Worldwide distributor of NSN parts and consumables located in the USA.
An item in liquid, plastic or sheet form used to remove ink, dirt, erasure dust, and the like from type on typewriters and similar printing equipment.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $29.12 to $48.53.. | |
Does NSN 7510-00-527-1458 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Brazil, Spain, New Zealand, Germany, United Kingdom, and Italy | |
What is the NIIN of NSN 7510-00-527-1458? | |
005271458 or 00-527-1458 | |
Does NSN 7510-00-527-1458 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 7510-00-527-1458? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Effects of overexposure: anesthetic effects-may occur in the range of
500 to 1000ppm.Physician: over exposure to any chlorinat
First aid: eyes and skin: flush eyes w/plenty of water;for both eyes &
skin get dr. If irrit. Injury develops.Inhal: if breathing
stops,give artificial respiration.Get medical help.Remove to fresh
air,keep warm & quiet until recovered.
Hcc: t4
boiling pt: b.P. Text: 165 f 74 c
vapor pres: 100
vapor density: 4.55
spec gravity: 1.319@
solubility in water: insol (0.07
appearance and odor: colorless liquid
percent volatiles by volume: 100%
Stability indicator/materials to avoid: yes
water
stability condition to avoid: open flames,welding area or other ghigh
temp.Sources which i
hazardous decomposition products: open flames,& welding areas can cause
thermal degradation w/
Waste disposal methods: send solvent to a reclaimer.In some cases it can
be transportated to an area where it can be placed on the ground
and allowed to evaporate safely.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: chlorinated solvent
ingred name: solvents
fraction by wt: 94.5%
ingred name: 1,1,1. Trichloroethane
rtecs #: yb2500000
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact can cause severe
irritation. Skin contact can cause defatting and dermatitis and
should be limited. Ingestion can be harmful.
explanation of carcinogenicity: this product has not been found to be
carcinogenic or potential carcinogen by ntp, iarc or osha.
effects of overexposure: this product is condidered safe when used under
normal use conditions. Excessive vapors can cause dizziness, nausea
& headaches.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with water and contact physician if contact
occurs. Ingestion-do not induce vomiting.
Hcc: n1
boiling pt: b.P. Text: 160-190
vapor pres: 135 @ 25c
vapor density: 4.5
spec gravity: 1.3-1.33
evaporation rate & reference: 0.35 (ether=1)
solubility in water: negligible
appearance and odor: clear liquid, ether-like odor.
Stability indicator/materials to avoid: yes
water reactive metals, open flames, strong oxidizing agents.
stability condition to avoid: not available.
hazardous decomposition products: hydrogen chloride, phosgene, chlorine.
Waste disposal methods: discard as solid waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: ethane, 1,1,1-trichloro-; (1,1,1-trichloroethane) (sara
iii).
cas: 71-55-6
rtecs #: kj2975000
osha pel: 350 ppm;450 ppm stel
acgih tlv: 350 ppm;450 ppm stel
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ozone depleting chemical: 1
ingred name: stabilizers (including ingredients 3 & 4)
rtecs #: 9999999zz
ingred name: 1,3-dioxolane; (glycol methylene ether)
cas: 646-06-0
rtecs #: jh6760000
ingred name: sec-butyl alcohol; (sec butanol) (sara iii)
cas: 78-92-2
rtecs #: eo1750000
osha pel: 150 ppm
acgih tlv: 100 ppm; 9293
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may cause pain, slight irritation
with temporary corneal injury. Skin: prolonged or repeated exposure
may cause skin irritation. May cause drying or flaking. Not likely
to result in absorbtion of harmful amounts. Inhalation: can cause
anesthetic effect, dizziness, unconsiousness and death at high
concentrations.
effects of overexposure: based on available data, repeated exposure not
likely to cause significant adverse effects. birth defects are
unlikely.
medical cond aggravated by exposure: overexposure if accompanied
byanoxia may temporarily increases cardiac irritability. Avoid
administering adrenilin, epimephriline which may precipitate
arrhythmias.
First aid: eyes: irrigate immediately with water at least 15 minitues.
skin: wash off in flowing water. Ingestion: do not induce vomiting.
call doctor. Inhalation: remove to fresh air. Administer oxygen or
mouth -to-mouth resusitation if not breathing.
Boiling pt: =74.C, 165.2f
b.P. Text: 74c 165f
vapor pres: 100 @ 20c
vapor density: 1.321
solubility in water: 0.07g/100g @ 25c
appearance and odor: colorless liquid irritating odor at high
concentrations
Stability indicator/materials to avoid: yes
prolonged contact with aluminium and related allous (zinc powder) this
can cause hydrochloric acid gas to form and rupture container also
contact with caustic soda or other oxidizing materials.
stability condition to avoid: high tempatures sources. Avoid open flame.
welding arcs and other sources which induce thermal decomposition.
hazardous decomposition products: hydrogen chkloride and possiable
traces of phosqene.
Waste disposal methods: preferred options are to send to licensed
reclaimer or to permitted incinerators. Disposal must be in
compliance with federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 1,1,1-trichloroethane
cas: 71-55-6
rtecs #: kj2975000
= wt: 100.
osha pel: 350 ppm
acgih tlv: 350 ppm
acgih stel: 450 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ozone depleting chemical: 1