NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A polishing media which may contain wax with abrasive additives such as silicone, compounded primarily for use on automobile surfaces. Does not include wax, automobile.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Polishes and creams etc, nesoi
Polishes, creams and similar preparations (except artificial and prepared waxes), for glass or metal
Other consumer nondurables
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
033440 - Buffing r polishing compound noi
766 - Polishing compound
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $492.64 to $821.07.. | |
| Does NSN 7930-00-721-8873 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| No recorded entities for this stock number. | |
| What is the NIIN of NSN 7930-00-721-8873? | |
| 007218873 or 00-721-8873 | |
| Does NSN 7930-00-721-8873 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 7930-00-721-8873? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1961 | |
First aid: ing: induce vomiting, call md. Skin/eyes: flush thoroughly
w/water at least 15 mins. Call md.
Hcc: n1
boiling pt: b.P. Text: 212f,100c
spec gravity: 1.1
evaporation rate & reference: 1.0, water
solubility in water: dispersable
appearance and odor: mild solvent odor
percent volatiles by volume: 65
Stability indicator/materials to avoid: yes
Waste disposal methods: dispose of in accordance w/local,state 6 federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: stoddard solvent
cas: 8052-41-3
rtecs #: wj8925000
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293
ingred name: oils
ingred name: clays & abrasives
fraction by wt: 30%
ingred name: wetting agents; in combination w/detergents is 5% of
product.
ingred name: detergents (see supp data)
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: primary eye & skin irritant
with contact. Inhalation: may cause headache, dizziness & nausea.
chronic: not sufficient data, exercise care, do not use above tlv.
First aid: eye contact: flush with water; skin: wash with soap & water,
apply skin cream. Inhalation: remove to fresh air,restore
breathing,call physician. Ingestion: drink water or milk, do not
induce vomiting-ca ll poison control.
Boiling pt: b.P. Text: 215f
vapor pres: 2
vapor density: 3.8
spec gravity: 1.1
evaporation rate & reference: water 0.8
solubility in water: partial
appearance and odor: green creamy liquid.
percent volatiles by volume: 74
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: heat,sparks,open flame & fire.
hazardous decomposition products: thermal decomposition produces fumes
may yield carbon monoxide.
Waste disposal methods: incinerate or dispose of iaw local,state and
federeal regulations. Empty containers may retain fumes. Do not
expose to heat or flame.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: stoddard solvent
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 17%
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: primary eye/skin irritant with
contact. Inhalation: headache, dizziness & nauseachronic: not
sufficient data, exercise care, do not use above tlv
effects of overexposure: nk
primary eye/skin irritant with
contact. Inhalation: headache, dizzingess & nausea chronic: not
sufficient data, exercise care, do not use above tlv
First aid: eye contact: flush with water, skin: wash with soap & water,
apply skin cream. inhalation: remove to fresh air, restore
breathing, call physician. Ingestion: drink water or milk, do not
induce vomit ing. Call poison control
Boiling pt: b.P. Text: 215
vapor pres: 2
vapor density: 3.8
spec gravity: 1.1
evaporation rate & reference: 0.8 water
solubility in water: partial
appearance and odor: green creamy liquid
percent volatiles by volume: 74
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat, sparks, open flame and fire
hazardous decomposition products: thermal decompostion produces fumes
may yield carbon mon- oxide
Waste disposal methods: incinerate or dispose of in accordance with
local state & federal regulations. Empty containers may retain
fumes. Do not expose to heat or flame
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: stoddard solvent
cas: 8052-41-3
rtecs #: wj8924000
fraction by wt: 17%
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: unknown iarc: unknown osha: no
health hazards acute and chronic: acute: causes eye irritation, drying
of skin, dizziness. Chronic: respiratory tract irritation,
dermatitis. Target organs: skin, eyes, respiratory system.
effects of overexposure: excessive inhalation may cause headache,
dizziness.
medical cond aggravated by exposure: dermatitis. Broncho-pulmonary
problems.
First aid: eye & skin contact: blot with towel, flush with large
quantities of water. Inhalation: remove to fresh air. Ingestion:
induce vomiting, get immediate medical attention.
Boiling pt: b.P. Text: 230f,110c
vapor pres: 2.0
vapor density: 4.7
spec gravity: 0.82 (water=1)
ph: 8.2+/-
viscosity: 200 cps
evaporation rate & reference: 0.06 (bu ac=1)
solubility in water: appreciable
appearance and odor: green, emulsion, citrus odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: heat, sparks, open flame and fire.
hazardous decomposition products: thermal decomposition may yield carbon
monoxide and dioxide.
Waste disposal methods: recycle, incinerate, or use hazardous waste
management facility for disposal according to state and federal
regulations. Epa waste no. D001.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: stoddard solvent
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt:
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293