
ph: not provided
viscosity: none provided by mfr
appearance and odor: granules, beads or pellets, no odor, buff color.
percent volatiles by volume: none provide
corrosion rate: none provided by mfr
Stability indicator/materials to avoid: yes
none known
stability condition to avoid: none known
hazardous decomposition products: none known
Waste disposal methods: bag or can to minimize dust. Suitable for
landfill disposal.
Ingred name: sodium oxide
cas: 1313-59-3
< wt: 30.
other rec limits: not provided
ingred name: silicon oxide
cas: 7631-86-9
< wt: 50.
other rec limits: not provided
osha pel: 10 mg/m3
acgih tlv: 20 mppcf
acgih stel: 5 mg/m3 (rdust)
ingred name: aluminum oxide
cas: 1344-28-1
rtecs #: bd1200000
< wt: 40.
other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
acgih stel: 5 mg/m3 (rdust)
Ld50 lc50 mixture: not provided
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organ: prolonged or repeated
exposure may cause lung injury. Skin contact: the product dust may
dry the skin. This material becomes hot when it first comes into
contact with moisture. The hot m aterial could cause thermal burns.
eye contact: dust and/or product may cause eye discomfort and/or
irritation seen as tearing and reddening. Ingestion: the product
gets hot as it absorbs water. Burns to moist body tissues can
result if contact is prolonged. Inhalation: inhalation of product
and/or dust may cause irritation of the respiratory tract.
irritation may be accompanied by coughing and ch est discomfort.
explanation of carcinogenicity: international agency for research on
cancer (iarc): silicon oxide (synthetic) - not classifiable as
human carcinogen (group 3). U.S. National toxicology program (ntp):
neither the product nor the comp onent(s) are classified. U.S.
occupational safety and health administration (osha): neither the
product nor the component(s) are classified or regulated.
effects of overexposure: skin contact: the product dust may dry the
skin. This material becomes hot when it first comes into contact
with moisture. The hot material could cause thermal burns. Eye
contact: dust and/or product may cause eye discomfort and/or
irritation seen as tearing and reddening. Ingestion: the product
gets hot as it absorbs water. Burns to moist body tissues can
result if contact is prolonged. Inhalatio n: inhalation of product
and/or dust may cause irritation of the respiratory tract.
irritation may be accompanied by coughing and chest discomfort.
medical cond aggravated by exposure: not provided
First aid: skin contact: wash affected area with soap and water. Eye
contact: flush with water for at least 15 minutes. Ingestion: drink
at least 2 glasses of water. Obtain medical attention. Inhalation:
remove affected person to fresh air. If respiratory problems
develop, obtain medical attention. Notes to physician: this product
is a desiccant and generates heat as it absorbs water. The used
product can co ntain material of a hazardous nature. Identify that
material and treat symptomatically.
Hcc: b3
nrc/state lic num: not relevant
decomp temp: decomp text: not provided
spec gravity: 1.1pc; 2.1cryst
ph: 8 - 11(slurry)
solubility in water: not available
appearance and odor: tan pellets/beads, white powder or cake, odor: none.
percent volatiles by volume: n/av
corrosion rate: not provided
State regulatory information: state community right-to-know legislation:
the following components of this product are regulated under
california`s proposition 65: none.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with all
applicable goverrnment regulations.
Ingred name: silicon oxide (synthetic)
cas: 112945-52-5
rtecs #: vv7310000
< wt: 50.
other rec limits: not provided
osha pel: 15 mg/m3 (tdust)
osha stel: 5 mg/m3 (rdust)
acgih tlv: 10 mg/m3 (tdust)
acgih stel: 3 mg/m3 (rdust)
ingred name: sodium oxide
cas: 1313-59-3
< wt: 30.
other rec limits: not provided
ingred name: aluminum oxide (non-fibrous)
cas: 1344-28-1
rtecs #: bd1200000
< wt: 30.
other rec limits: not provided
osha pel: 15 mg/m3 tdust
osha stel: 5 mg/m3 (rdust)
acgih tlv: 10 mg/m3 (tdust)
acgih stel: 3 mg/m3 (rdust)
ingred name: magnesium oxide
cas: 1309-48-4
rtecs #: om3850000
< wt: 5.
other rec limits: not provided
osha pel: 15 mg/m3 (tdust)
acgih tlv: 10 mg/m3 (fume)